Is possible show the "real" Excel's Progress Bar on a External Form?
I send some commands to Excel.
Some are slow and Excel's progress bar run.
But, before, i hide (Application.Visible = False) Excel, then i need to show on my form that progress bar.
Or if i can get value from that progressbar should be useful too.
As i have a pretty "complex" macro, which takes around 20-30 minutes to do (honestly)....
I was wondering if there was a way to create a progress bar just showing me how many % it has done so for?
Or even tell me which sub routine it is up to? (but % would probably be better)
And preferably a pop-up box one?.. not one on the status bar because i have stuff updated on the status bar already...
I am trying to make a Progress bar with a statment using a Userform with a label saying Please wait. I call the form using UserForm1.Show vbModeless.The form shows and functions as needed but the label with the caption please wait is not visible. how to get the label to show?
View 1 Replies View RelatedI would like to know how to input 10% 25% ect then in another cell the graph bar growing till 100% mark is completed.
View 6 Replies View RelatedHow to show progress bar for both percentage completion and time left.
The code below is already created with percentage completion. Just to add time left.
[Code] ........
i want to know how to show the progress of code exceuted in an excel sheet. like when we download a file from web or server it shows the staus of the file transfer.
View 2 Replies View RelatedI have a VBA code that copy data from multiple files into my workbook.
I find the first file, copy the ranges I need into my workbook and continue to the next file until all files are done.
The copy operation in each file is - row by row - because I need to ask questions about each row.
As you understand - what the user sees is a flickering window because I activate the source workbbok -> copy the data -> activate this workbook-> paste the data.
I want to avoid the flickering.
An acceptable solution could be to generate a pop up message box that will say "data is being copied. Pleasd wait while operation is completed". BUT - I don't know how to identify that the action is done and message box can be closed.
is it possible to show progress indicator if macro execution take some considerable time say more than 10 seconds?
View 2 Replies View RelatedI'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
I want to use a msgbox as a progress indicator for a routine in an application. I cant figure out how to do this.
View 5 Replies View RelatedIm consolidating datas from muliple excel files to single data base excel file.Am having macro and it is working fine for me.But when am loading data to data base file the excel files are vibrating.To avoid this issue i want to Set the progress bar which should indicate the progress of the data loading.
View 12 Replies View RelatedI have an Excel VBA form to enter data into a worksheet. Last column of my worksheet CC contains a formula which calculates some input fields. It is a very long though simple formula.
Is it possible that while I am entering the data in the form, a field in the VBA form itself keeps showing me running result of the inputs made based on the formula in the worksheet column CC? I don't know how to write that long formula in VBA so want to find out if there is a way around it.
If not possible, how about while the data has been entered in the form, there is a button CHECK RESULT. Clicking this button temporarily enters the form data to spreadsheet, populating CC cell and that result shows up as message box while the VBA data form is still open. This result message box could have two buttons, CONFIRM ENTRY or CANCEL. If cancel is clicked then the data entered in the spreadsheet is deleted. If confirm is clicked, then entered data stays.
Is there a way for a form (I am using it as a warning dialog) to show for X seconds (10 or 15) and then hide or hide upon user selecting button to hide it?
I have noticed that if the user form is active then an error comes up when a script tries to run.
It's a basic data entry kinda thing, some data is entered, about 10 popup boxes pop up, in sequence of choosing different buttons that assign data to cells.... but I have a 'limbobutton', to keep the vba running, since it runs off of workbook open... and the limbobutton works fine, except after i go through the 'add data' procedure I spoke of above.... after I enter data, and get back to the main menu, then choose the 'limbobutton' for the floating button, so a user can manually edit/review the data-- and the 'limbobutton' just flashes up for a brief second, and the vba just stops, and you're at the excel sheet, like it was meant to end...
I'm wondering if there's any sort of conflict that might be occurring here... I know it sounds like I have an extra 'unload me', but I've checked, and still have yet to find something.... If anyone might have an idea how to fix this, or is there perhaps a better way then vbmodeless... I'm just looking to have a floating button that says 'Return to the main menu', so after manually entering data, or reviewing it, a user can return to the 'main menu'...
I have a list of customers and each customer has a commission value tied to it. I have a form and in it I have a cell that has a list of customers that someone can choose from a drop down list. If a certain customer is chosen I need their commission value to show up in another cell. example: How do I create a formula to show if Company A is chosen in cell G4 then the commission is 5% in cell G38 , If Company B is chosen then the commission is 8%.
View 9 Replies View RelatedI need to create a form to update employee details.
The one I created has input boxes for all the details in the form. eg. Name, ID, DOJ, Address, etc. So once you enter all the details and press enter, the details gets updated in the database.
Now, what I want is, my form should first only show input box for EmpID. Once I give the input for EmpID and press enter, the form details should now change to Name. After updating the Name, it should show input box for DOJ.
I'm getting an "Error 400 - Form already displayed; can't show modally" error from a UserForm project I've been making. It's attached below. How it *should* work:Use the button "ENTER NEW DATA" to open the UserForm. Submitting the Form should insert the data into a new row below the already filled ones. (the range of Form data starts at row 7)Click on a Non-Empty, Protected cell of Form data, and the UserForm should open, containing the data of that row within its corresponding fields. Submitting the Form should modify only that very row from which it was sourced.When you close the workbook (OzgridMST1.xls), the Form data should be copied into another workbook (on Sheet1) on the same level as OzgridMST1. (I couldn't include it in the . ZIP file since it would have been too massive... Just create a new workbook called FormDBTrial1.xls on the same level.)
