I am using the following code to try and send a workbook via attachment to multiple email recipients however it will not work. If I only include one recipient then the code runs fine however it crashes when there is more than one.
View 8 RepliesMy vb code works well for sending worksheets to multiple recipients (about 400 rows) IF I have only one email address in a cell, however, I have some rows that have more than one email address (eg. bob@hotmail.com, dan@gmail.com). I've spent hours researching a clean way to do this and I think I need to be able to extract each of them and assign them to a variable to use in an array???
I'm using Lotus Notes 6.5 and Excel 2003.
'Here is where I get the email address to put in the mailAddress variable
Workbooks("GSA Mileage Report.xls").Activate
mailAddress = ""
On Error Resume Next
mailAddress = Application.WorksheetFunction. _
VLookup(EmailAddrSheet.Cells(RowNum, 1).Value, _
Worksheets("MailInfo").Range("A1:B" & _
Worksheets("MailInfo").Rows.Count), 2, False)
On Error GoTo 0
I feel like I almost have the Excel button I need (thanks to an exhaustive forum search), but I have 2 problems that I need help to correct. First, the code works fine if I have one email address in my Email column, but If I add a second or third email in my column, the code sends the mail, but bounces back because of an Invalid Internet address specified error. The response looks to me like it is taking the first address and appending to the second email recipient. An example would be <example@example.com,example>@example.com. Here is the code I am using:
View 3 Replies View RelatedI have a macro currently using the activeworkbook.sendmail command to send out an email using LOTUS NOTES with the workbook as an attachment. Unfortunately, the code appears to only support putting recipients in the TO field. I need to be able to also add additional recipients under the CC field.
View 1 Replies View Relatedget the code for sending multiple emails as per the spreadsheet list. Assume the spreadsheet has 100 line items and each columns specifies the name of the person, value, recipient email address ("To" and "CC") and sender name.
And the Body of text is :
Hi "Name of the person" Please find the value of "Value" to be paid for the moth of xxx and kindly let me know for further clarification.
I'm not sure if this is a macro problem or an Outlook problem. I'm using the routine below to email a group of recipients through Outlook (not Outlook Express). The routine works fine for one recipient, but doesn't seem to work for multiples. I searched online, and found a solution of putting the email addresses like this:
"Joe@email.com;Bob@email.com;Mary@email.com"
That didn't work, so I tried it below with AND, which also doesn't work. What happens in both examples is that Outlook tells me something else is sending a message, and do I want to allow it (same as message when I send to a single recipient). I say "yes", it appears to go through, but nothing is sent from my outbox. Here's the
I have obtained the following code which works great apart from the fact that I want to just send one email to all addressees instead of multiple emails.
View 11 Replies View RelatedHere is my code below for a program that opens a user interface, lists all the names of tabs in the spreadsheet in a list box. By selecting an item (or sheet name) in the list box then clicking "email" a specific area of that selected sheet is sent to an email address located on the sheet.
What I would like to have happen is with the click of a button email each sheet to the specified email address. So if there were 100 sheets rather than clicking on each name then clicking email, have one button to email the each individual sheet to the associated email address. I am guessing something like a "For" loop would be required but am not quite sure how to implement.
Code:
Private Sub CommandButton2_Click()
ActiveWorkbook.Close
End Sub
Private Sub ListBox1_Click()
'this will set the label caption depending on which sheet is selected in the list box
Label1.Caption = Sheets(ListBox1.Value).Range("b2").Value
[Code] ..........
My Macro sends a PDF to a "To:" recipient and a "CC:" recipient. Both email addresses are referenced from cells. Here are the first four lines of the code:
With OutMail
.SentOnBehalfOfName = "myaddress@mycompanyname.com"
.to = Sheets("Sheet1").Range("N8").Value
.CC = Sheets("Sheet1").Range("T8").Value
The code works great right now. However.......
I've added another email address to Sheet1. The address is in U8. I need it to be the SECOND CC. I could BCC it easily, but that is not an option.
Code I would add behind .CC = Sheets("Sheet1").Range("T8").Value to make it also CC the email address in U8?
I'm trying to email multiple worksheets from a list to multiple recipients in a list, but in one file per person. In a sheet called "Email list", for example, I have a list of 50 worksheet names (e.g. one for each cost centre) in column A (with a heading in cell A1, if that's OK, so the list starts in A2) and in columns B-F up to 5 recipients for each worksheet (e.g. 3 recipients might be 2 supervisors and their manager).
Also, each manager and supervisor might also receive several sheets.
