I am creating a Userform and one of the elements on it is a combobox where the user has to select their name. On the same Userform, I want to have a textbox (or listbox or another combo box if necessary) which will show the users default cost centre based on the initial combobox selection. I've tried doing this various ways, but I can't get the textbox to update when the combobox selection changes.
View 7 RepliesI have a problem involving two combo boxes in a user form.
I need to populate different “lists” to combo 2, based on a selection in combo 1.
I browsed through the forum but could not find any solution that made sense to me.
Here are the specifics:
Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).
This list is loaded as part of the form initialization.
If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).
I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.
I'm trying to do some userform development with multiple dependent comboboxes, but I am having trouble populating the third and last combobox. First, I populate the 1st combobox on the userform initialization. I can get the first 2 comboboxes to populate correctly, but I can't seem to get the 3rd combobox to populate correctly.
The 3rd combobox takes the selection from the 2nd combobox and searches column "A" in the worksheet "Chassis Specs" and populates the 3rd combobox with data from column "B", there will be repeat items in column "A", but all those occurances should populate the 3rd combobox with the data from "B".
I am attaching my whole workbook.
Chassis Specs Info_Build_REV B.xlsm
I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.
Currently I have something like this:
[Code] ......
But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.
On a sheet named "Matrix" I have rows of data in columns A, B, and C. I have the following code in a ComboBox that will show names from column B of the Matrix sheet.
View 3 Replies View RelatedThere is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.
View 4 Replies View RelatedError Help.xls. An example is attached. If you open the attachment, you can see that I'd like to choose a date from the combobox and have the corresponding "date code" (that's what I'm calling it - it's for a different, more complex purpose) appear in the text box. For this to happen, I'm using the following
View 2 Replies View RelatedI created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.
Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range
[Code].....
Attached is my sample data.
In sheet "support data" I have two columns.
One column is a client reference and the one next to it is a client name.
On my form the combo box is populated with the client references.
When i select a reference in the combo box I would like to populate textbox1 with the corresponding client name from "support data"
(as an advanced feature it would be good if the textbox1 kept changing as the mouse was hovering over the list of client references in the combobox)
I want to select a customer name from a ComboBox in a UserForm and populate a TextBox with additional customer information for the end user. The additional customer information is always located in C3 in sheet2 (the result of a formula). However, the text box only refreshes when I click into it. Is it possible to have it refresh without clicking into the userform textbox)? I’ve tried _Change and _Afterupdate. I'm sure this must be easy for anyone but a novice like myself. Sample attached (play marco...button dead?).
Private Sub ComboBox1_Initialize()
Me.TextBox1.Text = ""
End Sub
Private Sub ComboBox1_Afterupdate()
Me.TextBox1.Text = Worksheets("Sheet2").Range("C3").Value
End Sub
I am trying to create a sheet for identifying work hazards based on the job assigned. So what I have set up is a drop down list to select the job type. Once this job type is selected I want the pre written hazards to autopopulate in the hazard box. I would also like the required PPE to appear in the PPE box for the job selected.
I have 6 different choices in the drop down list. For each choice I have the hazards and PPE in a separate sheets in the worksheet.
Is there a way to get this information to autopopulate?
I need help to create a formula that would grab data from one sheet and populate another sheet based on the employee that is selected from a drop down list.
Attached is a draft of what I am looking to do.
Basically this would allow us to enter employee variances from several employees on one sheet and get a detailed break down of their history on another sheet.
There's a table with all the raw data in it
camp name
session name
to put in the correct format I am thinking of usinf drop down boxes so that the user can selct the camp name from drop down and based on that the session name can be populated and alos the rest of infomration of that accput in to the specified fields
I have a table, headers "FirstName" and "SurName".
Further a Userform with 2 Comboboxes "FirstName" and "SurName"
I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.
Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.
I would like to do is have 2 listboxes. In the first listbox I would like the name of all the worksheets which contain the words "elective class: " in cell C7.
In the second listbox I would like the name of all the worksheets which do not contain the words "elective class: " in C7. I need this only to source from worksheet 7 onwards however.
The listboxes are called ListBox1 and ListBox2 respectively.
Also I am using this to print and I have a button which currently selects all the data in the first listbox and another button which prints all the selected data. The code being used for this is:
In my spreadsheet, the user clicks on a button which shows a userform. On the userform, there is a list of checkboxes and several radio buttons from which to choose, based on the information needed to fill in a row of the spreadsheet. (Each row is snail mail addresses followed by cells that will contain either an "x" or are left blank.
The "x"'ed cells cause formulas to generate text strings that are copied & pasted into another application.)
I can't seem to locate an example of how to get checked boxes to populate a row.
I also need to be able to copy horizontal info into vertical lines to print a letter, as well as use those "x"'ed boxes to fill in the letter.
can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box
I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.
View 4 Replies View RelatedAm trying to get dynamic population of 2nd combobox based on match from criteria in combobox 1.
if column a = bears and column b = colours of bears then
when I select bears in combobox one, combobox 2 would populate with colors of bear.
I am think of having a combobox 1 change event that evaluates each row in a specific range (does it match the criteria?) if so, then add 2nd cell (column b) of that row to the combobox 2.
I know it would probably involve match and offset, add item and loop, but I am not sure what the syntax is.
My table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.
I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.
I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.
For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.
What I'd like to do is fill specific cells with specific information drawn from other pages based on a combo box selection.
For example, if I were to pick 10131 in the combo box, I'd like it to fill out cells X, Y and Z with information from the three cells to the right of 10131. Assume X, Y and Z are not touching.
I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.
View 4 Replies View RelatedI know there are a lot of hide row threads... i've searched for ages... but (unfortunately) i can't a solution that addresses my problem and I'm stuck. Please help!
I have a data between rows 10 and 1310 and I would like to use a combo box option to select and view certain rows of data only. I don't want to use auto filter because i have a separate macro using an auto filter on the same data - they won't play together.
So in short - combo box will contain values from column A. When value is selected from combo box hide all non matching rows based on column A values.
So i have added a combo box to sheet1 and populated it with the following workbook code...
Sub Workbook_Open()
With Sheets("Sheet1").ComboBox1
.AddItem "Select Product Type"
.AddItem "Apples"
.AddItem "Mangoes"
.AddItem "Oranges"
.AddItem "Clothes pegs"........
My table contains 6 columns, one of which is 'season'.
I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.
I realise this is a very remedial question but i am very new to VBA and programming in general!
I have filled up my ComboBox1 with the sheets I want to add information to. My problem now is how to place the info in the correct sheet when I click CommandButton1.
I've been working on this for a few hours now. I got this to work on the first code I found but it didn't work afterward. I just deleted the whole thing and started again.
open attached file: For example, if I click "show matching lists" button and select from combobox st8 / b1 / b4. I need in cell K2: 3472.9 and in cell L2: 3472.9.
View 2 Replies View RelatedI have a userform that has a "payment type" combo box
This box consists of:
I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.
I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...
I am working on a spreadsheet for a client. I am using Excel 2007 and she is using Excel 2000. I have created a emplate for her to enter survey data into. Using the following code, I have created combo boxes for the drop-down menus so the client can tab from one cell to the next while entering data:
Option Explicit
Private Sub TempCombo_KeyDown(ByVal _
KeyCode As MSForms.ReturnInteger, _
ByVal Shift As Integer)
'Hide combo box and move to next cell on Enter and Tab
Select Case KeyCode
Case 9
ActiveCell.Offset(0, 1).Activate
Case 13
ActiveCell.Offset(1, 0).Activate
Case Else
'do nothing
End Select
End Sub.....................
I have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.
Excel 1.xls