Problem(s):When i fill-in and Submit the UserForm for a second time (by either the button or a Non-empty cell), the Error 400 appears and traces back to [UserForm].Show in the Sheet code. I've double-checked my code and can't see what the problem is.When i Submit the Form through the Non-empty cell, it submits into a NEW row, and not the same one! My code used to work, I've tested it many many times. I've triple-checked my code, can't figure.Finally, when I close the Workbook, an Error comes up saying it can't find FormDBTrial.xls, even when it plainly does exist on the same level, same folder, etc.
Everything worked fine until I added the "Copy To Another Workbook" functionality. Been over it and the forum so many times my head is spinning...
it is possible to add a mouse over event to this Macro so that when a user runs the mouse over the bitmap picture that this macro is assigned to it would show the value in TextBox7 for the record with the specified TextBox1 Value.
For example for the below Macro it would show the Value of TextBox7 for the record that matches "103" in TextBox1
I have searched the Forum as well as a few different VBA books and can not find much on Mouse Over events
Sub crkt_id_103()
Load frmMain
frmMain.TextBox1 = "103"
frmMain.Show
End Sub
I have a TextBox and 2 Commandbuttons. I need the cursor to return to the TextBox when the Userform is loaded without the user selecting the TextBox.
View 3 Replies View RelatedIs it possible to show a table in a user form? For example I have a table that is 4 columns wide and 5 rows deep with lines seperating both. I have tried using a text box and list box to achieve the results I am looking for but can't figure out how to add lines to seperate data between rows and columns.
View 5 Replies View RelatedI attached an excel that I created. But I have one problem with it.
View 4 Replies View Relatedi have this code which askes the user for a job number once the workbook is opened.
Private Sub Workbook_open()
' If sheet was named by original open routine, exit
If ActiveSheet.Name = "Main Roof" Then Exit Sub
' otherwise
Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")
' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub
' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.
what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.
I have set up a simple form in excel, whereby people use drop down menus to select the appropriate information (as all data inputted needs to be entered in exactly the same way to allow sorting, counting etc) so I thought drop downs were best. The trouble is the data is carried through to my excel database (on another worksheet) were it is shown in numeric values dependant on how far down the drop down list the select item appears (ie "Fareham" is third on the list, so shows in the database as "3").
I'd very much like my database to be easier to read and actually show Fareham etc, rather than be populated with lots of numbers. I initially tried using IF function (ie =IF(C3=3,"Fareham") but unfortunately two of my drop down lists are too long for this (with 25 and 33 entries respectively).
I would like to have a progress bar in some of my userforms.
As an example I attach a sample. progress bar.xlsm
Im forgetting how to code something for this ....
View 7 Replies View RelatedI'm trying to come up with an efficient formulae or function to calculate tax
The problem I have is that the tax is progressive. As below
the first 20,000 is taxed at 5%
the next 20,000 is taxed at 6%
the next 20,000 is taxed at 7%
the next 20,000 is taxed at 8%
the next 20,000 is taxed at 9%
more than 100,000 is taxed at 10%
I'm trying to do a formula like below
Cell B3 is my taxable amount
Cell B5 =IF(B$3>20000,20000*0.05,B$3*0.05)
Cell B6 =IF(B$3>40000,40000*0.05,(B$3-20000)*0.05)
This gives me a problem in that for 35k say, I end up with a negative number for the second part in cell B6. My other issue is that each calculation will take up 6 rows on my
spreadsheet. I was hoping to set up a function that could do this in a cell, but even the simple stage defeats me at the moment.
I struggling in progress bar code, Once userForm.show code executes code execution stops, Once if i close the userform at runtime step wise code continues from next line in this case i mean UserForm.ProgressBar1.Min = 0
Sub test()
UserForm.Show
UserForm.ProgressBar1.Min = 0
UserForm.ProgressBar1.Max = 100
[Code]....
There is a nice progress bar at
http://www.dailydoseofexcel.com/arch...-and-controls/
Sub DoStuff()
Dim ufUpdate As UUpdate
Dim dtTime As Date
'instantiate the userform
Set ufUpdate = New UUpdate
ufUpdate.lbxStatus.AddItem "Starting Process..."
ufUpdate.lbxStatus.AddItem "Do the next thing..."
ufUpdate.lbxStatus.AddItem "Done!"
ufUpdate.Show....................
I have a code that has a loop with up to 100,000 possible iterations. The max number of iterations, N, is variable and to be specified by the user via user form.
That's why I like to show only incremental progress , say 5% competed , 10% completed ,... , so on. What is the best way to code it?
Another question: I tried to show it via
Application.StatusBar = Format(PctDone, "#.##%") & " completed"
but for some reason it does not get updated while the code is running. Is that because the user form is visible? For now, I'm trying to add a label progress bar to the user form, but StatusBar would suffice.
I'm using a mostly recorded macro to do some rather lengthy formatting in a workbook. The formatting is lengthy enough that I don't want people to think the PC is hung. So I'd like to use the progress bar. I'm trying to trim the code down to just the bare essentials for running the progress bar during the macro procedure (and so I can better understand what's happening in the code). The attachment shows what I've done so far. When I press the "Format Workbook" button then I have to press another button ("Run Progress Meter") to really launch the progress bar.
View 5 Replies View Related