Although columns B-F are presently free-format (they can be anyone's email address, regardless of whether they're a supervisor or manager), it might be easier to split these columns so B,C,D are supervisors emails and E,F are managers, if that makes it any easier creating the collated file of worksheets..?
Unfortunately the recipients might change occasionally so they can not be hard keyed into the macro itself (which would be much easier), but need to be in a table so it's easier for the user to update and maintain - in the past, I've managed to hard key the requirement into a macro which I've maintained (by recording and editing the macro), but I don't know the VB to figure this new request.
Ideally, I am trying to create a macro that can collate the various worksheets each person will receive and send the selected sheets in one file to that recipient, rather than multiple files within one email and/or multiple emails.
I have searched high and low on the forum and can not seem to find a solution to my problem. Here is my problem (besides being new to Lotus Notes): I need a button on my excel worksheet that gets information from Column H in the attached spreadsheet and puts all the emails in the To: (could be >than 100 email addresses) Field in Lotus Notes. I would like to have the subject read "New Email from Your Basin Coordinator" and have the CC list come from a second worksheet (CC).
View 4 Replies View RelatedI am using the following code and it works great the only problem is that when I have more then one email address in the same cell it will not send the email. Even if I seperate it with a semicolon. It work fine if I have just one email address in the email field. How can I get it to send the same info to different email addresses.
View 4 Replies View RelatedI have a macro that will send an excel workbook by email when an image is 'Clicked on' however, I need the attachment to be renamed as the text used in cell B9 of this worksheet.
So far I have the macro below which auto populates the 'email to' address and the 'subject' line which is great but how do I get to rename the attachment?
Sub SendIt()
Application.Dialogs(xlDialogSendMail).Show
arg1:="test@test.com", _ arg2:="test 1" End Sub
Does anyone know if its possible to run a macro to send email before the workbook is closed?
I know theres a code for it
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Right now, it seems like my macro is send email macro is not running when i close the workbook.
I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc
I have a master that which will contain the branch in the first column.
I have defined the directory location in a separate sheet as well as email template.
When I click on the Send Email button I want ti to attach the files that match the Branch name.
The Branch list will constantly grow.
I did this 10 years ago so I admit I am rusty at this but here are what I had in my notes that worked with Excel XP. I am currently using Excel 2010
With ThisWorkbook
.HasRoutingSlip = True
With .RoutingSlip
[Code]....
The last line will send the workbook but I need a Subject and Message to go with it.
I need a code to convert different excel files into pdf and send to different recipients.
View 3 Replies View RelatedI am using 2007. This may be something simple but I can't seem to find a solution to this, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file here is the code used for the tasks in the
workbook:Sub Step1_Refresh()
'
' Step1_Refresh Macro
'
'
ActiveWorkbook.RefreshAll
End Sub
Sub step2_save_close()
[Code] ........
I am using 2007, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file.
Here is the code used for the tasks in the:
workbook:Sub Step1_Refresh()
'
' Step1_Refresh Macro
'
'
[Code]....
I have a list of email addresses in the range K10:K33, (one address per row).
How can I use that range as the 'To' field of an email address, putting a ';' between each name?
This is what I am using at the moment but I want to amend it to do the above;
Code:
Sub Mail_Selection_Range_Outlook_Body1()
Dim rng As Range
Dim OutApp As Object
[Code]....
I am trying to send to multiple people so everyone sees each other received the email. How would I add other addresses?
View 2 Replies View RelatedAm trying for a code which will send mail to recipients mentioned in column A [to] Coulmn B [CC] & formatted range should be pasted as body of email lets say C:F. Each time formatted header should remain same is it will contain column heading. I have a code which sends mail to specified recipients mentioned in code .
Code:
Sub Send_Formatted_Range_Data() Dim oWorkSpace As Object, oUIDoc As Object Dim rnBody As Range Dim lnRetVal As Long Dim WB6 As Workbook Set WB6 = Application.Workbooks.Open("C:TESTDaily_BKG.XLS") Const stTo As String =
[Code]....
I found the following macro after much digging and got it to work for me, but I'd like to go one better. Currently it sends a simple breakdown of orders that need to be placed. The data lies in a sheet called "Orders" where column A is the vendor name and column B is the order total.
This data is pulled from numerous other sheets, one for each vendor. What would be awesome is if I could send each vendor an email consisting of:
1. Item Number - Column C
2. Item Description - Column D
3. My Cost - Column F
4. Quantity to Order - Column J
5. Order Total - Column K
The complications I've thought of so far:
1. Each sheet is an inventory for the items we have from that vendor. It could be just a few items, or it could be two hundred.
