Copy Rows From One Sheet To Another Based On Formula Results
Feb 7, 2014
I have a report that is run weekly that shows items that have been returned over the last 3 months. The report shows the original date of purchase and the return date, but not the number of days since the purchase and the return. I need to have any items that were returned over 15 days go to a new sheet and display just those rows of information.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014 28/1/2014 28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
i have a workbook that has a lot of sheets but i need to pull information from the one sheet "Veneer Log" i Need it to make new sheets with the same heading as on the "Veneer Log" (Rows 1 & 2) Sheet but it needs to be filtered by the "Product" Column (H) with a new sheet made for all the diffrent products i.e. Dimensional, Drywall, Corners - Thin V., Accents,..... so each product will have a new sheet with i am hoping someone can help me with this. This log changes Daily and it would be nice to have a sheet with only the same product on it to compare new orders so we can batch run. i hope i have given you enough information so someone can help me with this. i have attached a sample log the real log has about 10 worksheet for diffrent departments but i only need info from the Veneer Log Sheet.
I am currently working on a data analysis project (data mining) and need to collect and later analyze statistics for the inputs which control a series of calculations. These statistics are shown in the Statistics 1, Statistics 2 and Statistics 3 cells in the workbook that I attached. The inputs are X,Y; all possible values for these inputs are listed in the N,O columns. Basically I need a macro which would take the values from these two columns and place them pair after pair into the controlling cells (K3, L3), then it would copy cells H2 through L3 (updated stats) to a new sheet after each copy operation - so that I will finally have a list of statistics for all of the input pairs.
I have a single sheet that lists available items, prices, etc. When doing quotes, you simply put y/n in Col:A for each item. I then want a simple macro that will copy all of the rows with "yes" into a second sheet. Sample data with end result attached.
I did try and butcher this macro to do what I want, and whilst it does copy data across, it's not really working. Firstly as I think it is searching along a row and copy columns, whereas I need to search a column and then copy rows.
I have several rows worth of tasks with several columns associated with each one of them. In other words, each task will have some event, comment, date etc. and a flag at the end if it's complete or not. Below is a very simplified idea.
A B C D
1 Event Date Done
2 Party 12/10/2013 Yes
3 Marathon 12/20/2013 Yes
4 Graduation 01/15/2013 No
Formulas that I have used so far have accomplished everything I need except one thing. I would like to copy rows to a different sheet (tab) based on the flag condition i.e. if the string says "Yes" (in this example), I would like to copy that row to a different sheet and do that for each row. In the example above, rows 2 and 3 would be copied to a different sheet creating a list/summary of complete events. As that is copied, I would use that information again on that new sheet to do more things.
I have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
a macro button on my excel sheet that should do the following.
i have a range (Ex: E3:E46) which is being continuously filled, i need to transfer the information to another sheet depending on column "E", (Ex: if "E3" = "A" paste row to sheet2 if = "B" paste row to sheet3) and so on each row could have another string in column "E".
after the paste is done it should clear the range making place for new entries, that should also be copied finding the next empty cell (it shouldn't delete the old entries)
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
I wonder if someone has a clever solution for the following, I have a spreadsheet where I have done subtotal on some of the figures, does anyone know how I can copy (and paste into a new sheet)only the rows where I have a subtotal?
I've got a bizarre problem here. I've been working on a piece of code and one line has started behaving erratically: Sheets("BLANK SCORE").Copy after:=Worksheets(Worksheets.Count)
I want to do is create a copy of the sheet called "BLANK SCORE" and copy it after the last sheet in the workbook. This code is part of a loop that runs a maximum of 10 times (potentially creating 10 copies) and I've had inconsistant results such as:
*) Code works and copied sheet is created (desired result) *) Code is ignored and no copied sheet is created (shouldn't do that) *) Sheet is copied to a new blank Workbook (...huh ?)
I have a sheet that I need to routinely filter for a specific code then paste it into a different sheet in the same workbook. I would love to set up a simple macro that would do this for me, but I can't seem to figure it out.
