Setting Condition Before Running VLookup VBA?

Feb 16, 2014

I created a Vlookup but first want a condition to be met to determine what Vlookup to use.

Such as

If cell = 1 then
run Vlookup #1

If cell = 2 then
run Vlookup #2

There are only 4 possible variables that the cell could equal. This would have to be on a loop, because the entries in the worksheet are multiple. It would first see what the specific cell equaled, then determine what Vlookup to use.

View 1 Replies


ADVERTISEMENT

Setting Up VLookup Using Two Cell

Dec 27, 2011

I need setting up a vlookup with using two cell

One cell will have a 1,2,3,4,5,exc.....

Yhe other cell will have a name

View 3 Replies View Related

Running Or Bypassing Code In A Macro Based On A Certain Condition...

Feb 17, 2010

I want to be able to run a certain chunk of code in the macro if a certain condition is true, or if that condition is not true then I want to bypass that chunk of code. It doesn't matter if this is accomplished with an if... then... else statement, or some other way.

View 6 Replies View Related

Setting Up A Vlookup Table For Sales Commission

Mar 12, 2014

I'm trying to set up a Vlookup table for commission rates but all my answers are 0. What I'm trying to do is set up Vlookup to return total sales less than 700,000 have 0% commission, 700,000 to 749999 10%, 750,000-799,999 11%, etc. . The commission rate increases by 1% for each additional 50,000 in sales, with the highest commission rate 20%.

View 6 Replies View Related

VLOOKUP With A Condition?

Dec 19, 2013

potential VLOOKUP (or possibly another function)

I have a table with about 14 columns, and need a VLOOKUP based on column A.

The problem is Column A has 2 of each unique ID - but column B is the subtype.

For example

Column A Has names (Bob, Jim, Steve, etc) Column B has Opt in or is blank (if they opt out the cell is blank if they opt in the cell says Opt in)

So essentially it's like a vlookup - as i need to read across the columns based on the name, but i also need to check column B if they have opted in.

View 1 Replies View Related

Vlookup With Condition

Jan 28, 2014

See attached the excel for reference : Vlookup with condition.xlsx‎

I have table A1:E10 , where i enter Internal team transfers "From Team" to " To Team" with Month

Now what i want in Table G1:S15 is that whenever a transfer takes place, for that particular month, tables gets filled up as +1 for "To Team" and -1 for "From Team." Also if there are multiple transfers happening for a particular team in a month then that numbers should sum up.

For your easy understanding, i have filled the table as per my logic explained above.

View 7 Replies View Related

Vlookup Rows With Condition?

Apr 10, 2014

I have an excel file with thousands of rows and I'm trying to pull certain data from one tab to another. In the example, I want to pull all Listings that are "Open" (I know, just filter), but if the listing is "Open" I want to pull all of the other statuses it once had as well in the new tab. Notice how a listing can have multiple statuses.

I was thinking I could filter by Status (Open) and then do a vlookup (using the listing number as the lookup number), but it doesn't work.

View 4 Replies View Related

Multiple Condition Vlookup

Jan 9, 2009

I've been trying to figure out how to do a vlookup using two conditions. Reading some other posts, I saw this could be done by combining a MATCH function but I'm still having trouble. Here is what I'm trying to do: I am trying to match cash amounts based on two look up values....one being the identifier (cusip) and one being the pmt code. http://i105.photobucket.com/albums/m204/RAK_08/data.jpg

This data is formatted exactly the same but comes from two different sources. I need to match the pmt amounts for a cash reconciliation.

View 4 Replies View Related

Vlookup Based On 2 Condition

Jan 28, 2009

i looking for function, which will give me a results if its the person good , bad and other (Y). It will look based on column A, but if will be more equal names in this column, it looks in the column surname (B) and return value from column (Y) in this row. But it can be more equal column B.

Here is an example:
Results what i want are in Z1,Z2,Z3

X Y Z
1 sue doe good
2 joe bond very good
3 mark no bad

SOURCE table
A B C
1 john doe good
2 joe black bad
3 sue doe good
4 mark black not bad
5 joe bond very good
6 mark no bad
7 kat doe bad

View 4 Replies View Related

How To Use VLookup Return Only Some Condition Satisfies

Apr 26, 2014

I have an excel sheet with lot of data.i want to use vlookup function for getting what cell i want. the same time it will also check if and only if two cells are matching then return the result.is it possible. for example:

101 3.2 7.3 200 500
102 5.2 8.3 200 450
103 3.2 7.3 200 750
101 7.3 7.3 200 450
102 7.3 7.3 200 500

103 7.3 7.3 200 600

if my lookup_value is 103(ie A3 ) in this table array and required column is 6th column(ie E6).

return the value if and only if B & C cells of the corresponding row matches. In the example B6=C6 then return the E6=600.

if i am using without this condition it returns the same row values ie E3=750 required is E6=600

View 12 Replies View Related

VLOOKUP, IF Condition And Pivot Table

Feb 22, 2009

Have following table:
No. Be Country
1 D GB
1 C DE
2 B DE
2 A GB

I want to present it as follow:
GB DE
1 D C
2 A B

Did not solve it with a pivot table. Not either with VLOOKUP combined with IF. I am thinking in the direction: If 1 in the first column and GB in the third, return the D. But I am not getting it right.

View 2 Replies View Related

Adding A Condition To An IF And Vlookup Forumula

Aug 28, 2009

Title: How do I add a condition to an IF and Vlookup Formula:

I need to edit a formula to include a condition. I attached an excel file for ease of explaining the problem. I want to say if $E$5 has “A to B” then F5 will automatically have BOR, but if E5 has anything else then the Vlookup formula applies.

I was thinking something along this formula:
=IF(AND($E$5<>”A to B”,ISBLANK($B5),"",VLOOKUP($B5,'Drop Down'!$D$1:$E$500,2,FALSE)))

I know I need to add “BOR” in the formula above somewhere
Where am I going wrong?

View 2 Replies View Related

Vlookup Using 2 Condition One Based On Devices And Grouping Column?

May 27, 2014

Attach below are 2 sample file and inside it consist of device,grouping and lb1,tb1,ab1. How do I use excel formulae based on 2 condition and set from vlookup with 2 condition file to vlookup with 2 condition 1 file like a vlookup.

View 11 Replies View Related

VLOOKUP Multiple Values Then Give Answer Based On Condition?

Feb 6, 2014

I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.

The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.

Zero - 0 should be excluded from the formula as it is part of planned values and not actual.

View 5 Replies View Related

Cell Equals 0 Changes When Condition Met - Leave Unchanged When Condition False

Mar 24, 2014

I am trying to perform a calculation in a cell that leaves the value 0 if before Feb 2014, changes to the value of another cell in Feb 2014 and leaves the value unchanged if after Feb 2014. I can get to the Feb 2014 value but after that month the value changes to 0.

The Cell formula that I am trying to use is as follows:

=IF(YEAR($A$3)<2014,"0",(IF(YEAR($A$3)>2014,H114,(IF(MONTH($A$3)<>2,H114,AA118)))))

A3 contains TODAY()

H114 is the cell being calculated

AA118 is the cell containing the calculated value for the current month.

View 2 Replies View Related

Multi Condition Format? Lookup And Date Condition Valid For

Aug 13, 2009

I would like to try and achive a conditional format that will require a lookup function. when the condition is met it places Yes or No into a cell and changes that row colour to red for the NO condition. and after 10 days from now the rowcolour is removed.

View 6 Replies View Related

Conditional Formatting :: Condition 1 Override Condition 2?

Feb 29, 2008

I'm having trouble with the two formulas working in conjuction with each other.

Condition 1:
=(MOD(ROW(),2)=0)*(COUNTA(3:3))

Condition 2:
=TODAY()>=A1

"Condition 1" seems to override "Condition 2"? Ever see that?

View 9 Replies View Related

How To Count Condition Based On Having Another Condition

Apr 12, 2014

So I have one sheet that needs to pull data through to another sheet (which is a stats summary)

I have a drop down list containing 4 options all of which have to be counted separately on the stats summary sheet. However I only need them counted when a value is input in another cell in that row.

For example: I select option 1 from down down menu, but I only want this to be counted on the stats page when I enter a date in the "date" cell.

View 9 Replies View Related

Return Values Of Adjacent Cells When Condition Is True Omitting Values Where Condition Is False?

Jan 15, 2014

Here's a simplified example:

ColA
ColB
ColC

Row1
A
Y
A

Row2
B
N
D

[Code] .........

I'm looking to return the values in column A adjacent to the cells in Column B equal to "Y". The kicker has been returning only the cells where the condition is true. Column C displays the desired behavior.

