I've got a bizarre problem here. I've been working on a piece of code and one line has started behaving erratically: Sheets("BLANK SCORE").Copy after:=Worksheets(Worksheets.Count)
I want to do is create a copy of the sheet called "BLANK SCORE" and copy it after the last sheet in the workbook. This code is part of a loop that runs a maximum of 10 times (potentially creating 10 copies) and I've had inconsistant results such as:
*) Code works and copied sheet is created (desired result)
*) Code is ignored and no copied sheet is created (shouldn't do that)
*) Sheet is copied to a new blank Workbook (...huh ?)
I have a large data set (from columns A - I, with over 10,000 rows) of information located on Sheet1 that I need to be able to go through to find the criteria (which is text and is located in column B) I'm looking for. I know how to write the VBA code to use Excel's AutoFilter option .... what I don't know is how can I can identify and copy the results the AutoFilter pulls up, from Sheet1 into another sheet because the data is on a number of different rows.
For example, I have to search column B three separate times for the following criteria: 1. xyz 2. acb 3. hij
Today, I may find the "xyz" information on rows 6-150, 755-787, 1021, and 8524-8999, whereas tomorrow "xyz" may be on rows 51-101, 8547, and 9989-9991.
When saving excel workbooks in our shared drive, a second copy of the workbook (with an unusual name) is being saved in addition to the original copy. Why would this happen?
I wonder if someone has a clever solution for the following, I have a spreadsheet where I have done subtotal on some of the figures, does anyone know how I can copy (and paste into a new sheet)only the rows where I have a subtotal?
I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.
In the results I would like the header row if at all possible, but I can always just make it part of the macro.
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code: Sub CalculateDeviceFailureTimes() ' ' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System ' Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
I recorded a macro to perform an Advanced Filter. I then adapted the range to & LastRow. My question is, can this now be adapted to remove the Select so the sheets are not selected when this is run.
I have a workbook with 50+ sheets. Within each sheet are rows of data in column A that I'd like to search for specific text.
I'd like to search each row from every sheet for specific words (e.g. "7 days" AND "Monday" AND "Tuesday" etc.) then copy the entire row containing all my search text in a new sheet on column A along with the name of the sheet it was found in in column B and the row number it came from in column C.
What I am trying to accomplish is to search through all the sheets and post results in new sheets for each search string.
I have a report that is run weekly that shows items that have been returned over the last 3 months. The report shows the original date of purchase and the return date, but not the number of days since the purchase and the return. I need to have any items that were returned over 15 days go to a new sheet and display just those rows of information.
I have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10 Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1 2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults") 3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2 4. Repeat Step 2 . . . Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
I have been trying to edit a code which previously saved a copy in a new workbook to a specific folder/path. (Additionally it copies and clears some figures, but this is working as it should.)
However I would like the copy to be saved at the same location as the original workbook, regardless of the path the original workbook is saved.
I.e if I need to move the workbook containing the code to a new folder/location, when using the macro, the new copy should be stored in the same folder/location as the original one.
For now it is only saving the copy into "My Documents"
Code: Sub Macro1() ' ' Macro1 Macro ' Macro recorded 16-02-2009 by ceng '
I have a Picture in a workbook kept open. ( workbook 1 )And i have some X workbook open....i want a copy of sheet from workbook 1 To X workbook which is currently active.
I am wanting to create a macro for excel that when run it it will copy the active worksheet and worksheet named "Timesheet" and copy them to a new Excel workbook named the same as the original file + "JobBrief".
have a basic knowledge of VBA. The task I am trying to perform with VBA is to
1. Copy from sheet1 A1 to sheet2 E9 2. Copy from sheet1 B1 to sheet2 E11 3. Save sheet2 in a new workbook file with the file name cell data from sheet1 A1 (511894.xls) 4. Copy from sheet1 A2 to sheet2 E9 5. Copy from sheet1 B2 to sheet2 E11 6. Save sheet2 in a new workbook file with the file name cell data from sheet1 A2 (097219.xls) 7. Repeat the process down columns A and B to the end of the columns. 8. Columns A and B will end at the same time but the data and the last cell will change with each scan added to the columns.
This code will accomplish this task with a single column of data but not two columns. Also column B will have a mixture of numbers and letters in its cells, Column A is only numbers.