2. There is one row per item, but not every item will have need to be ordered. I don't want an item to be included in the email unless there is an order quantity in column J associated with it.
3. Each sheet should be emailed to a different address which I'll put in A1 for that sheet.
I'm thinking I should do this under each sheet so I can just hit a button on that vendor's sheet and send each order independently.
Code:
Sub LNotesEmailPartsOrders()
Dim NSession As Object
Dim NDatabase As Object
Dim NUIWorkSpace As Object
Dim NDoc As Object
Dim NUIdoc As Object
[Code]....
I used Scheduled Task to set up my spreadsheet to open daily. I have the code with assistance to pull out the due date items and place them into an email.
I have come across XLSTART/AUTOEXEC/ACTIVATE...ETC...
But cannot figure out the code that will automatically "enabling macro" once Scheduled Task opens the spreadsheet?
Then once the macro runs, the email with the due dates, how can this auto send without user interaction?
(currently I would have to hit send)
I am trying to make the process totally automated to open the spreadsheet at a certain time, send the email with due dates and close the spreadsheet.
Following code in ThisWorkbook--
Private Sub Workbook_Open()
Check_Date_Send_Mail
End Sub
Code in Module1--
Option Explicit
Sub Check_Date_Send_Mail()
Dim wbBook As Workbook
Dim wsSheet As Worksheet
Dim rnDate As Range, rnValue As Range
Dim stAddress As String, stMsg As String
Dim stRecipient As String, stSubject As String
Dim stPost As String
Set wbBook = ThisWorkbook
Set wsSheet = wbBook.Worksheets("Sheet1")
With wsSheet
Set rnDate = .Range("d2:t23")
End With
I have an excel sheet with 25,000+ emails in column A with hyperlinked emails addresses, Column B has different Subject lines based on the category the clients belongs to but on the same sheet, Column C has the following hyperlink :
=HYPERLINK("mailto:"&A2&"?subject="&B2,"Email")
To create a hyperlink of the email address with the desired subject line.
macros that i could use to open about 25/50 outlook message with the email ids in column A of the sheet and the subject lines in column B.
I don't want the messages to be sent automatically but i want to have the option to change the body of the email if necessary.
Auto generating an e-mail that will consolidate duplicate rows for 'column a' in my attachment. The key here isn't necessarily deleting the rows... What i really need is vba code that will enumerate through the table and auto generate an e-mail for each individual. For each individual, i need the code to generate a table in the body of the e-mail & attach the activity for that recipient and the date. The trip up here is when a recipient has two activities associated to their name, and their name shows up multiple times in the data set.
I need the code to
a) identify the duplicate recipient,
b) send out 1 email for that person, and
c) attach each activitiy/date (2 or more) to a table.
Automate the Consolidation of Duplicate Recipients to 1 Email (2).xlsm
I been trying to create stuff that will make my work life real easy. I need creating a program that will send an email to different recipients. I created a spreadsheet the contains different information. When a persons name is selected on Column D, excel/outlook will generate an email to that person containing the info on Column A to D.
And then as soon as the work is processed and column G is filled, outlook will generate an email back to who created the requests column A.
I have been trying to write a couple of macros;
1) save file as pdf, to be saved as filename=(cell in A1 & todays date (format yyyy-mm-dd)) and overwrite any existing file of the same name.
2) Email the pdf to a set of recipients round in Range "A2:A3", and subject = (cell in A1 & todays date (format yyyy-mm-dd))
I have specified the email addresses in the code to whom the email will be sent when the user presses "Send Email" button but now I want to add all the addresses in the Access table and write down the code that will send an email to those people whose addresses are in the Access table.
[Code] .....
I have a macro to send emails to a group people that based on various criteria, it will attach a number of files to a recipient's particular email. This is a small portion of the code that does the attachment adding:
Code:
If Range("B" & a) = "Y" Then
If citChev "" Then .Attachments.Add citChev
End If
If Range("C" & a) = "Y" Then
If citMits "" Then .Attachments.Add citMits
End If
If Range("D" & a) = "Y" Then
If citToyo "" Then .Attachments.Add citToyo
End If
If Range("E" & a) = "Y" Then
[code].....
Most people get several of the files attached to their email and all works fine. But, there are certain conditions when all the IF() stmts fail where a recipient will not get any files attached. I do not want to send the email if this is the case, but it currently is sending it.
Is there a way after all the IF() stmts have processed to check to see if this current email has any attachments assigned to it? (IF .Attachments "" Then...) does not work.