Vlookup Rows With Condition?
Apr 10, 2014
I have an excel file with thousands of rows and I'm trying to pull certain data from one tab to another. In the example, I want to pull all Listings that are "Open" (I know, just filter), but if the listing is "Open" I want to pull all of the other statuses it once had as well in the new tab. Notice how a listing can have multiple statuses.
I was thinking I could filter by Status (Open) and then do a vlookup (using the listing number as the lookup number), but it doesn't work.
View 4 Replies
ADVERTISEMENT
Dec 19, 2013
potential VLOOKUP (or possibly another function)
I have a table with about 14 columns, and need a VLOOKUP based on column A.
The problem is Column A has 2 of each unique ID - but column B is the subtype.
For example
Column A Has names (Bob, Jim, Steve, etc) Column B has Opt in or is blank (if they opt out the cell is blank if they opt in the cell says Opt in)
So essentially it's like a vlookup - as i need to read across the columns based on the name, but i also need to check column B if they have opted in.
View 1 Replies
View Related
Jan 28, 2014
See attached the excel for reference : Vlookup with condition.xlsx‎
I have table A1:E10 , where i enter Internal team transfers "From Team" to " To Team" with Month
Now what i want in Table G1:S15 is that whenever a transfer takes place, for that particular month, tables gets filled up as +1 for "To Team" and -1 for "From Team." Also if there are multiple transfers happening for a particular team in a month then that numbers should sum up.
For your easy understanding, i have filled the table as per my logic explained above.
View 7 Replies
View Related
Jan 9, 2009
I've been trying to figure out how to do a vlookup using two conditions. Reading some other posts, I saw this could be done by combining a MATCH function but I'm still having trouble. Here is what I'm trying to do: I am trying to match cash amounts based on two look up values....one being the identifier (cusip) and one being the pmt code. http://i105.photobucket.com/albums/m204/RAK_08/data.jpg
This data is formatted exactly the same but comes from two different sources. I need to match the pmt amounts for a cash reconciliation.
View 4 Replies
View Related
Jan 28, 2009
i looking for function, which will give me a results if its the person good , bad and other (Y). It will look based on column A, but if will be more equal names in this column, it looks in the column surname (B) and return value from column (Y) in this row. But it can be more equal column B.
Here is an example:
Results what i want are in Z1,Z2,Z3
X Y Z
1 sue doe good
2 joe bond very good
3 mark no bad
SOURCE table
A B C
1 john doe good
2 joe black bad
3 sue doe good
4 mark black not bad
5 joe bond very good
6 mark no bad
7 kat doe bad
View 4 Replies
View Related
Apr 26, 2014
I have an excel sheet with lot of data.i want to use vlookup function for getting what cell i want. the same time it will also check if and only if two cells are matching then return the result.is it possible. for example:
101 3.2 7.3 200 500
102 5.2 8.3 200 450
103 3.2 7.3 200 750
101 7.3 7.3 200 450
102 7.3 7.3 200 500
103 7.3 7.3 200 600
if my lookup_value is 103(ie A3 ) in this table array and required column is 6th column(ie E6).
return the value if and only if B & C cells of the corresponding row matches. In the example B6=C6 then return the E6=600.
if i am using without this condition it returns the same row values ie E3=750 required is E6=600
View 12 Replies
View Related
Feb 22, 2009
Have following table:
No. Be Country
1 D GB
1 C DE
2 B DE
2 A GB
I want to present it as follow:
GB DE
1 D C
2 A B
Did not solve it with a pivot table. Not either with VLOOKUP combined with IF. I am thinking in the direction: If 1 in the first column and GB in the third, return the D. But I am not getting it right.
View 2 Replies
View Related
Aug 28, 2009
Title: How do I add a condition to an IF and Vlookup Formula:
I need to edit a formula to include a condition. I attached an excel file for ease of explaining the problem. I want to say if $E$5 has “A to B” then F5 will automatically have BOR, but if E5 has anything else then the Vlookup formula applies.
I was thinking something along this formula:
=IF(AND($E$5<>”A to B”,ISBLANK($B5),"",VLOOKUP($B5,'Drop Down'!$D$1:$E$500,2,FALSE)))
I know I need to add “BOR” in the formula above somewhere
Where am I going wrong?
View 2 Replies
View Related
Feb 16, 2014
I created a Vlookup but first want a condition to be met to determine what Vlookup to use.
Such as
If cell = 1 then
run Vlookup #1
If cell = 2 then
run Vlookup #2
There are only 4 possible variables that the cell could equal. This would have to be on a loop, because the entries in the worksheet are multiple. It would first see what the specific cell equaled, then determine what Vlookup to use.