The closest I've been able to get is with a simple IF statement but I'm pretty sure the answer is a far cry away from there and likely requires an array formula. I'd prefer not to use VLOOKUP or OFFSET but will if the alternative is very complex.

View 7 Replies View Related

Subtract Days Between Due Date And Today Date If Condition 1 And Condition 2 Are True?

Feb 2, 2014

I need cell (O4) to display days overdue or days remaining on an assigned task based on subtracting due date (M4) from todays date, but only perform days subtraction function if (M4) is not blank and only if task complete cell (N4) is less than 100.

Have the conditional blank cell figured out, but nesting another condition for the less than 100 complete cell. So in other words, I don't want cell (O4) to subtract days and display any error, irrelevant data if there is not any due date entered or the task is entered as complete...

View 3 Replies View Related

Setting The Conditions?

Mar 13, 2009

What formula could I use to return the following results.

1, 2, 3,4, 5, 6 = Manhattan
7 through 12 = Bronx
31 = Staten Island

View 2 Replies View Related

Setting Up Input Box

Jun 21, 2009

What I want to be able to do is set up a thing that when you're in the excel sheet you click on it. Up comes a box where you can enter data and when you click submit. It puts that data back into excel spreadsheet. I have attached a spreadsheet to show what I mean. I have deleted some stuff that are unnecessary so don't worry about them.

What I need is for you to click a button that will create a new row/copy into the next row, from A9-AH9. Then the button will automatically bring up a box that will ask for Time, Timber, Clay, Iron, Warehouse, Hiding Place and then will enter that data into there respective cells which would be D20, F20, I20, L20, O20, Q20 respectively. That is the main idea. maybe it would be better to have te button come up with a box asking for the information and then will create the row and insert the data. If it's easier you can just do the box with just time or something so it's easier. I can then do the rest.

Tyvm. This to me seems really complicated so not sure how you would do this at all. i've looked at other stuff on the internet but haven't gotten anywhere.

P.S. If you have a more generic thing similar to this then show me the code for that or upload it and I can change it too suite my needs.

View 14 Replies View Related

Setting AutoFilter Via VBA

Jan 20, 2010

This macro was working just fine, now it generates an error on the line in red.

View 2 Replies View Related

Setting Up A Log Equation

Oct 9, 2009

It looks like this (log(X/Y))/log2. The X and Y are celldirections (E2 or F4 and so on). How do i setup that formula in excell?

View 2 Replies View Related

Setting Conditions

Jan 1, 2009

I have the word "Gross" in a cell at the end of each month on one sheet. I need to calculate totals for each month above this columns so lets show it as this:
A B
1 100
2 150
3 220
4 300

Gross 770

How can I set up a macro to always calculate what my gross is setting a condition to find "Gross" and then somehow select the cells above it up to A1? I will have another cell as "Gross" for February under the rows of information for January. I am not at all sure if this can be done.

View 9 Replies View Related

Setting Up A New Database

Oct 13, 2009

I am trying to set up a database to collect information on students behavior. We need to collect the frequency of 3 things-time of day, behavior, and correction. Can I do this in Excel? How? Is there a way to write a correlation that will count the occurrence of words?

View 9 Replies View Related

Setting Range

Mar 15, 2007

How do you set the range with whats below? Right now its looking at 4,2 only and if extend to look all the way to 19,2 it will just copy the whole screen. I need it to look at 4,2 and then move to 5,2 and then so on once it has copied all that information to the sheet ...

View 7 Replies View Related

Setting Up Mailing Labels

Dec 8, 2009

I just received a massive worksheet full of information for mailing labels. It's all in columns-which is excel. Is there an easy way to set this up for mailing labels? I've tried to import it into word, but I'm not getting anywhere. Is it possible to change the way excel displays the cells? To a point where I can have the address beneath, then the state, zip, etc?

View 9 Replies View Related

Setting Up Menu In Workbook?

Dec 13, 2012

I have an excel workbook with multiple worksheets(tabbed across the bottom of the workbook). How can I set up a menu of the worksheets on the left hand side of the workbook that enables me to jump to that worksheet?

View 4 Replies View Related

Setting Text To Date?

Sep 16, 2013

I have a problem with an file that I have exported from another software program (I believe in CSV). The file seems to be in tekst format but I can not change it to date format. I need to know which weekday is which date. So january 1st is a tuesday and so on..

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved