There is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.
I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
I am creating a Userform and one of the elements on it is a combobox where the user has to select their name. On the same Userform, I want to have a textbox (or listbox or another combo box if necessary) which will show the users default cost centre based on the initial combobox selection. I've tried doing this various ways, but I can't get the textbox to update when the combobox selection changes.
I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code: Private Sub UserForm_Initialize() Sheets("Sheet3").Activate Dim ColARange As Range
I am trying to insert information from a combobox into a textbox. The issue I have is that the information in the combobox is generated by accessing a network folder and filling the combobox with the names of the various folders. The combobox only generates the first seven digits of the folder...
Private Sub combobox1_DropButtonClick() Call ShowFolderInfo("j:Consultant ServicesState Projects") End Sub
Sub ShowFolderInfo(folderspec) Dim index As Object Dim fs As FileSystemObject Dim folderObject As Folder Dim SubFolders As Folders.......................
I want to select a customer name from a ComboBox in a UserForm and populate a TextBox with additional customer information for the end user. The additional customer information is always located in C3 in sheet2 (the result of a formula). However, the text box only refreshes when I click into it. Is it possible to have it refresh without clicking into the userform textbox)? I’ve tried _Change and _Afterupdate. I'm sure this must be easy for anyone but a novice like myself. Sample attached (play marco...button dead?).
Private Sub ComboBox1_Initialize() Me.TextBox1.Text = "" End Sub Private Sub ComboBox1_Afterupdate() Me.TextBox1.Text = Worksheets("Sheet2").Range("C3").Value End Sub
I have a userform with text boxes and a combobox referencing a named range in the spreadsheet. What I'm trying to accomplish is when I click on a name in the combobox, I would like the text I'm adding to this name to be on the same row. Currently a new row is created with all this information instead of being added to the existing row and I end up with duplicate names in the combobox.
I've created a macro that searches the active worksheet for a textboxvalue and copies all full and partial matches to a multicolumn listbox. However, I'd like to install some sort of filter that prevents registrations not containing the value in a combobox from making it into the listbox (so I'd actually like to search for registrations meeting two criteria, i.e. an advanced search). The macro I'm using is:
Private Sub Query_Change()
Dim vFound As Range Dim strFirstAddress As String
On Error Goto ErrorHandle
Set vFound = Cells.Find(What:=Query.value, After:=Cells(1, 10), _ LookIn:=xlFormulas, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False) If Not vFound Is Nothing Then strFirstAddress = vFound.Address
I've attached the workbook I'm working on, in case I haven't made myself sufficiently clear in the above.
I have a problem involving two combo boxes in a user form.
I need to populate different “lists” to combo 2, based on a selection in combo 1.
I browsed through the forum but could not find any solution that made sense to me.
Here are the specifics: Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).
This list is loaded as part of the form initialization.
If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).
I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.
can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
I know there are a lot of hide row threads... i've searched for ages... but (unfortunately) i can't a solution that addresses my problem and I'm stuck. Please help!
I have a data between rows 10 and 1310 and I would like to use a combo box option to select and view certain rows of data only. I don't want to use auto filter because i have a separate macro using an auto filter on the same data - they won't play together.
So in short - combo box will contain values from column A. When value is selected from combo box hide all non matching rows based on column A values.
So i have added a combo box to sheet1 and populated it with the following workbook code...
Sub Workbook_Open() With Sheets("Sheet1").ComboBox1 .AddItem "Select Product Type" .AddItem "Apples" .AddItem "Mangoes" .AddItem "Oranges" .AddItem "Clothes pegs"........
My table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
I have set up UserForm1 with TextBox1 and ListBox1 controls. What I am trying to do is open the UserForm, type in a Batch Number in the textbox and fill the listbox with the Forename Surname and RefNumber associated with the batch number.
I'm trying to do some userform development with multiple dependent comboboxes, but I am having trouble populating the third and last combobox. First, I populate the 1st combobox on the userform initialization. I can get the first 2 comboboxes to populate correctly, but I can't seem to get the 3rd combobox to populate correctly.
The 3rd combobox takes the selection from the 2nd combobox and searches column "A" in the worksheet "Chassis Specs" and populates the 3rd combobox with data from column "B", there will be repeat items in column "A", but all those occurances should populate the 3rd combobox with the data from "B".
I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...
I am working on a spreadsheet for a client. I am using Excel 2007 and she is using Excel 2000. I have created a emplate for her to enter survey data into. Using the following code, I have created combo boxes for the drop-down menus so the client can tab from one cell to the next while entering data:
Option Explicit Private Sub TempCombo_KeyDown(ByVal _ KeyCode As MSForms.ReturnInteger, _ ByVal Shift As Integer) 'Hide combo box and move to next cell on Enter and Tab Select Case KeyCode Case 9 ActiveCell.Offset(0, 1).Activate Case 13 ActiveCell.Offset(1, 0).Activate Case Else 'do nothing End Select End Sub.....................
Basically, I need the textbox to look at spreadsheet 1 and count the number of times a name occurs in a column given a certain week.
ComboBox3 has the name in it,ComboBox4 has week number
So when I press CommandButton1, the script will look at the week, find all instances in that week, rows, look at the name, then count the number of times the name comes up that week. and return that number to TextBox1.