View 1 Replies
View Related
Jun 21, 2008
I have an imported report in a spreadsheet. It imports to three columns. I need to check each row in column A for three seperate criteria and delete the rows I don't need. I need to delete blank rows and check next row for page header info. Delete these and next rows to next blank cell. Check next row for page header and not delete if not page header. Several rows down will be a cell with 23 blank spaces before the word Reg: and sometimes other words past this but always this first. This row is to be kept. I looked at the FAQ's example of Deleting but I don't think it will work. I also need to put a key word in column A at a point where I want to stop. This report is a couple thousand rows long so a VBA procedure would really save time. I have a procedure I use to check for two zero's in two cells that hide these rows but I couldn't modify it to work on this report.
View 9 Replies
View Related
May 27, 2014
Attach below are 2 sample file and inside it consist of device,grouping and lb1,tb1,ab1. How do I use excel formulae based on 2 condition and set from vlookup with 2 condition file to vlookup with 2 condition 1 file like a vlookup.
View 11 Replies
View Related
Feb 6, 2014
I have been struggling with this formula for ages and have finally given up. What I would like to do is to do a lookup on the concatenated values of Province, Department and Initiative No, which has mutiple values in the status of milestone column, and then give the answer based on a condition.
The condition for this example should be, that if the returned status / or statuses of the initiative is all 1, then the value should be 1, if it's all 2, then the value should be 2, and so on.....but if the values returned from the status of the initiative is a combination of 1,2 or 3, then it should give me the answer 2. If 4 is part of the comination of values returned, then the value should be 4.
Zero - 0 should be excluded from the formula as it is part of planned values and not actual.
View 5 Replies
View Related
Sep 25, 2012
I would like an easy/fast way cut an entire row of data from one worksheet ("Open Work") to another ("Closed Work"). Each worksheet has a matching Header Row from column A - N. In "Open Work" I have column "K" with various values, but I'm looking specifically for the "CLOSED" value. If a cell in column "K" = CLOSED, I want to cut the entire row and paste it into the other worksheet "Closed Work".
That was a no-go! It copied limited rows AND duplicated them.
VB:
Sub copyrows()
Dim tfCol As Range, Cell As Object
Set tfCol = Range("A2:A9") 'Substitute with the range which includes your True/False values
For Each Cell In tfCol
[Code] ......
View 6 Replies
View Related
Oct 6, 2008
I'm working this spreadsheet and i want to automate of deleting the entire rows once the last two columns contains both Zero values. the worksheet cotains thousands of row to clean-up.
View 3 Replies
View Related
Dec 15, 2009
I want a macro to delete the entire row based on the value in Column Q ....
View 14 Replies
View Related
Jan 18, 2012
I have data in the format below. I'm looking for a piece of code that will look down column B and if there are 30 rows in which all the values are zero then delete all rows from row 1 to the last row of those 30 rows.
Input_data  AB106/01/2012 13:03:170206/01/2012 13:03:1816306/01/2012 13:03:1916406/01/2012 13:03:2016506/01/2012 13:03:2117606/01/2012 13:03:2224706/01/2012 13:03:2316806/01/2012 13:03:240906/01/2012 13:03:259.51006/01/2012 13:03:26191106/01/2012 13:03:27211206/01/2012 13:03:28161306/01/2012 13:03:2981406/01/2012 13:03:3001506/01/2012 13:03:31571606/01/2012 13:03:32801706/01/2012 13:03:331091806/01/2012 13:03:341331906/01/2012 13:03:35156
View 1 Replies
View Related
Apr 21, 2014
I want to get some blank rows in a worksheet after certain characters.i have some data in a sheet. at the end of each cluster of data it ends either with 1-0 or 0-1.
if excel finds 1-0 or 0-1 at the end of a bunch of rows, it should add 5 blank rows under it.then it should search for the next 1-0 or 0-1
If data ends on A25 where you find 1-0 or 0-1 then add 5 blank rows under it from A26:A30,likewise it should be given till it reaches the end of the range.range can be defined as A1:A1000
View 4 Replies
View Related
Nov 2, 2007
I need macro to perform the following steps. I have also enclosed the image of the file for reference.
1)I need to move or copy the data in sheet one to sheet two.
2) In sheet two I need to select customer BBBB and delete all the rows beginning with PO# of 17, 18, 46 or GL4.
3) finally I want to delete all the rows in the sheet which are not equal to class Invoice. (Presently I do this using custom filter as "doesnot equal" = Invoice") ..
View 11 Replies
View Related
Mar 21, 2007
Currently i have this to delete entire rows that have cells which contain any words with "Security Market" in it.
How can i extend this to include many more variables like e.g. " Total" "ABC" "XXXX"
Dim rag As Range 'Rows with "Security Market"
Dim sec As String
sec = "Security Market"
Do
Set rag = ActiveSheet.UsedRange. Find(sec)
If rag Is Nothing Then
Exit Do
Else
Rows(rag.Row).Delete
End If
Loop
View 5 Replies
View Related
Feb 16, 2014
how can I write a routine to add rows in one Sheet if a condition which involves a different Sheet is met (excel 2007).