VB: Sub MoveData() sName = "temp" Const csPath As String = "C:Documents and SettingsmcgaulcDesktopTestFile" 'MyName = ActiveWorkbook.Name
[Code].....
Here are some images of the data sheet and the saved sheet
Sheet1.jpg Sheet2.jpg Note: sheet2 in image is "temp" sheet in code
I have an excel workbook that contains 12 sheets.(ECN.xls). I have another workbook that contains 1 worksheet.(ExcelRows.xls). I have written a macro to Copy a range of values from ExcelRows.xls(ExcelRows is the Sheetname) to ECN.xls(ECN Number is the Sheetname). The macro is written in ECN.xls.
I sit and struggle with a macro and I'm having trouble with a piece of code, that looks like this:
Set NewBook = Workbooks.Add Application.DisplayAlerts = False With NewBook .SaveAs Filename:="Kabelsynsrapport.xlsx" End With Application.DisplayAlerts = True ActiveCell.Offset(0, 100).Range("A1").Select Windows("forsynings ark.xlsm").Activate Sheets("Kabelsynsrapport").Select Sheets("Kabelsynsrapport").Copy Before:=Workbooks("Kabelsynsrapport.xlsx").Sheets(1)
My code fails at the last line, and when I try to perform the action manually, I get this error: The sheets can not be inserted in the destination workbook, because it contains fewer rows and columns than the source workbook. To move or copy the data to destinatinosprojektmappen, you can select them and then use the command Copy and Paste to paste them on sheets in another workbook.
What I'm trying to achive is that it opens up a certain target workbook and starting at sheet 4 will copy the contents and paste in the current workbooks sheets. when it comes down to the wbTarget see mark, I have a compile error saying I have an invalid qualifer. Also If there are more sheets in the target than in the current how do i make it create a new sheet to paste the data into?
Code:
Global dCol As Integer Global wbtarget As String Sub find()
I have a sheet with whole bunch of cells as defined names. I want to make a copy of this sheet and put it into another workbook. I was thinking that I need to un-define all the names and then make a copy. I dont know how to do this besides going manual on every name. There are more than 100 names that are defined and is not practical for me to do.
i would like to copy a sheet from a workbook to another workbook. I did some coding and it works almost well. The problem is that if the worksheet exist allready in the destination workbook I would like that the macro stop before copying it again. Every time I run my macros it always copy the sheet. I didnīt ound out how to stop the macro. I tried by wo different ways, none of them work
Sub Copy_Sheet_If_Not_Exist() Dim i As Integer Dim strSheetName As String Dim blnFound As Boolean Set ws = Workbooks("Projekt.xls") strSheetName = ActiveWorkbook. Name For i = 1 To Sheets.Count Step 1 If ws.Sheets(i).Name = strSheetName Then blnFound = True Exit For Next If blnFound = True Then Exit Sub If blnFound = False Then ActiveWorkbook.Sheets("overall").Select Sheets("Overall").Copy After:=Workbooks("Projekt.xls").Sheets(1) End Sub...................
For example i have workbook1,2&3, i want to copy the sheet(grade2&3) in workbook2&3 and paste to workbook1. But the data in workbook2&3 sheet(grade2&3) will automatically paste in workbook1 sheet(record grade 1 - grade 3) in column grade 2..
I'm trying to find the simplest way (macro I guess) to copy a row into a corresponding workbook. This is for a registration workbook.
This workbook has a demograhics sheet (the main sheet), which will have the persons name, dob, and a few other identifiers. It will also have a column for a registration person to enter the of the 4-5 workshops/classes that a student can be enrolled in. For the sake of argument these will be numeric, comma seperated values 1,2, 3 etc.
I'll then have many sheets (one for each class) that are named 1-Employee Morale, 2-Interoffice Relationships, etc.
Is there an easy way that upon entering a new row in the demographics sheet, the persons name can be copied to the class list? Esentially I'm trying to have one master list of all students and the classes they are signe dup for, and then a printable list for each class that can be given to the instructor.
I know you could probably do a macro, run it once, and do it after everyone is registered, but we would prefer that the data populate based on a trigger or something as each row is entered. The sheets for each class could be named numeric so if you entered 1,2,3 as the classes then the sheets 1,2,3 (names) would be populated.
