Serach One Column And Enter Text In A Differnt Colunm If Criteria Is Met.
Nov 19, 2008
In worksheet "Details" search down column "A" looking for any text/numbers. If there is something entered in the cell then look at column "M" for the same row and if that cell is empty inset "0%" in the cell.
Example:
Cell "A1" contains 12345. Cell "M1" is blank. The macro would inset 0% in "M1".
Cell "A2" contains 54321. Cell "M2" contain 40%. The Macro does not modify that row.
Cell "A3" is blank. The macro does not modify that row.
Cell "A4" contain 65478. Cell "M4" is blank. The macro would inset 0% in "M4".
View 9 Replies
ADVERTISEMENT
Mar 13, 2007
Im trying to write a marco that will look in colum E and find criteria "a", then offset (2,1) and copy the activecell and the one below it to a1:a2, then return to where it was and offset (0,1) and then copy the active cell and the one below it to a4:a5.
after this is accomplished i need it to return to column E and start the process again for "critera b" paste the result to a7:a8 and a10:a11
I know folks usally post examples of the there code for other to take a peek at however I only know bits and pieces of the process and im not sure how to tie it all together...I was hoping someone could help me get a good start....thanks
View 9 Replies
View Related
Jan 9, 2007
In Sheet1, I have 1000 columns with data from A1:A100 to ALL1:All100. I want to copy each indivdual column and paste into one colunm in Sheet2.
View 10 Replies
View Related
Nov 8, 2009
I've got two columns with data. The first is text, and the second is numbers. So I want to be able to enter a certain criteria that would be contained in the text, and have excel return a list of the rows of text that contain that criteria and that have the highest 3 values in the corresponding column. I can use multiple cells to do this if need be (i.e. one cell for the text with the highest value, one for the second highest value, and a third for the next highest value).
View 4 Replies
View Related
Sep 23, 2008
I have the following code that fills a range of cells (starting at the active cell) with the date a user selects from a calendar control.
Private Sub Calendar1_Click()
ActiveCell.Value = Calendar1.Value
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)
Selection.Copy Destination:=Sheets("Audit_Results_Data_Collection").Cells(Rows.Count, "A").End(xlUp).Offset(1, 0)....................
View 9 Replies
View Related
Feb 21, 2010
My data is in colunm set #1. I want to create from the data set in column set 1 the data set shown in colunm set #2. I want to automate the process. The program needs to regognize if a name appears only once or more than once. If it appears more than once the data needs to be merged as I highlighted from yellow to green.
View 4 Replies
View Related
Dec 28, 2008
I want to create Name to include data in A101, C101, E101, G101, I101, K101, M101 and O101. How do I do it? I tried to hold ctrl, then click on each cell above, type name but it did not take.
View 9 Replies
View Related
Sep 24, 2009
My table is a much larger version of this:
A B
X1283.786
Y1684.379
Z1719.013
X10745.013
Y10860.668
i want excel to work out the total for x y and z. however i have about 100 different things x y and z could be and its a long list so an automatic way would be great.
View 3 Replies
View Related
Mar 13, 2009
I have an spreadsheet that has a colunm of numbers. I have three totals (values-no formula) that make up the total of that column. But i need to know which numbers make up each of those three totals. I was able to track one of the total but it was too time consuming. I know there are probably several different ways in wich this number can be add up. Is there a way to do this with a macro?
View 3 Replies
View Related
Dec 8, 2005
Col C = Text and Col F = dates
I would like to count the # of times a value occurs in Col C based on a date
range in Col F.
View 11 Replies
View Related
Apr 3, 2013
I have my students down the far left column (30 rows) and along the top for each worksheet is the criteria which they must be able to do. If my in row 2 completes the criteria text above in column 5 for example, then I input a 3 which then adds the points and works out their sub level scores. However I am now in need of it being able copy the criteria above if a student on any row has a T(for target) in that box. I would then like that criteria to be copied to a master sheet which displays their name down the side and all the targets they have for that subject in the next column, so that they can be referenced for their report summary worksheet.
View 14 Replies
View Related
Oct 27, 2008
The following code works like a dream for me, but if was to enter the wrong letter, not "N" or "R" and i tried to delete it, a debug message appears?
Is there a way to allow any letters to be deleted?
Here is my code
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Column = 17 Then
With Range("C" & Target.Row & ":R" & Target.Row).Interior
Select Case Target.Value
Case "R": .Color = RGB(184, 204, 228)
Case "N": .Color = RGB(120, 120, 120)
Case Else: .Color = RGB(255, 255, 255)
End Select
End With
With Target.Font
Select Case Target.Value
Case "R": .Color = RGB(184, 204, 228)
Case "N": .Color = RGB(120, 120, 120)
Case Else: .Color = RGB(0, 0, 0)
End Select
End With
End If
End Sub
View 9 Replies
View Related
Jul 24, 2008
Here's a sample of a completed table I would like to have.
Sheet2 *ABCDEFGHIJKL68*# ofSTART*wk #wk #wk #wk #wk #wk #wk #wk #69ACCTWEEKSWKRATE1234567870110181 $ * * * *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 71110242 $ * * * *10.00 * $ *10.00 $ *10.00 $ *10.00 $ *10.00 ***72120143 $ * * * *10.00 ** $ *10.00 $ *10.00 $ *10.00 $ *10.00 **73120272 $ * * * *10.00 * $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 74120381 $ * * * *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 75130151 $ * * * *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 $ *10.00 *** Excel tables to the web >> Excel Jeanie HTML 4
If given columns B and C, is there a VBA code that will look to those columns and auto-enter the payments across the week matrix based on that criteria?
View 19 Replies
View Related
Jan 2, 2013
This formula allows me to find the lowest value in column U where column N contains the text "NO".
