I want to select a customer name from a ComboBox in a UserForm and populate a TextBox with additional customer information for the end user. The additional customer information is always located in C3 in sheet2 (the result of a formula). However, the text box only refreshes when I click into it. Is it possible to have it refresh without clicking into the userform textbox)? I’ve tried _Change and _Afterupdate. I'm sure this must be easy for anyone but a novice like myself. Sample attached (play marco...button dead?).
Private Sub ComboBox1_Initialize()
Me.TextBox1.Text = ""
End Sub
Private Sub ComboBox1_Afterupdate()
Me.TextBox1.Text = Worksheets("Sheet2").Range("C3").Value
End Sub
From an Excel form combobox I can select one number from a list (from column A). Once selected I want the value in the adjacent column D to show in a text box, with the option to change that text box value, with the change reflected in column D cell.
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code: Private Sub UserForm_Initialize() Sheets("Sheet3").Activate Dim ColARange As Range
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
On a sheet named "Matrix" I have rows of data in columns A, B, and C. I have the following code in a ComboBox that will show names from column B of the Matrix sheet.
There is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.
I am creating a Userform and one of the elements on it is a combobox where the user has to select their name. On the same Userform, I want to have a textbox (or listbox or another combo box if necessary) which will show the users default cost centre based on the initial combobox selection. I've tried doing this various ways, but I can't get the textbox to update when the combobox selection changes.
I have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...
So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...
Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...
I'm using Excel 2010 on windows 7.
Code: Sub UnHide_NewRoutings() If (Engineering.ComboBox2.value) = "0" Then Engineering.Label4.Visible = False Engineering.TextBox5.Visible = False Engineering.Label9.Visible = False Engineering.TextBox9.Visible = False
I have 3 name range in a control sheet ("Control")
Namerange Cat1, Cat2, Cat3. All of the name range are different. I am trying to cut down on my Userform that have each a userform with combobox selection.
Frmcat1, frmcat2 frmcat3.
I need to simplify my life. I need that if the user selects anything between F5:F20 to generate the userform and select range Cat1. If the user Select G5:G20 then to generate Cat2 and so on...
So on userform Initialize look if the user is in Column F, is yes then Cat1. If user in Col. G then Cat2 and final if user is in Col H to have Cat3 generate in the combobox.
I am looking for assisitance in combining the functionality of two seperate combo box code sets. The first combo box code set allows the combo box to automaticially appear when a user Clicks on a cell that contains a data validation list. The second set of code will have a combo box appear when a user Double-clicks on a cell that contains a data validation list. And the code allows for Named Ranges on a seperate worksheet. I would like to have the functionality of having the combo box to appear when a user Clicks on a cell and not having to Double-click. Also, I would like to have the option to use Named Ranges on a seperate worksheet ("Validation Lists").
Private Sub Worksheet_SelectionChange(ByVal Target As Range) Dim str As String Dim cboTemp As OLEObject Dim ws As Worksheet Set ws = ActiveSheet On Error Goto errHandler If Target.Count > 1 Then Goto exitHandler Set cboTemp = ws.OLEObjects("TempCombo") On Error Resume Next If cboTemp.Visible = True Then With cboTemp .Top = 10 .Left = 10 .ListFillRange = "" .LinkedCell = "" .Visible = False .Value = "" End With End If................
open attached file: For example, if I click "show matching lists" button and select from combobox st8 / b1 / b4. I need in cell K2: 3472.9 and in cell L2: 3472.9.
I have searched and have not been able to find an answer to this question so it might be a little unique possibly. I have an ActiveX combo box that I am trying to do something with. The text that I want to appear in the combo box is already there and I did this by creating a list and referencing it to the combo box. So the combo box has the following four items in its drop down:
Boat Car Plane Walk
Now the part I cannot figure out is how to make a selected value appear in another cell based on what was selected in the combo box. For example, if boat is selected in the combo box, then I want the value 25 to appear in a cell. If Plane is selected in the combo box, I want the value of 100 to appear in a cell. For walk 5, and for car 22. I know this can easily be done with data validation and a validation drop down list but I do not want to use that but need to have a combo box do it instead. I just don't know if it cannot be done as a list or not and have experimented with INDEX but not having any luck there. I do not want to use any macros for this either. Basically I am wondering how I can make my combo box work just like data validation drop down menu bar with formatted values outputted into a cell.