In Sheet 1 is a list of ("liquid") names (cells C4:C26) which will need to be expanded should the IF condition be satisfied. In row 27 I have a subtotal (whihc is using data from columns D onwards), and from row 29 down cells are not empty.
The condition I want to verify is in Sheet 4-column I, where it is reported whether a name is classified as "liquid" or "illiquid". If the number of "liquid" names in sheet4-column I is more than the number of names in Sheet1-C4:C26 I would like to add as many rows as the difference between the two lists. Also I would like to make sure that the subtotals that I have in row 27 (and that will be shifted down when new rows are added) will also inlcude the data in the new rows (the subtotal is taking data from columns D onwards).
Should the code need to inlcude the name of the tabs, Sheet 1 is called Summary and Sheet 4 CDS Data.
View 1 Replies
View Related
Feb 6, 2009
I've got a workbook (attached) with a "summary" sheet & 2 detail sheets for tracking vacation time used, and I need to make it automatically clear out an employee's "used" vacation hours automatically on their anniversary date.
Can anybody help me please? I've had no luck thus far & "the powers that be" are really getting on me for this now -
View 14 Replies
View Related
May 28, 2009
What I need is a macro to delete a row or rows for a specific range of cells (eg. E20 to E58) when the cells in that range column E is = blank. The cells in column E is formated with a currency sign $. Deleting the row should shift up all rows below. I need to run this macro manually. Excel 2002 SP3.
View 9 Replies
View Related
Jul 20, 2009
Is it posibile to make a macro that automaticaly delete rows based ona a condition. Condition is to delete rows that have B column value "" or zero. For example:....
View 12 Replies
View Related
Aug 8, 2012
I have a data dump. I download everyday with 200 rows and 20 columns. I need to remove any rows where there is no value in either columns C or D. Is there a quick way to do this?
View 7 Replies
View Related
Nov 5, 2012
How to create a macro that would highlight a row that has the following condition :
name
ref num
sam
123456
sam
123456
alice
342333
In this table, i need a macro that would highlight the row that has alice data due to it been having 1 ref number count under the ref num column. The macro should loop and end with msg " there are 'x' records having 1 ref number count"
View 1 Replies
View Related
Feb 11, 2013
I have a cell with today's date on it. i.e., cell A1 = today()
Then, I have rows of data with one of the columns with a date on it. I've put in an object (button), where when the user presses this button, I want all the rows of data that do not have the date on cell A1 to be hidden.
Then on the second button, when the user presses the button, to unhide all the rows that were previously hidden. To make it easier, I can simply state it to unhide all the previously hidden rows (but NOT columns - there are still hidden columns which I want it to stay hidden).
So in sum, using table below. If I have on cell A1 - today's date is 2 Mar 2013, pressing first button would hide the row with Jane Y's record. Then pressing second button would then unhide all previously hidden rows.
DATE
NAME
DEPT
1 Mar 2013
John X
Accounting
2 Mar 2013
Jane Y
Operations
3 Mar 2013
Joe Z
Marketing
How can I accomplish this?
View 6 Replies
View Related
Mar 12, 2002
I haven't mucked about with Excel in quite a while now and have been asked to do a module in Excel 2000.
When given a workbook (tej-exit.xls) which has one worksheet of thousands of rows with columns from A to AS, i would like to copy all rows which have a zero in column N to a new worksheet.
Is this difficult?
Would i have to have one workbook with the code module in, load up the tej-exit.xls file ?
View 9 Replies
View Related
Jan 6, 2009
I want to create a macro the will delete all the rows in a sheet if 1 of 2 conditions are met. The first condition is if a cell is blank or if a cell contains the word "negative"
View 9 Replies
View Related
Nov 1, 2006
how to delete duplicate rows except the first and the last rows using macro..
I have data like this and i want to delete those rows except the first and the last rows
31/10/2006
31/10/2006
31/10/2006
31/10/2006
I use the below macros from btadams posted 27th January 2003 but only for delete the last row
Sub DleteDups()
Dim Cell As Range
Do While ActiveCell.Offset(1, 0) <> ""
If ActiveCell.Value <> ActiveCell.Offset(1, 0).Value Then
ActiveCell.Offset(1, 0).Select
Else
ActiveCell.EntireRow.Delete
End If
Loop
End Sub
View 9 Replies
View Related
Jul 3, 2007
complete this coding?
Sub DeleteBlankRowInColumnA()
'this macro scrolls down Column A if the cell is empty the row is deleted.
Dim A As Integer
A = 0
Do Until A = 142
If Range(0, "a1") = 0 Then
Selection.Delete shift:=xlUp
End If
Loop
End Sub
View 9 Replies
View Related
