Saving Excel Sheet As PDF?

May 26, 2013

I got a problem saving an Excel Sheet as PDF. The problem is that i cant see some parts of sheet on the PDF file. I have uploaded 2 files one of which is that .xlsx file which i want to save as PDF, the other is the PDF file that i see after saving which is not desirable.

View 1 Replies


ADVERTISEMENT

Saving Excel Sheet As TXT?

Jan 27, 2012

I've got a macro that generates some parameters and after they have been generated, the values have to be saved in text file. The problem that I'm facing is that the text file saves the values in double quotes.

I've been searching online for a solution to the problem and what I've found is that if the cell value in excel includes a comma, the resultant text file will store the entire value in double quotes.

I'm using the save as method and I read that if you provide the save format as xlTextPrinter this problem will not occur, but the limitation is that it can only work with values less than 240 characters in length.

View 5 Replies View Related

Saving Excel Sheet On Network Location

Mar 21, 2014

I am currently having a slightly annoying issue that only happens 50% of the time, that when trying to re-save a excel sheet on a network location. The network location is a folder on another computer. The same happens when I try and save it as a pdf, but only happens half of the time.

The message which pops up says something along the line of 'Saving as: 'File-ServerDocumentsexcelsheetexample.xls' ' and a sort of green loading bar appears. It does this for about 15 seconds then goes off.

I've checked our anti virus (which is eset) and I've set it to not real time scan network locations.

I have attached a example of the saving message: ExcelWarningExample.jpg

View 2 Replies View Related

Saving Single Sheet From Excel File To PDF

Dec 10, 2012

I want to save a single sheet from my Excel file to PDF. But this Macro saves all the sheets in separate pdf files. How do I adjust it to only save the breakdown sheet of my Quoting workbook?

Sub Save2PDF()
'
' Save2PDF Macro

Range("L66").Select
ActiveWorkbook.SaveAs FileName:= _
"Macintosh HD:Users:myratriegaardt:Desktop:Q1Breakdown.pdf", FileFormat:=xlPDF _
, PublishOption:=xlSheet
ActiveWindow.SmallScroll Down:=-160
End Sub

View 4 Replies View Related

Excel 2007 :: Saving And Loading Single Sheet?

Dec 21, 2011

My set up office 2007 win xp pro ie8

is it possible using vba ideally with a button marked save, to save a single worksheet and name it, in CSV format

Then I would like to be able to do the reverse load a CSV file back in to a work sheet

Expanding upon this

1. Click a command button with caption “save”

2. Take the name of a given sheet, in my case DataToUpLoad and append it with a number to give a sheet name of DataToUpLoad 1 the first time it is save and DataToUpLoad 2 the next time and so on

3. Click another command button with the caption “load” interact with usual dialog box.

My current work around is to copy a sheet open a new work book past the sheet in the save that work book as CSV

The reason this is required is to mate up with the php on the server side

View 3 Replies View Related

Saving Just One Sheet

Jul 8, 2006

if it is possible to save just one sheet out of a workbook. I suppose it would save as a whole new workbook with just that one sheet, which is fine.. but is there a command that does this?

View 9 Replies View Related

Sheet Not Saving To Location

Feb 3, 2014

In the attached sheet in module5 I have a save macro with this code

HTML Code: 

ActiveWorkbook.SaveAs Filename:="D:Picking Logs" & _
Replace(sFile, "/", "-"), FileFormat:=52

-This saves it to my computers D drive and works fine.

Then I also have the following code whice is suppose to save it to the public drive which is U: drive, but this computer does not have direct access that that drive so i save it to

HTML Code: 

ActiveWorkbook.SaveAs Filename:="wcrsan1
owley public1 picking logs" & _
Replace(sFile, "/", "-"), FileFormat:=52

-The wcrsan1 is the path i use to save it to th U:drive.

My issue is the code runs fine, but it does not save it to wcrsan1 owley public1 picking logs. If i save it manually it works but not when the macro runs it.

VBA is password protected.. The password is Kayley98 the sheet password is go

ho.xlsm

View 2 Replies View Related

Return To First Tab In Sheet After Saving

Aug 11, 2009

I am working on a project for work and my first tab is titled "Directions". I have over 500 users coming in and edit multiple tabs at the same time. Is there a macro/or option that would after a user saves changes, would return to the first tab "directions" so that my other users wont be in the middle of what the last person edited?

View 9 Replies View Related

Saving Sheet But Not The Entire Workbook?