In the results I would like the header row if at all possible, but I can always just make it part of the macro.
I am having trouble copying and pasting the results of a calculation on one sheet to another sheet. I believe my problem is that my destination cell is actually two cells merged so the destination is obviously not the same size as the source. Here is the section of code I am working on:
Code: Sub CalculateDeviceFailureTimes() ' ' Used to manipulate the UEM data file to find the outage times of different devices in the Astro System ' Dim Output As Integer
Like I said the section after the initial 'If' works and 0:00:00 is entered into the cell D15 with no issue. My problem comes when I try to copy the result of the formula in 'G3' to 'D15'. Like I said I believe my problem is that 'G3' is a single cell and 'D15' is two cells merged..
I need to filter a large database using multiple OR criterias.
Database is CUSTOMER NAMES in each row with CONSUMED PRODUCTS following in each cell.
I want to filter two or more products and list customer names in sheet2. Like listing customers using salt or pepper Filter criterias will be entered into cells in sheet2 with results shown below and I want search to be active and alive just like vlookup function.
I have 4 source workbooks and a master workbook which is linked to the source workbooks, if the source workbooks have no value in specfic cells the master workbook which is linked to it shows a 0 (not a problem). Now if I want to copy only cells which have a value other than the 0 to the end of used rows on another sheet on the Master workbook using VB I run into a problem because it sees 0 as a value and copies as well.
The issue is how do I stop the 0 showing and not being seen as a value. This 0 shows regardless of format.
I have a workbook with 50+ sheets. Within each sheet are rows of data in column A that I'd like to search for specific text.
I'd like to search each row from every sheet for specific words (e.g. "7 days" AND "Monday" AND "Tuesday" etc.) then copy the entire row containing all my search text in a new sheet on column A along with the name of the sheet it was found in in column B and the row number it came from in column C.
What I am trying to accomplish is to search through all the sheets and post results in new sheets for each search string.
I am performing an autofilter within a spreadsheet to display only those lines where a name exists in column A. Then I delete all hidden rows. I am having a problem when the autofilter results in no rows being visible. Here is the code I am using for the delete hidden rows:
On Error Resume Next ' In case there's no hidden cells
With Cells Set rngHidden = .SpecialCells(xlCellTypeVisible) .EntireRow.Hidden = False 'Unhide all cells rngHidden.EntireRow.Hidden = True 'Hide previously visible cells .SpecialCells(xlCellTypeVisible).EntireRow.Delete 'Delete previously hidden cells rngHidden.EntireRow.Hidden = False ' Unhide previously visible cells End With End Sub
I am attempting to copy the results of a formula in a column to a row. The data in the column is in a different worksheet. Although pasting the data using the transpose option in the drop down menu works, I really want to have the results of the formula returned. The reason for this is the results are variable based on the formula.
From time to time the data on worksheet x changes and it is picked up by worksheet y and I need to copy and paste the new information to sheet z. I've been fiddling with the code to get it to paste the values and pick up the new values, but it won't.
I need to adjust the code to copy to the last column, and the last row, and copy just the values. Ifm unable to do t his.
I've attached the sheet so you'll see that the data will only copy once.
I am building a workbook. The data we are tracking is all in one xml file, which i have mapped to 3 different worksheets(customers, invoices, inventory). On the customers and inventory sheet I have an interface for creating a new customer/product/invoice. I used the macro recorder to make the macro's to do these three things, but could use help on a couple of other functions as I don't actually know VBA. I need to be able to automate editing of existing records by having a button to press on the each sheet that will open an input box that asks the user which invoice number, customer number or product number he would like to edit, then copy that record to the interface for editing, then another macro to replace the existing data with the newly edited data. It would also be wonderful if when creating or editing an invoice it could create a copy of the interface worksheet and rename it as the invoice number. The first row of each datasheet is blank, and each of the interfaces have formula's for importing the information copied to row 1 from the data tables. the second row of each datasheet contains formulas for importing data from the interface. Any help would be terrific...I know you guys are excel gods and I will forever be in your debt if you can help me out....thanks in advance, I'll be studying my butt off until I figure this out
I have a worksheet that contains 3 columns, A, B, C, that I need to run through auto-filter and copy the results from a cell, F2, into another sheet each time the filter criteria changes.
Although the worksheet will contain over 11,000 rows (the attached sample file is trimmed down to around 1000 rows),
Col A will only have 8 different possible criteria for autofilter: 1,2,3,4,5,6,9,10 Col B has around 70 criteria, and Col C has around 700 criteria.
The number of rows in the sheet and consequently the auto-filter criteria will likely change each time (but will usually hover around these quantities).
As an example, here is how I would envision this working for Col C:
1. Starting on the 1st Sheet (named "FW15"), I auto-filter Col C on criteria/value 1 2. I copy the resulting value from Cell F2 of sheet FW15 and paste it into the first empty cell of Col C in Sheet 2 (named "CopiedResults") 3. I return to my first sheet, FW15, turn off the enabled filter for criteria/value, and turn on the next autofilter Criteria/Value of 2 4. Repeat Step 2 . . . Keep looping through Col C to make sure that all auto-filter values have been applied, and all resulting values contained in Cell F2 are copied over to the second sheet.
Likewise, I would need to run through the auto-filter criteria in Col A and Col B, and copy their resulting values (from cell F2) into Sheet2 Col A and Col B.
1) I have an invoice form, and need to create a formula that will allow me to calculate a discount IF an item number begins with "C" or "CE".
Example: Item # is in cell F12. (may or may not begin with "C" or "CE")
Item price is in cell J12.
Extended price (qty x price) is in cell K12.
In L12, I need to calculate a discount (from % in fixed cell L9) on the figure in K12 - based on whether or not the Item # in F12 begins with a C or CE.
If it does not begin with C or CE, then L12 needs to equal 100% of K12.
(The 2 parameters I referred to in the title were:
C, followed by a number CE followed by a number )
2) The biggest part of the dilemma is that the person using this spreadsheet is totally unfamiliar with Excel formulas, spreadsheets in general, and has to send this finished product to a client each week. So I need this to be as simple as possible - which seems to me to be a formula (that can be copied to insert rows, etc. if necessary).
All detail data begins in Row 6 in the detail spreadsheet.
In the Summary spreadsheet, it appears to make a difference where my calcs are located in order for my COUNTIF's to work correctly. As long as I keep my summary calc (to total the number of work orders in the detail) in Row 2 of the Summary, it works fine...but if EITHER I move my calc down a row OR if my detail drops down a row because a row was added above (where I have just header info), my summary totals change?!?! I don't understand.
Here are two examples of the calcs I'm using in the summary:
Can someone tell me what is going on? What I'm doing wrong?
I have in column A a list of investment fund names. In columns B to D is respectively for each fund its Market Value, the Rate of Return and the Rank (1, 2, 3 or 4). I am trying to create a formula that will calculate the market value-weighted rate of return for each ranking.
For example, the 3 funds that rank first have market value weights of 10%, 12% and 13%, and rates of return of 1%, -3% and 5%. The total market-value weighted return for the top-ranked funds would therefore be 0.39% (i.e. 0.10*0.01-0.12*0.03+0.13*0.05)
The formula would first need to look in the ranking column to identify those funds with a particular rank (column D), then calculate their weights by dividing their market value by the total market value of all funds (column B), and finally multiplying these weights by the rate of return (column C), before summing the results to say, for example, that the total market-value weighted return for the top-ranked funds is 0.39%
So basically I have a spreadsheet that tracks if a patient has turned in there required paperwork within the last 6 months and then changes the cell to white and lets me know how many days they have left until they are due to turn this paperwork in again. Then if it has expired I have a condition format change the cell to Red but I would like to add in the text EXPIRED to the cell. lastly I have Cells that have no data in them gray and I would like to add in red text saying No Paperwork.
I'm hoping this will be my last build of this spreadsheet so I can go ahead and start applying it to the real workbook [URL]