I have a userform that has two comboboxes to search data on a sheet and a textbox to input data to a specific cell on the same sheet. The cell that the textbox writes to is determined by the combination of choices selected in the comboboxes. The comboboxes are searching as required but I don't know how to determine which cell to write my data from the textbox to. I'll attempt to clarify...combobox1(drivename) searches the data in column C, combobox2(unconformlist) searches the data in column H. The combination of these determines a specific row and I need to write data from the textbox(initials) into this row in column M.
Private Sub CancelButton_Click() Unload Me Sheets("Index").Select End Sub
Private Sub initials_Change() initials = UCase(initials) End Sub
Private Sub OKButton_Click() Dim ws As Worksheet Set ws = Worksheets("QAQCconformity")...................
I thought I had finished my project but I keep getting errors, the latest one being that I have 2 comboboxes on userform "timekeeping". When I press the commandbutton "Submit", I want the values in the textboxes on that form to be placed in the spreadsheet, depending on what the selections the user has made in the comboboxes but I keep getting an error saying that the macro doesnot exist in the workbook even though it does!
The file is too big to upload here so it is found on rapidshare
I have text in one cell and I need a text box to show the text from that cell.
For example, if I have text in B2, on a text box I put the forumla =B2. The issue I'm experiencing is that the text box cuts off the text. There's no logic to why it cuts off the text, it's not limited to number of characters and I've played about with the margins and wrap texting, etc, all to no avail.
I've attached a photo of the worksheet to show what I'm experiencing. [URL] ..........
how to show a value in textbox form. So i have some columns in an excel file , but i want to show the last cell value of the column Amount in the textbox.
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I have two TextBoxes (txtSpan & txtTrib) in a UserForm (frmSizes), when values are entered in these TextBoxes they show (as they are typed) in cells of the spreadsheet. The resulting calculation is in cell B11.
How do I get the value in cell B11 to show in a third TextBox (txtAns) as soon as it is calculated without closing the UserForm or running another code?
I'm quite new to VBA, but I am attempting to get a Forms ComboBox to appear or disappear based on whether a certain cell (P7) reads YES or NO. P7 in turn updates in turn based on a user-selected value. As of now, the ComboBox only appears or disppears if I go back in and out of the formula I entered into P7. Basically, I want my ComboBox to dynamically update based on the value in P7. That may sound a little muddled, so here is my code for the ComboBox:
Code: Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("P7")) Is Nothing Then If UCase(Target) = "YES" Then Me.Shapes.Range("Drop Down 30").Visible = msoTrue Else Me.Shapes.Range("Drop Down 30").Visible = msoFalse End If End If
I have a user form with a ListView box , I am trying to get 2 things done;
1- When I type a text or a number by using "Search Box" I like to search the things in the ListView box items and highlight whole row
2- When whole row highlighted I like it to show the "Ref" item (Colum 5) in the text box which is called "Invoice No". Also when clicking the row I like the "Ref" item to show in the "Invoice No" (Column 5) text box.
Users select a row number which then opens up a Userform. Comboboxes and Textboxes on this Userform are then populated with coloumn values (dependant on the row initially selected). If the row number was the same each time I could accomplish this by the following.
Private Sub TextBox1_Enter() TextBox1.Value = Range("a1") End Sub
but as its a variable I'm trying the following (which I think should work)
Private Sub TextBox1_Enter() TextBox1.Value = Range("a" & edi & "") End Sub
I think I need to declare the variable 'edi' as Public. If so where should this be? I've tried 'Genereal Declaration'
I have a list of departments on "Employee Data" sheet on column A and list of staff names on column B. It looks like this:
DEPT FULL NAME
pdi Bob Tan pdi John Christian aftersales_bikes Jim Yeo
I have 24 departments in total and 300 over employees in mt employee data sheet.