Mar 14, 2013

All I want to do is save a copy of one sheet called "Patient Stock Form", change the name to "Patient Order", and put it into an email. But my code is putting the entire workbook into the email. Here's the code:

VB:
Sub EMAILFORM()
Dim oApp As Object ' Outlook.Application
Dim oEmail As Object ' MailItem

[Code]....

View 8 Replies View Related

Opening New Workbook And Saving Sheet.

Oct 21, 2008

I am trying to write code which copies the activesheet (called "Data"), opens a new workbook, pastes the data into it and closes the new sheet as "sales 2008" followed by the date. What I have at the moment is:

View 3 Replies View Related

Saving Filename From Cell Value In Sheet

Dec 2, 2011

I would like code to automatically save my spreadsheet with the name that is present in cell F4 of the activesheet. For example, I would like to save my file to desktop and cell F4 contains the text 'hitec 348'

View 5 Replies View Related

Saving Sheet As Tab Delimited Text

Jun 18, 2008

I have a workbook with sheets of data that should be imported into another system. So i would like some code that does the following:

1.) make a copy of worksheet x and paste (paste special) the values in a new worksheet.
2.) Delete row 1 in new worksheet (the labels)
3.) Ask the user for a file name and path and save the worksheet as a tab delimited txt file.
4.) Delete the worksheet created in 1.)
5.) Leave the user with the original .xls file
I will assign this macro to a button so the experience for the user is:
1.) press button
2.) input file name and location and have a text file saved
3.) be left in the original xls document.
I tried with the following code but get stuck with this error : "Run-time error 91: Objeck variable or with block variable not set."

Sub Export_x_DK()
Dim w As Workbook
Application.ScreenUpdating = False
Application.DisplayAlerts = False
ThisWorkbook.Sheets.Add After:=Sheets(Sheets.Count)
ActiveSheet.Name = "Export_2023"
Sheets("Depreciation x (DK)").Select
Cells.Select.........................

View 2 Replies View Related

Keep Sheet Names Unchanged After Saving Them As TXT Files

Mar 24, 2014

I want two sheets of my Excel workbook to be saved as txt file. The name of the file is compiled of a fixed part ("TrialList" or "BlockList") and two values from another sheet (subject and session number):

[Code] ........

Now, saving the text files with the desired file names works perfectly. However, Excel decides to change the names of the sheets that have been saved as text files accordingly. This is something I want to prevent from happening, since a second loop of actions will end because of the unexpected sheet names...

View 1 Replies View Related

Excel 2007 :: Not Saving Formatting Changes

Oct 13, 2008

I have someone in the company that I work for that is using Excel 2007 in compatibility mode, that is trying to make changes to an Excel 2003 file.

The file in question is a large one. She can type in the rows and columns and anything that she types will save. However if she trys to make any changes to the file in terms on calculations or highlighting specific columns, then these changes are not saved.

I have found out though that if she saves this 2003 file in the 2007 format, then all over her changes will save. She can't save it in the 2007 format due to some people still on 2003 that edit this file as well.

View 10 Replies View Related

Saving Default Settings In Excel

Aug 20, 2013

I am working on lots of excels, with data queries from sql and pivot tables. Is there a way to set defaults to some settings in excel (not in this specific file).

To be more specific:

1. Import data from SQL: Refresh on opening, save password
2. Formatting of number to have two digits and a comma separator
3. Pivot table: when adding to values sum instead of count, refresh when opening the file

View 1 Replies View Related

Saving Data From Excel To Access Through VBA

Mar 12, 2014

I have created one Info path solution to gather information from different locations to one hidden Access database. And in last month or two I already have more than 30 000 entries in database. On other side I have created 2 excel workbooks, one for purpose of report that has all connection done through VBA, user just opens it, clicks button and gets report and one workbook that is for other set of users so they can change 2 specific columns of data, everything else is locked. When one department fills value it should fill based on gathered information, and clicks save that cell or cells are being locked.

At first I did on worksheet change event, when user changes a cell (enters information) it triggers worksheet_change event and saves that value in database and colours cell green. But, then users start complaining that when they use copy paste or the use fill paste option (just pull value from one cell to others) it does not save value. Ok ... that is because worksheet_change event does not trigger in situation when copy paste in any form occurs.

So how to solve it ... when pulling data in excel I pull identical table (data) in other hidden worksheet. When they change what they need to change, they click button "save to database" i have created and there is a macro that makes other sheet visible, goes through the records and saves where cell value in table that is being entered is different then same cell in hidden table.