{=MIN(IF($N$2:$N$10000="NO",$U$2:$U$10000))}
I want to add another condition so that the formula only returns the lowest value in column U where (i) column N contains the text "NO" and also (ii) column F contains the text "YES".
View 11 Replies
View Related
Dec 19, 2011
Is there any method to speed up a for each loop to count text in a cell with multiple criterias in a single column. This is on example:
Code:
For each rr in r
If rr = "a" And rr.Font.Strikethrough = False Or rr = "B" _
And rr.Font.Strikethrough = False Then
a = a + 1
end if
next
View 1 Replies
View Related
May 23, 2008
need a formula to calculate the total number of x's in one column (column B, C, E are training types= x) where the corresponding column date falls within a date range. It’s to total each type of training done for each month. I have 3 training type columns and a cell that calculates the total number of trainings for the each month:=COUNTIF(F2:F100,">="&DATE(2008,2,1))-COUNTIF(F3:F200,">="&DATE(2008,2,31)).
So now I just need it broken down by training type per month. How many x's in each column for February as an example.
View 7 Replies
View Related
Dec 9, 2009
The macro recorder doesn't let me record a macro that finds text box #9, go to the end of the existing text in the text box and then add my text.
When I record the macro and go to the box, it doesn't appear in the code (as well as not working).
View 9 Replies
View Related
May 8, 2009
how to make a certain type of date automate. It's kind of hard to explain, but basically, I'd like to make it so that when I enter a date in one column, another column will automatically populate with the 1st of the next month. For example:
If I enter 4/26/2009 in the 1st column, column 2 will read: 5/1/2009
If I enter 1/19/2008 .................................................. 2/1/2008
Also, it's very important that if the FIRST date is already the first of the month, then the second column will read the same. For instance: If I enter 3/1/2009 in the first colum, the second column will ALSO read 3/1/2009.
View 3 Replies
View Related
Dec 20, 2012
I am looking for a way of creating the following conditioned concatenation.
I have two tables, let's call them "summary" and "detailed".
The "detailed" table is something like the following:
ID
VOL
001
01
001
05
[code]....
The "summary" table below gets info from the "detailed" table. The 'ID'is now unique. I'm looking for a formula on the 'VOL (concatenated)' column cells it should get all rows from the "detailed" table with the same ID and then concatenate the 'VOL' column results, comma separated:
ID (unique)
VOL (concatenated)
001
V01, V03, V05
002
V01, V04
003
V06
PS: I have people using this table with office 2003, so compatibility is necessary...
View 1 Replies
View Related
Jan 20, 2009
I want to enter any thing in column (A) and then the date & time automaticaly put in column (B)
enter any thing in (A1), the date & time entered in (B1) automaticaly
enter any thing in (A2), the date & time entered in (B2) automaticaly
and so on ...
View 7 Replies
View Related
Nov 22, 2008
i attach the testing2.xls attachment here. from the sheet 1 "original", how to copy from 1 column, column"B" and then paste to column "A" by clicking function "alt + enter" at the same row but different row in the same cell. Output result can refer to the sheet 2 "output".
View 4 Replies
View Related
Jul 30, 2009
I would like a macro that does this
1. Find the "Customer Number" column by name
2. Find the range of the "Customer Number" column (bottom-most cell with data)
3. Find the column named "Date Shipped"
4. If there are any NON-Blank cells in the column named "Date Shipped", put the word "Sent" in the "Status" column (also needs to be found by name). This macro should stop when it is equal to the bottom-most cell in the "Customer Number" column.
View 9 Replies
View Related
Nov 28, 2008
I have manually set all row heights to 12.75 to make sure they are the same. In these rows I have a comments box and when the end of the cell is reached I use alt&enter to continue writing underneath. Seems the comments cell has stopped re-sizing.
View 2 Replies
View Related
Sep 29, 2009
how can i define in code, that my code will start after pressing "enter"?
i have textbox, i write something and i have a code. I want only launch my code after pressing enter.
View 5 Replies
View Related
Aug 2, 2014
When I click on a cell to enter text, a new little text window pops up inside the cell and doesn't allow me to enter text. No matter where I click in the cell another little text window appears. I also can't delete the text in the cell because the little text window pops up again and again.
Here's a pic of it: [URL]....
View 9 Replies
View Related
May 17, 2014
I'm trying to add an enter space to text with the combination of a loop and an array, but I cannot find the right combination so that the final result appears as so:
ArrayItem
Desired Text
or via excel
=NamedRange&"
Desired Text"
Here is the code for the loop, trying to add the appendage to the first item after the if.
[Code] .....
View 1 Replies
View Related
Oct 9, 2009
Not sure why this won't work. Just want to insert the text line "11 color" in column "I" if a user enters a number higher than 199 in column "G".
View 3 Replies
View Related
Jul 12, 2014
How can I enter a number of space in the text file and yhis number is existing in other cell.
Example:
=CONCATENATE(G4," ",I4," ",J4," ",K4," ",L4," ")
the number of spaces is given in other cells.
First space is F1 = 4
Second space is F2 = 8
and so on
View 3 Replies
View Related
Aug 14, 2007
I have text that when you push enter it goes to the next line and when you push tab it goes 5 spaces to the right the problem is...
When i have a lot of data it goes out of range and not all of the text is shown. I want to limit what is written to the size of the text box no matter the size or type the font is you can only type where you can see inside the textbox.
View 8 Replies
View Related
Sep 23, 2006
I need to create a form that if you were to enter a name in the text box it would fill all the information across that row into other boxes on the form. Basicly if I type John Doe in the text box it would look in col A for John Doe and then put whats in the cells on that row into different boxes on my form. I have tried searching but I have had no luck.
View 5 Replies
View Related
