Macros To Email Recipients List On Excel?
Apr 30, 2014
I have an excel sheet with 25,000+ emails in column A with hyperlinked emails addresses, Column B has different Subject lines based on the category the clients belongs to but on the same sheet, Column C has the following hyperlink :
=HYPERLINK("mailto:"&A2&"?subject="&B2,"Email")
To create a hyperlink of the email address with the desired subject line.
macros that i could use to open about 25/50 outlook message with the email ids in column A of the sheet and the subject lines in column B.
I don't want the messages to be sent automatically but i want to have the option to change the body of the email if necessary.
View 4 Replies
ADVERTISEMENT
Jan 2, 2014
I would like to generate a blank email with a list of recipients (no more than 40) in the 'To' field. I would like to do this in a single click on a cell with the text 'newsletter group' in it (cell B17). The recipients email addresses are in the format of one complete email address per cell in a column starting at C17 (C17, C18, C19, etc...). I thought I had found a way to do this (using the hyperlink function I think, but can't quite remember)but it turned out you could only string together about 8 email address before the function stopped working.
Also just to be clear, I don't want to send the workbook to the recipients.
View 4 Replies
View Related
Mar 4, 2014
I have been trying to write a couple of macros;
1) save file as pdf, to be saved as filename=(cell in A1 & todays date (format yyyy-mm-dd)) and overwrite any existing file of the same name.
2) Email the pdf to a set of recipients round in Range "A2:A3", and subject = (cell in A1 & todays date (format yyyy-mm-dd))
View 5 Replies
View Related
Aug 18, 2014
I'm trying to create a macro the saves a report and then opens an email dialogue box populating the recipients from a list. I have the following code so far but the receivers are constant.
[Code] .....
I have attached a simplified example of the list. The list is always sorted by time and date. Not including headers, the list can be from 1 to an unspecified number of users long and users may repeat throughout the list any number of times.
The user name always appears as their email address prefix and the email address will always end in "@example.com".
I am aware that a loop could perform this task but do not know how to employ it in this case as it must not repeat recipients and will also need to populate the EmTo line. Possibly a second loop for this?
Attached File : Report Test.xlsx
View 3 Replies
View Related
Mar 26, 2014
I been trying to create stuff that will make my work life real easy. I need creating a program that will send an email to different recipients. I created a spreadsheet the contains different information. When a persons name is selected on Column D, excel/outlook will generate an email to that person containing the info on Column A to D.
And then as soon as the work is processed and column G is filled, outlook will generate an email back to who created the requests column A.
View 7 Replies
View Related
Jun 4, 2014
My Macro sends a PDF to a "To:" recipient and a "CC:" recipient. Both email addresses are referenced from cells. Here are the first four lines of the code:
With OutMail
.SentOnBehalfOfName = "myaddress@mycompanyname.com"
.to = Sheets("Sheet1").Range("N8").Value
.CC = Sheets("Sheet1").Range("T8").Value
The code works great right now. However.......
I've added another email address to Sheet1. The address is in U8. I need it to be the SECOND CC. I could BCC it easily, but that is not an option.
Code I would add behind .CC = Sheets("Sheet1").Range("T8").Value to make it also CC the email address in U8?
View 1 Replies
View Related
Dec 11, 2009
I'm not sure if this is a macro problem or an Outlook problem. I'm using the routine below to email a group of recipients through Outlook (not Outlook Express). The routine works fine for one recipient, but doesn't seem to work for multiples. I searched online, and found a solution of putting the email addresses like this:
"Joe@email.com;Bob@email.com;Mary@email.com"
That didn't work, so I tried it below with AND, which also doesn't work. What happens in both examples is that Outlook tells me something else is sending a message, and do I want to allow it (same as message when I send to a single recipient). I say "yes", it appears to go through, but nothing is sent from my outbox. Here's the
View 2 Replies
View Related
Jan 23, 2010
I have obtained the following code which works great apart from the fact that I want to just send one email to all addressees instead of multiple emails.