Problem is that sometimes my code works without a problem and sometimes they get an error. I cannot figure out when. When a lot of users use that excel file, for some users it is a read only file, and as I presume that is ok, because macro works in any case and data are stores in database so excel file itself does not have to be saved.

Here is code.

[Code] .....

View 1 Replies View Related

Excel 2010 :: Saving To TXT Files?

Nov 23, 2011

I'm saving information from excel 2010 in to a text file (txt), when doing this and opening up the txt file the below line is saving it with " at the start and at the end of the line.

:32A:110809GBP4,00

Is there any way when saving as a text file without the " pulling through at the start and at the end of the line?

View 2 Replies View Related

Saving Excel File As Macro

Nov 13, 2013

I'm using this bit of code to save a cvs file as an xls file.

Code:
'Save file
Dim Filename As String

Filename = Application.GetSaveAsFilename( _
fileFilter:="Excel Files (*.xls), *.xls")
If Filename "False" Then

ActiveWorkbook.SaveAs Filename
End If

However, I would like the file to be named Win7Sync-

View 5 Replies View Related

Saving Batch Files From Excel

Nov 22, 2013

I currently have 3 batch files that I would like to be able to update using VBA instead of manually adding the information to each one. My goal is to be able to use my excel file and when I add new lines I could then run the script to save and/or update each of the batch files. I would like to be able to add the new lines I added in excel to the end of the batch files. I use the batch files for automation purposes but I do not like the fact that I have to open each one and added the same lines three times. This is why I want to be able to update my excel file and then add those new lines to the batch file. An example of how to accomplish this task using VBA would be awesome.

View 2 Replies View Related

Macro For Saving Multiple Rows Of Data To New Sheet

Apr 14, 2009

I am looking to save a range of data from an input sheet, to a data sheet.

I know how to save indivdual cells to a worksheet in the form of a data

what i am looking to do is save A6 - J6 down A19 - J19, but only saving the data which is entered

A6 - J6
A7 - J7

View 6 Replies View Related

Protected Sheet With Timestamps And Locked-after-saving Cells

Dec 31, 2013

I have this excel sheet I'm trying to create (to make my life better at work). It's to track credit card refunds. It'll be saved on sharepoint. So my department will fill in the data on the "Ops" side, and then the accounts department will fill in their side. It's very rudimentary, but anything is better than the old, tattered BOOK we are currently using.

So far, I have the user/date/time stamps autofill, when the user fills in "Entered by" or "Recieved by". I have those cells locked so no one can edit it. I have separte passwords for both sides (Ops and Accounts).

What I want now is to be able to:

1. Lock each line once it's been entered and saved. Say my department fills in one entry. We save it. After that, it CANNOT be edited. If there are any changes, I'll put in a remarks column so people can enter stuff.

2. If someone enters the first two columns (Guest name, booking number), then the "Entered by" HAS to be filled, or the workbook cannot be saved.

3. ONLY letters can be used for Guest Name and Entered by. I've tried different things for this. While I've managed to make it work if the user enters a digit first, I can still enter John56, and it'll pass. I need it to only allow letters (and spaces).

4. The "Booking Number" should only allow six digits. No less no more than six digits. It can be 000001 even. But it has to have six. And, obviously, no letters, no spaces.

In the "ThisWorkbook" module, I've got this code:

Code:
Private Sub Workbook_Open()
Dim wSheet As Worksheet
For Each wSheet In Worksheets
wSheet.Protect Password:="hurlEy!", _
UserInterFaceOnly:=True
Next wSheet
End Sub

In the sheet1 module, I've got this code:

Code:
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
On Error GoTo enditall
Application.EnableEvents = False
If Target.Cells.Column = 3 Then
With Target
If .Value "" Then
.Offset(, 1).Value = Environ("username")

[code]....

View 1 Replies View Related

Excel 2010 :: Keeps Crashing And Not Responding Or Saving?

Mar 9, 2012

I have a genuine copy of office pro 2010. All works fine except excel!

It seems to be mainly on one workbook I have brought over from open office and on a mac! It wont save due to errors it won't tell you about? It then stops responding or crashes? Wont save as etc....

I have repaired, I have even deleted and downloaded a new office pro genuine and installed and doing the same so i guess it has to be the file?

BUT it seems to work on another laptop we have, same file, same excel????

