I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.
In the results I would like the header row if at all possible, but I can always just make it part of the macro.
I have 2 sheets. The first sheet contains rows of data that I wish to search (Query Results) through and find matching data. The second sheet is the source of the data I want to find (Notifications). I want to take the number located in column A on sheet 2 and then use it to auto filter the rows on sheet 1. With the range that is left visible on sheet 1 I want to select the first row (can offset(1,0) to remove the headers, and paste the selected row back in to Sheet 2 ontop of the row where I sourced the original number to filter by.
Once the item is pasted I then want to pick up the next number from Sheet2 to repeat the process until all numbers have been processed in Sheet2. I have been going round the block on this for the past few days!
Sheets("Query Results").Select
With ActiveSheet.AutoFilter.Range
On Error Resume Next
Selection.AutoFilter Field:=1, Criteria1:=vFroID
Selection.AutoFilter Field:=15, Criteria1:=vReqData
Set rng2 = .Offset(1, 0).Resize(.Rows.Count - 1, 1).SpecialCells(xlCellTypeVisible)
On Error Goto 0
End With
vDestRow = "A" & vLoopCount
If rng2 Is Nothing Then
MsgBox "No data to copy"
Else
Set rng = ActiveSheet.AutoFilter.Range
rng.Offset(1, 0).Resize(rng.Rows.Count - 1).Copy _
Destination:=Worksheets("Proposed Notifications").Range(vDestRow)
End If
vLoopCount = vLoopCount + 1
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code:
Sub CalculateDeviceFailureTimes()
'
' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System
'
Dim Output As Integer
[Code] .......
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
The error above comes up every time I copy filtered data to a new worksheet. It does its work but the said error comes up.
Sub AUTOFILTER_withouthead()
' AUTOFILTER_for_drop Macro
' Macro recorded 1/27/2008 by DD
Dim ws As Worksheet, wd As Variant
Set ws = Worksheets((Worksheets("Destination"). Cells(1, 6).Value))
Set wd = Worksheets("Destination").Range("A1:F65000") ...
I have created a macro some time ago that is an integrated part of an XLA. The Xla has worked fine but now, for some reason, the macro fails to import the specified text, it doesn't fail but nothing gets imported. I have tried solving this myself, but alas I am not bright enough
The code is:
Sub GetWorksheet()
Dim filetoopen As String
Dim wb As Workbook
filetoopen = Application _
. GetOpenFilename("XL Files (*.xls), *.xls")
On Error Resume Next
I got the following code from Use AutoFilter to filter and copy the results to a existing worksheet and would like to incorporate this into my VBA project. The problem however is that this code were written to perform on one workbook and this is where my problem is. My project is between two different workbooks and cannot seem to get this code modified to do what it is supposed to do between these two workbooks. Everything I have tried so far failed. In short what this code would do is to check the existing data on the one sheet (the source) and extract only the data which is meeting my set criteria, and copy this data to the destination sheet. This is what I would like to do between two workbooks. With this the sample code as provided by Ron de Bruin. The sample workbook could be accessed trough the following link [URL]..... With this the code for matching and copying on one workbook.
Code:
Option Explicit
'>>
'This example will copy the filter results below the existing data on the destination sheet.
'Note the sheet "RecordsOfTheNetherlands" must exist in your workbook.
'This example will not copy the header row each time so when you manual add the worksheet
'"RecordsOfTheNetherlands" to your workbook you must add the headers yourself on the first row.
[Code] ............
I'm having in trying to run a macro. The macro entails a simple copy and paste special over to a new worksheet. I used the auto filter as well to get rid of the non-blanks. It works fine when I copy and paste special over to the new worksheet, but as soon as I run the macro, it doesn't copy over and returns an error.