On "Jan - June 2014 Training Hours" sheet, when employees attend training courses, I will have to update what courses they went for, no of hours etc.
My problem is:
I would like to select the department (using combo box for the auto complete function) and when department is selected, the staffs in that particular department will show. I have attached the file for your understanding. Currently, I am using data validation with indirect function in that file but would like to switch to combo box.
I have a userform used to input data. I contains textboxes and comboboxes and a command button that is clicked on to record the data onto a worksheet.
What I am looking for is a combobox that is linked to a list of clients (column A of worksheet "Clients").
I would like the user to click on the combobox and select a client name. If the client is new then I would like the user to be able to type in the new name and, then have that name available in the "Clients" names that appear the next time the user clients on the combobox.
I have it almost working, but not quite.
I have a defined name on the "Clients" worksheet as follows:
On another worksheet, I have multiple comboboxes from the Controls toolbar in a column, each having possible selections are based on the data in a column 1 above (ie. A,B,C). When a selection is made in any of these comboboxes, cells to the right of the combobox get populated with the corresponding remaining data from the above cell range - ie. when A is selected, 1,2,3 appears to the right of the combobox, when B is selected, 4,5,6, etc. I want to be able to make selections from within combo boxes, not only by using the combo box dropdown and select mechanism, but also, if possible, by pasting a cell range whose data matches one of the existing selections available in the combobox definition. In other words, if I have a single column cell range from somewhere with the following data in 1 row:...............
I am programming some kind of database in excel and using comboboxes as drop down lists to enter some of the information in the DB. My problem is that when the file is saved, closed and then opened again, all of the comboboxes have lost their selection. I think that using the ControlSource might help but for some reason I can't find the proper syntaxe to make it works. Actually I am getting a Run time error 438: This object doesn't support this property or method.
I have included the relevant portion of my code below. Is the ControlSource property going to solve my problem? If so, what is the syntax I must use? If not, what can I do to make sure that my ComboBoxes are going to keep their selection?
ActiveSheet. OLEObjects.Add(ClassType:="Forms. ComboBox.1", Link:=False, _ DisplayAsIcon:=False, Left:=hori_offset - 220, Top:=vert_offset + 78, _ Width:=180, Height:=24.75).Select With ActiveSheet.OLEObjects("ComboBox1").Object .Font.Size = 14 .Font.Bold = True .Style = fmStyleDropDownList 'Use drop-down list .BoundColumn = 0 'Combo box values are ListIndex values End With With ActiveSheet.Shapes("ComboBox1") .OLEFormat.Object.ControlSource = "Q1" .OLEFormat.Object.ListFillRange = "M1:M8" End With
I have created a userform with several comboxes in which the user can select a value which is in the worksheetrange a1:a70. Now what I want to do is, when the user selects a value I want a textbos to be filled with the value out of the cell next to it. (if user selects a5 I want the textbox to be filled with the value in b5)
I've several values which you may be wanting toknow
There are two Combo boxes in the form. ComboBox1 is being populated from a named range - "ParticipantName". (Located in Sheet1!C2:C500) ComboBox2 has been populated with "No" and "Yes" with additem in Form1 Initialize.
There are 3 (Three) Command Buttons - "Save", "Cancel" and "Close".
"Cancel" shall clear data in both Combo Boxes. It is done. "Close" shall unload the Form. It is also done.
My problem is with the "Save" button. The user will select a name in the ComboBox1 and Select "Yes" or "No" in ComboBox2. Then if the user press "Save"; only the selected data of ComboBox2 will be written in the 26th Column (Column "Z") of Sheet1 in respective Row of the name selected in the ComboBox1.
I need to link the textboxes of a form to the appropriate cells associated to the selection made by a combobox. And in the process I need to be able to Edit one of those Textboxes on the fly while the rest will be locked to the user.
Not sure if the editing of the Notes section can be real time of if it must be updated through a button.
In this file, I have a Work Summary worksheet in which I'm extracting some data from the other worksheets to "summarize" all jobs into one nice work summary log On Basis of Average of data from 3 other different sheets A,B,C
The following form works great to if onyl formula calling is applied