View 11 Replies
View Related
May 4, 2009
I feel like I almost have the Excel button I need (thanks to an exhaustive forum search), but I have 2 problems that I need help to correct. First, the code works fine if I have one email address in my Email column, but If I add a second or third email in my column, the code sends the mail, but bounces back because of an Invalid Internet address specified error. The response looks to me like it is taking the first address and appending to the second email recipient. An example would be <example@example.com,example>@example.com. Here is the code I am using:
View 3 Replies
View Related
Apr 6, 2012
I found the following macro after much digging and got it to work for me, but I'd like to go one better. Currently it sends a simple breakdown of orders that need to be placed. The data lies in a sheet called "Orders" where column A is the vendor name and column B is the order total.
This data is pulled from numerous other sheets, one for each vendor. What would be awesome is if I could send each vendor an email consisting of:
1. Item Number - Column C
2. Item Description - Column D
3. My Cost - Column F
4. Quantity to Order - Column J
5. Order Total - Column K
The complications I've thought of so far:
1. Each sheet is an inventory for the items we have from that vendor. It could be just a few items, or it could be two hundred.
2. There is one row per item, but not every item will have need to be ordered. I don't want an item to be included in the email unless there is an order quantity in column J associated with it.
3. Each sheet should be emailed to a different address which I'll put in A1 for that sheet.
I'm thinking I should do this under each sheet so I can just hit a button on that vendor's sheet and send each order independently.
Code:
Sub LNotesEmailPartsOrders()
Dim NSession As Object
Dim NDatabase As Object
Dim NUIWorkSpace As Object
Dim NDoc As Object
Dim NUIdoc As Object
[Code]....
View 2 Replies
View Related
Apr 15, 2013
I have a macro currently using the activeworkbook.sendmail command to send out an email using LOTUS NOTES with the workbook as an attachment. Unfortunately, the code appears to only support putting recipients in the TO field. I need to be able to also add additional recipients under the CC field.
View 1 Replies
View Related
Aug 19, 2014
Auto generating an e-mail that will consolidate duplicate rows for 'column a' in my attachment. The key here isn't necessarily deleting the rows... What i really need is vba code that will enumerate through the table and auto generate an e-mail for each individual. For each individual, i need the code to generate a table in the body of the e-mail & attach the activity for that recipient and the date. The trip up here is when a recipient has two activities associated to their name, and their name shows up multiple times in the data set.
I need the code to
a) identify the duplicate recipient,
b) send out 1 email for that person, and
c) attach each activitiy/date (2 or more) to a table.
Automate the Consolidation of Duplicate Recipients to 1 Email (2).xlsm
View 1 Replies
View Related
Nov 23, 2008
I am using the following code to try and send a workbook via attachment to multiple email recipients however it will not work. If I only include one recipient then the code runs fine however it crashes when there is more than one.
View 8 Replies
View Related
Oct 17, 2011
Here is my code below for a program that opens a user interface, lists all the names of tabs in the spreadsheet in a list box. By selecting an item (or sheet name) in the list box then clicking "email" a specific area of that selected sheet is sent to an email address located on the sheet.
What I would like to have happen is with the click of a button email each sheet to the specified email address. So if there were 100 sheets rather than clicking on each name then clicking email, have one button to email the each individual sheet to the associated email address. I am guessing something like a "For" loop would be required but am not quite sure how to implement.
Code:
Private Sub CommandButton2_Click()
ActiveWorkbook.Close
End Sub
Private Sub ListBox1_Click()
'this will set the label caption depending on which sheet is selected in the list box
Label1.Caption = Sheets(ListBox1.Value).Range("b2").Value
[Code] ..........
View 8 Replies
View Related
Mar 2, 2014
I am new to excel macros and writing automation code....I work for a company that sells special permits and so far i have written a macro to bring up a pop up box when a permit has expired but i also want to be alerted by email, how can I do this, also is there anyway to stop the macro from running once it finds all of the expired permits? I usually press ctrl + break....
I have attached the file to this post : Book1.xlsm
View 14 Replies
View Related
May 3, 2009
I have searched high and low on the forum and can not seem to find a solution to my problem. Here is my problem (besides being new to Lotus Notes): I need a button on my excel worksheet that gets information from Column H in the attached spreadsheet and puts all the emails in the To: (could be >than 100 email addresses) Field in Lotus Notes. I would like to have the subject read "New Email from Your Basin Coordinator" and have the CC list come from a second worksheet (CC).
View 4 Replies
View Related
Jan 6, 2009
My vb code works well for sending worksheets to multiple recipients (about 400 rows) IF I have only one email address in a cell, however, I have some rows that have more than one email address (eg. bob@hotmail.com, dan@gmail.com). I've spent hours researching a clean way to do this and I think I need to be able to extract each of them and assign them to a variable to use in an array???
I'm using Lotus Notes 6.5 and Excel 2003.
'Here is where I get the email address to put in the mailAddress variable
Workbooks("GSA Mileage Report.xls").Activate
mailAddress = ""
On Error Resume Next
mailAddress = Application.WorksheetFunction. _
VLookup(EmailAddrSheet.Cells(RowNum, 1).Value, _
Worksheets("MailInfo").Range("A1:B" & _
Worksheets("MailInfo").Rows.Count), 2, False)
On Error GoTo 0
View 10 Replies
View Related
Mar 27, 2014
I'm trying to email multiple worksheets from a list to multiple recipients in a list, but in one file per person. In a sheet called "Email list", for example, I have a list of 50 worksheet names (e.g. one for each cost centre) in column A (with a heading in cell A1, if that's OK, so the list starts in A2) and in columns B-F up to 5 recipients for each worksheet (e.g. 3 recipients might be 2 supervisors and their manager).
Also, each manager and supervisor might also receive several sheets.
Although columns B-F are presently free-format (they can be anyone's email address, regardless of whether they're a supervisor or manager), it might be easier to split these columns so B,C,D are supervisors emails and E,F are managers, if that makes it any easier creating the collated file of worksheets..?
Unfortunately the recipients might change occasionally so they can not be hard keyed into the macro itself (which would be much easier), but need to be in a table so it's easier for the user to update and maintain - in the past, I've managed to hard key the requirement into a macro which I've maintained (by recording and editing the macro), but I don't know the VB to figure this new request.
Ideally, I am trying to create a macro that can collate the various worksheets each person will receive and send the selected sheets in one file to that recipient, rather than multiple files within one email and/or multiple emails.
View 8 Replies
View Related
Feb 26, 2013
Imagine this..
In Column A I have 500 email addresses.
In Column B I have 2000 email addresses.
Now in Column C, I want to have all the email addresses in Column B MINUS all the email addresses in Column A.
IE: So basically if Column B had 300 of the same email addresses in Column A, then Column C will have 1,700 email addresses (2,000 - 3000) = 1,7000.
View 1 Replies
View Related
Nov 10, 2011
I have a Macro in Excel 2010 which emails each tab to a distribution list.
However Outlook asks for permission each time to send the email, is there a way to disable this ?, or get Outlook to grant permission for a set amount of time ?
View 2 Replies
View Related
Jan 24, 2014
I have got a list of email with identification number + email address. The PowerPoint are named by the identification number.
Can I send out the PowerPoint to the corresponding email address using VBA automatically? Or is there any other way to do it?
View 4 Replies
View Related
May 30, 2014
I need a code to convert different excel files into pdf and send to different recipients.
View 3 Replies
View Related
Jun 12, 2014
I have this code below to send a workbook as an attachment to different recipients.
The macro finds the recipents by going through a list. The problem I am having is when it moves through the second loop and enters the line which is starred in the coding below.
Run-time error '-2147221238(8004010a)':
The Item has been moved or deleted.
Sub Mail_Workbook_1()
Dim OutApp As Object
Dim OutMail As Object
Set OutApp = CreateObject("Outlook.Application")
Set OutMail = OutApp.CreateItem(0)
On Error Resume Next
[code].....
View 2 Replies
View Related
Nov 21, 2011
My excel sheet keeps a list of Email addresses on column B (with duplicate email addresses), and their particulars from column C (Item price, purchase date, etc) onwards.
I need the vba to email multiple recipients (those with the "notification" field marked as yes) with their purchasing details in it. It should also prevent multiple emails to the same email address.
PS.Using Excel/Outlook 2010
View 1 Replies
View Related
Jun 17, 2009
I would like to email an Excel file without the macros so the end recipients will only see the data and not be confused or excited about the prompt to enable/disable macros.
View 2 Replies
View Related
Sep 16, 2013
I am using Excel 2010. I have been given a task at work that can save my team a lot of time if I can solve the problem. Every month, we have a spreadsheet with about 5000 rows that we have to email. In each row, there is a range that we have to email to a specific email. For example, I would have to copy and paste Range A2-R2 in the body of the email, and then email it to whatever email is in cell S2. I would then continue this for the next 5000 lines, making it a possibility that i will be sending 5000 emails manually.
I have been trying to come up with a solution through VBA that would automatically send these emails. My goal is to automatically send the Range A2-R2 to outlook email, then cell S2 into the "To" email address box, and then automatically send it. So far, i have successfully been able to send one row, but cannot figure out how to loop it for the remainder of the rows.
A couple other key points are that I have column headings as well (Range A1-R1). If possible, I want to be able to include the column headings in the email body as well. Example - first email would be range A1-R2. second email would be range A1-R1 and A3-R3, and so forth. The body of the email would also contain a standard script, such as "Please review the information below."
The goal here is to save everyone from having to send 5000+ manual emails. This would be a big boost for my team.
Code:
Sub Email()
Dim rng As Range
Dim OutApp As Object
[Code].....
View 5 Replies
View Related
Jul 14, 2008
Is there a way to hide a macro from the list where you choose which to run, but not in the VBA editor? The userbox I just created calls upon 2 different macros, and has a macro to bring up the userbox. I need a way to hide the macros in Module3 from selection, but keep the macros in Module4 available to choose to run.
View 9 Replies
View Related
Apr 15, 2014
We know that professional emails have a fixed format. I have a list of people with their names and emails and there are some people for which emails are missing. I am pasting my sample data below. But first let me explain the meaning of columns.
Column A: Means full name of the person for which we have email id
Column B & C: just split of Available full name into first name and last name
Column D: Email id of the person with full name in column A
Column E: For the names in this column, we need to get email ids
Column H: Sample result
Now basis on the Full Name(Column A) and Email Id(Column D) can we get the email id for person in Column E.
Sheet4
A
B
C
D
E
F
G
H
1
Available Full Name
Available FirstName
Available LastName
Email for available full name
Actual Full name
Actual firstname
Actual lastname
Sample result
[Code] .........
View 2 Replies
View Related
Jan 9, 2014
I am working on an email marketing project and i have a small problem. I have two different email list. One (List A) is a large list of potential leads. The other (List B) is a list of leads we are not supposed to market to. I need to delete every lead on List A whose email address is also in List B, so that we do not send unwanted emails to our clients.
The best way i have to do this so far is to go through line by line, which is very impractical.
In case it matters here is out list format. Each list has 10,000 + leads. Each lead occupies a row. The row stretches across 13 columns and each column holds a different variable about the lead (names, state, email address).
View 2 Replies
View Related
Jun 19, 2009
I have an excel file I pulled from a database. Im going to use these emails for marketing. Is there so type of code or way that I can filter out the emails that are not complete or missing information? Im using excel 07
View 9 Replies
View Related