Range("A1").Select
Sheets("FEF").Select
Rows("1:390").Select
Selection.AutoFilter
Selection.AutoFilter Field:=5, Criteria1:="<>"
Selection.AutoFilter Field:=5
Selection.copy
Selection.AutoFilter Field:=5, Criteria1:="<>"
Sheets("FEFFinished").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
End Sub
In between a long VBA macro, I need to copy the result of autofiltering i.e. the visible cells / rows only, to paste on an other sheet.
If I do this manualy it works but if I record this on a macro, it records the absolute cells range I pick, when in fact the result of the filtering is different every time.
I need a vb code which would open different workbook automatically, autofilter the first row and select data and copy and paste in the other workbook.
View 1 Replies View RelatedI have two worksheets 1) PL dbase and 2) Waiting list. Both setup as Lists. Where Excel automatically inserts a new row as you click in the current rows...
I want to autofilter Waiting list column I for the value of "Yes"
Copy all the data autofiltered in Waiting list to the next available row(s) on worksheet PL dbase.
I have to extract all the entries that have certain words.
The worksheet has 600 rows, setup like
Column A=unique document number (never repeats)
Column B=Document Titles (some repeats, though the documents that are the same are not titled the same, though they have certain keywords in like documents)
Column C=Document Types
I want to search Column B for all titles containing the word/text string WOR, and then copy the row of A, B, and C when WOR appears in Column B, and put it into another worksheet.
Now obviously, I can do a "Find All" for WOR on Column B, but I can't cut and paste the results into another worksheet.
I prefer a simple formula, cause my VB and Macro skills are pretty non exsistant, though I will learn if that is what it takes.
I have this macro which does a really nice random selection, the problem I have though is that it deletes everything except for the result set. How to adjust the macro in such a way that instead of deleting the the original data, it copies and pastes the result set to a new worksheet?
Code:
Sub RandomSelect()
Application.ScreenUpdating = False 'disable screen updating to avoid screen flashing
Application.DisplayAlerts = False
Dim wbk1 As Workbook, wbk2 As Workbook, lstRow As Long, wks As Worksheet, startCut As Integer, selNum As Integer, lstCol As String
Set wbk1 = ActiveWorkbook
Set wks = wbk1.ActiveSheet
[Code] ......
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
View 9 Replies View RelatedFrom time to time the data on worksheet x changes and it is picked up by worksheet y and I need to copy and paste the new information to sheet z. I've been fiddling with the code to get it to paste the values and pick up the new values, but it won't.
I need to adjust the code to copy to the last column, and the last row, and copy just the values. Ifm unable to do t his.
I've attached the sheet so you'll see that the data will only copy once.
Go to worksheet z and press the command button.
I got the code from this site: ...
Is there to copy my vlookup results into another workbook?
I put together a marco that will select an range and paste it into a new document, however my vlookup results will not copy over.
Is there a way to extract my vlookup results and paste it into another workbook with the enclosed vba code?
Private Sub CommandButton1_Click()
'
' Macro2 Macro
' Macro recorded 4/24/2009
'
Columns("A:E").Select
Range("A2").Activate
Selection.Copy
Workbooks.Add
ActiveSheet.Paste
End Sub
Trying to paste filtered results except header row. My code below pastes the header row for "Details" 2x. I tried altering the row to row 2, but that caused incorrect results to be returned.
Detail - Sales
First I filter the data range for " Total Sales"
Paste the results with header row to wsDetails
Details - Details
Then filter the data again for "N"
I would like to paste these results to wsDetails w/o the header
Option Explicit
Sub comp_pl_ytd_Totals()
Dim wbBook As Workbook
Dim wsData As Worksheet
Dim wsTotals As Worksheet
Dim wsDetails As Worksheet
Dim wsExtract As Worksheet
Dim rngData As Range
Dim rngCrit As Range
Dim rngDest As Range
Dim arrCrit
Dim myRange As Range
Dim C As Range
Dim lngrows As Long
Dim strFormula As String
Dim rngCase As Range
With Application
. ScreenUpdating = False
.DisplayAlerts = False
.Calculation = xlCalculationManual
End With................
In my "MAIN" Sheet. Column A starts at 12th row and contains ONLY Strings. I would like to Autofilter Column A for every unique String (criteria) in Column A (from 12th row to 1000th row). Copy the thus filtered (i.e. visible) cells from (ONLY) column C (for every criteria). Paste the copied cells to a new sheet, starting from A4 of the new sheet. Give the name of the Criteria as the name for the new sheet. Come back to "MAIN" sheet and show a pop up "Sorted".
View 2 Replies View RelatedTrying to filter list and copy filtered data to another sheet in the same workbook.
I'm receiving this error:
Run-time error '438'
Object doesn't support this property or method
Worksheets("Data"). CurrentRegion.Copy _
Worksheets(" Totals"). Range("A1")
Sub GetTotals() ..............
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI wonder if someone has a clever solution for the following, I have a spreadsheet where I have done subtotal on some of the figures, does anyone know how I can copy (and paste into a new sheet)only the rows where I have a subtotal?
View 8 Replies View RelatedI've got a bizarre problem here. I've been working on a piece of code and one line has started behaving erratically: Sheets("BLANK SCORE").Copy after:=Worksheets(Worksheets.Count)
I want to do is create a copy of the sheet called "BLANK SCORE" and copy it after the last sheet in the workbook. This code is part of a loop that runs a maximum of 10 times (potentially creating 10 copies) and I've had inconsistant results such as:
*) Code works and copied sheet is created (desired result)
*) Code is ignored and no copied sheet is created (shouldn't do that)
*) Sheet is copied to a new blank Workbook (...huh ?)
I've also tried changing:.........
I recorded a macro to perform an Advanced Filter. I then adapted the range to & LastRow. My question is, can this now be adapted to remove the Select so the sheets are not selected when this is run.
Sheets("CIT Results").Select
Sheets("Open Calls").Range("A1:I" & LastRow).AdvancedFilter Action:=xlFilterCopy, _
CriteriaRange:=Sheets("Open Calls").Range("N5:V8"), CopyToRange:=Range("Q50"), Unique:=False
Moderators, can you please edit the Thread title. It should be "Advance Filter From and To Non Active Sheet"
I have a workbook with 50+ sheets. Within each sheet are rows of data in column A that I'd like to search for specific text.
I'd like to search each row from every sheet for specific words (e.g. "7 days" AND "Monday" AND "Tuesday" etc.) then copy the entire row containing all my search text in a new sheet on column A along with the name of the sheet it was found in in column B and the row number it came from in column C.
What I am trying to accomplish is to search through all the sheets and post results in new sheets for each search string.
I have a report that is run weekly that shows items that have been returned over the last 3 months. The report shows the original date of purchase and the return date, but not the number of days since the purchase and the return. I need to have any items that were returned over 15 days go to a new sheet and display just those rows of information.
View 8 Replies View RelatedI want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies View RelatedI have a large table which I am filtering 3 times. There should be results but the final VBA filter does not return them until I manually apply the filter. The custom filter is correctly populated with the criteria. The code that I am using is as follows:
VB:
Cells.Select
Selection.AutoFilter
Selection.AutoFilter Field:=9, Criteria1:="<>", Operator:=xlAnd
Selection.AutoFilter Field:=10, Criteria1:="=INV", Operator:=xlOr, Criteria2:="=CRD"
Selection.AutoFilter Field:=21, Criteria1:=">=" & DTPicker1.Value, Operator:=xlAnd
The first two filters work fine. The last does not. Oddly it works on some date picker values and not others, even if there are actual results and as mentioned earlier if I stop the program running and apply the filter (without typing anything else) it works fine.
I want to use the selection from a combobox on a sheet to set the autofilter. I know it is probably very simple but have not been able to find the answer by searching this forum. Below is the code I am using. It sets the filter to blanks for some reason.
Private Sub ComboBox2_Change()
Range("D9").AutoFilter Field:=1, Criteria1:=ComboBox2.Value, visibledropdown:=False
End Sub