The only thing i seem to be able to find is in the permissions it has an "unknown account"? Also under the file menu where it allows you to check the file it states something about conditional formatting i have used and not being compatible BUT i cant for the life of me find that in the menus to get rid?

View 10 Replies View Related

Excel 2007 :: Saving As Text Tab Delimited

Apr 18, 2013

Excel 2007 on windows 7 professional.

We've got an end user who opens a .dat file which is delimited with semi-colons, replaces some text in a couple of columns then saves as a text tab delimited file. She swears that before today, the saved file would retain the semi-colons. Now she says it's not. she generated a new .dat file for me and recreated the process, with the resultant semicolon-free file. I asked her to generate another one and send it to me. I opened it first in notepad, and saw the semi-colons.

Opened it in excel (I'm using 2010 on win 7 professional), which saw it as a delimited file and asked me to specify the delimiter. It shows up fine, all the columns are righteous. I made no edits and saved as a text tab delimited, and that saved file had no semi-colons in it when I opened it. This seems normal to me; there's no semi-colons in the excel file, so why would there be in the text tab delimited file. I asked her coworker to generate another .dat from his pc and let me know what he sees, but he hasn't reported back yet.

View 5 Replies View Related

Prevent Saving Of Excel If Certain Condition Not Fulfill?

Feb 7, 2014

I want this statement translated into a macro.

Do not save file year.xlms if total of column N in sheetR does not match with total of column O in that sheet. I also want a msgbox if this happens.

View 4 Replies View Related

Excel 2010 :: Unfilter Workbook Before Saving?

Feb 16, 2014

In order to unfilter a workbook before saving, that is often left by the users with filters on, I use the following code:

[Code].....

The code works just perfect for a workbook that has a table in a normal range of cells.

If I insert a table (using Office 2010 and later option), the code simply doesn't work.

View 5 Replies View Related

Excel 2007 :: Add Suffix (1) To Filename When Saving?

Aug 29, 2012

I find, when performing a 'save as', xl puts in a default filename with a suffix (1), or (2), or (3) and so on, to the existing filename, after I have opened a file from MS Outlook. I had assumed it was because there was already an existing file in the default directory, and so it was creating another version, but no other files with the same name exist in the default directory being saved to, or on the remainder of my computer, so I don't understand why this occurs.

View 2 Replies View Related

Excel 2010 :: Saving And Emailing Macros

Aug 26, 2013

How/ where to save macros. If I save a macro "normally" ("in this workbook") then it only applies to that one file, right? And I can't use it in any new files.

So what do I do if I want a macro I can use in "all" my Excel files?

And can I email a file containing a macro to a colleague, so he can work on the file, using the macro too?

I ask, because I've had trouble with this in the past (tho in MS Word) where I couldn't get the macro to be emailed along with the file...

Also - how can I get an .xls file with a macro to work in newer versions of Excel? And can I use Excel 2010 to save a file with a macro in an .xls format, so it can be opened in older Excel versions too?

View 3 Replies View Related

VBA To Export Query And Open Excel Without Saving

Jan 31, 2014

I am trying to export data from Access to an Excel file without saving the file. I have been unable to get my macro to work. Right now when the macro runs it only opens a new Excel workbook but does copy the data into the workbook.

I believe the issue lies in the generated strSQL. I suspect that it has to do with the Status field value equal to IVR Call Needed. Maybe the spaces in the value?

Here is my code.

Code:
Private Sub Export()
'Step 1: Declare your variables
Dim MyDatabase As DAO.Database

[Code].....

View 1 Replies View Related

Excel 2010 :: Sending Active Document Without Saving?

Mar 21, 2013

I have a problem concerning sending an active word document via mail. I have a worksheet with various information in it, that I am exporting to a word document. I then want to send the word document via email. I want to do this without saving the changes in the word document. I am working with excel 2010. I have posted some of my code below.

VB:
Sub letter()
Dim myWord As New Word.Application
Dim adr As Variant

[Code]....

I get the following errormessage: "Compile error. Wrong number of arguments or invalid property assignment"

View 2 Replies View Related

Saving Excel Documnets ... Open First Worksheet Every Time

Apr 17, 2009

I have a workbook with several worsheets in it. I wish to have the first worksheet as a list that will be hyperlinked to the other worksheets within the documant.

Is it possible to save the workbook so that it will open at the first worksheet every time irrespective of what worksheet you were on prior to clicking save.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved