Set Focus To Text Box Upon User Form Show

Sep 22, 2007

I have a TextBox and 2 Commandbuttons. I need the cursor to return to the TextBox when the Userform is loaded without the user selecting the TextBox.

View 3 Replies


ADVERTISEMENT

Finding Out Which Box On A User Form Has Focus

Feb 13, 2009

Need the way of getting the name of the text box that currently has focus on a user form?

View 5 Replies View Related

Cell Focus When Opening A User Form

May 9, 2007

i would like to retain the focus of the current cell before the user clicks on a button to run a macro (see below) to open a userform...?

userform.show

(the cell focus seems to disapper...after the button is clicked, but does stay on the cell when i run the macro from tools macros...)

View 5 Replies View Related

Unload Or Hide User Form On Show Next Form

Dec 2, 2008

I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).

All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.

Private Sub cmdContinueType_Click()

ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select

Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True

If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If

End Sub

View 9 Replies View Related

Show User Form Value With Mouse Over Event

Jul 10, 2006

it is possible to add a mouse over event to this Macro so that when a user runs the mouse over the bitmap picture that this macro is assigned to it would show the value in TextBox7 for the record with the specified TextBox1 Value.

For example for the below Macro it would show the Value of TextBox7 for the record that matches "103" in TextBox1

I have searched the Forum as well as a few different VBA books and can not find much on Mouse Over events

Sub crkt_id_103()
Load frmMain
frmMain.TextBox1 = "103"
frmMain.Show
End Sub

View 9 Replies View Related

Show Table With Grid Lines In A User Form

Aug 11, 2009

Is it possible to show a table in a user form? For example I have a table that is 4 columns wide and 5 rows deep with lines seperating both. I have tried using a text box and list box to achieve the results I am looking for but can't figure out how to add lines to seperate data between rows and columns.

View 5 Replies View Related

Show User Form After Workbook_open Code Has Executed

Apr 19, 2006

i have this code which askes the user for a job number once the workbook is opened.

Private Sub Workbook_open()

' If sheet was named by original open routine, exit

If ActiveSheet.Name = "Main Roof" Then Exit Sub

' otherwise

Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")

' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub


' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.

what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.

View 3 Replies View Related

Rotate Text On A User Form

Nov 6, 2006

how to rotate a label to a 45 degree angle on a user form.

View 9 Replies View Related

Text Box To Keep Value After Close Of User Form

May 10, 2007

How do I define the variable in a text box so that it stays in that text box after the close of the dialog box. For example, I enter "Test" in TextBox1 then close UserForm1. I want to be able to open UserForm1 back up and still have the same user defined text in there.

View 9 Replies View Related

Multiple Text Box References From A User Form

Jun 12, 2008

I recently created a userform. I want the data to be placed into the leftheader, centerheader, and rightheader of the document after the user fills in the required fields. I have made the userform, and I can make the code for it to place one item on my userform in the left, center, or right headers. However, when I try to place more than one item in any of the headers excel deletes the first item and overwrites it with the item that is listed last in the VBA code for that respective header. I am new to VBA (this is actually my first program) so I do not know how to make the first value stay there and simply have the next value placed on the line below it.

View 13 Replies View Related

Detect Duplicates In User Form Text Boxes

Jun 13, 2009

I have a user form with 4 text boxes and a command button. I have no problem looping through the textboxes to retrieve the value, but what is the best way to detect if any duplicates exist between the four text boxes? For example, in the command button's
If textbox one's value is "test" and textbox four's value is also "test", it should throw an exception. If a question like this has already been answered, a link to that post would surely suffice.

View 2 Replies View Related

User Form Basics - Populating Text Boxes

Sep 23, 2009

I am trying to create a user form to edit some named ranges. The VBA user form designer is basically the same as Borland Delphi, so building the form itself was easy. What I can't figure out is how to populate the user form with the data from the spreadsheet.

I have a number of text boxes on the form with names like txtTier1Slots, txtTier1Ceiling, txtTier1Floor, etc up to 4.

I have a defined name that corresponds with each item, Tier1Slots, Tier1Ceiling, Tier1Floor, and so on. I'm using defined names because they're referenced in Conditional Formatting on one of the worksheets in my project. They don't exist as actual cells, just name references.

I want to get the form populated with those values. I've tried about twenty variations of the following code, using ThisWorkbook, Workbooks, Cells, Range, Name, and just about every cell reference method I can think of. I've so many different error messages, my head is spinning.

View 6 Replies View Related

User Form Frames Hindering Textbox Text

Oct 21, 2009

I have a question regarding frames and textboxes on a user form.

I have a user form that has a number of textboxes populated from the results two Comboboxes.

I decided to group some of the textboxes in frames for more logical viewing.
I grouped the textboxes, moved them, placed two frame controls on the form then, finished by replacing the grouped textboxes. No code was altered or added.

When I ran the form, only the Comboboxes were functional and the text boxes were blank.

There were no runtime errors or compile problems.

View 5 Replies View Related

Text Field Visible Property On User Form

Jan 22, 2010

I have a text field at the bottom of a user form that remains hidden (i.e. visible = false) until the user clicks the "Ok" button. At that point, I want the text field to appear as the macro is running (it's a large macro, so the text field just says "processing, please wait...").

The first line of my macro is:

View 2 Replies View Related

Percentage Formats In User Form Text Boxes

May 1, 2008

I have a user form which includes some text boxes (txtRUL.text for example) where I want to enter a number as a percentage. I divide the number entered by 100 to avoid Excel automatically multiplying by 100 and the result is displayed in the user form as the correct percentage.

Private Sub txtRUL_AfterUpdate()
EnableSave
txtRUL.Value = Format(txtRUL.Value / 100, "0.0%")

(I'm sorry I cant figure out how to format this code as code in this post)

This works well, trouble is when I save and it writes the results to the worksheet, the numbers in the user form revert back to plain unformatted non percentage numbers (ie 5% goes to 0.05)

View 9 Replies View Related

Setting Date Format For A Text Box In A User Form

Dec 15, 2009

I've been struggling with this for a while now and can't believe how hard it is!. I've searched on this site and on others to get some clarification but to no avail.

It's pretty simple really. I have a user form which contains a tex box for a user to input the date I want the format to be dd/mm/yyyy but can't find out how to set the format of the text box to this.

View 9 Replies View Related

Remove Focus From Form.?

Dec 9, 2008

I have an active form that is always in focus. I would like to be able to seamlessly transition back to the worksheets under it, and move back and forth between the worksheet entry and form entry. Is there some way to alter the focus between events to do so (like a mouse over type event)? Currently, I can only exit the form to get back to the worksheet. excel 03 sp3

View 2 Replies View Related

Set Focus Back To Workbook While Form Is Active

Nov 11, 2009

I have a userform, when using the form it has focus, once I click on my "Ok" command button I want to return focus to the workbook while I leave the userform open. I already have the userform open and on top of the workbook.

View 2 Replies View Related

Return Focus To Workbook/worksheet After Updating Form

Jul 24, 2009

I have a form that displays when i open a workbook. I enter data into the form's fields (listbox & textbox). When I click the form's "OK" button, the focus doesn't return to the current worksheet, and in fact, focus doesn't return to any of the open windows / applications I have open.

View 9 Replies View Related

Set Focus Of Cursor In TextBox On UserForm Show

May 18, 2007

I'm having some trouble setting up my Userform. It's used for someone to insert a password to open up some sheets. I have it working except for 2 problems.

First off it gets started by a sub which has a shortcut key, CTRL + W.

When it opens I would like the TextBox to be ready to be typed on... and I would like the submit button ready for Enter. So when it opens, you just type in the password really quick and press enter without using the mouse at all.

The TextBox starts on the first try, but when I press cancel and then open the UserForm up again, then the cancel command is still selected and I have to select on the textbox.

There is 3 things on this userform... TextBox1, CommandButton1, CommandButton2. All I want is for the TextBox always to show up ready for typing, and the Submit(CommandButton1) to always be ready to press enter.

View 4 Replies View Related

User Form-Easy Selection Of Data To Be Filled In The Form

Jun 3, 2006

find the attached workbook

I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:

When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.

Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.

View 7 Replies View Related

Prevent The User From Saving The Data Input From The User Form If Any Of Those Three Fields Is Left Blank

Feb 9, 2010

I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.

What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)

View 2 Replies View Related

Look Up Data And Plug Into Form - User Form In Reverse?

Jan 14, 2009

I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.

Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.

View 3 Replies View Related

Force Focus Back: Pop Up A Userform To Provide Instructions And Collect Some Additional Data From The User

Feb 18, 2009

I'm working on a spreadhseet which has several macros that can take up to 5 minutes to run. When the macro(s) complete, I pop up a userform to provide instructions and collect some additional data from the user.

The "problem" is that when the user moves to another application to do other work, the user form remains hidden behind the active app. I've added some text to the status bar to let the users know the processing is done, but they would like something more obvious - so, is there any way I can force focus back to Excel?

View 2 Replies View Related

Determine Which Text Box Has Focus

Aug 21, 2007

I am using excel VBA userform and have the following elements:

1) .textboxA
2) .textboxB
3) .commandbutton_insertdate

(clicking on this button will insert today's date into either textboxA or textbox B. I use an accelerator 'D' so user can use Alt+D to insert the date conveniently.)

My question is: How can I determine which text box (A or B) is in focus when i execute Alt+D?

My objectives are: When focus is on textboxA, and user Alt+D, today's date will be inserted into textboxA When focus is on textboxB, and user Alt+D, today's date will be inserted into textboxB

My problem is: It seems that when I use Alt+D, the focus will jump to the command button instead, so none of the text box are in focus!

View 6 Replies View Related

Prevent Text Box Loosing Focus

Sep 5, 2007

I want to type some data into a text box on a form, after I press enter I want to do sothing with the data (add it to a list box, no problem) and then go back to the textbox for another entry.

Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Call processdata
End Sub

Sub processdata()

A = TextBox1.Value
' Do something with A
TextBox1 = ""
TextBox1.SetFocus

End Sub

I can do somthing with the data but it does not jump back to the Textbox i.e. the setfocus does not work.

View 4 Replies View Related

User Forms- Create A User Form That Will "pop Up"

Oct 25, 2007

I have a spreadsheet with the following headings:

A
Claims Number

B
Name

C
Scheme

D
Admin

E
Date

I need to create a user form that will "pop up" and ask the administrator to enter the above details.

A - should be created automatically (ie last claim number + 1)
B - user enters manually
C - data retrieved from a list
D - data retrieved from a list
E - date is the date the information is entered

View 9 Replies View Related

User Form

Feb 24, 2009

I have a user form that I want to take the information and have it input on the worksheet. I want it to start at A3 and check to see if that cell is "" and if it is not then enter the data from the from horizontally. If A3 is not "" then continue down column A untill the first nonblank cell is and then select that cell and have the data entered horizontally.

I have this code so far but it is not working.

Private Sub cmdSubmit_Click()
Dim Month As Variant

Month = Me.cmbMonth.Value

ActiveWorkbook.Sheets(Month).Activate

I have done a bit of excel programming last year but have not done any for the last 4 months so I am a bit rusty.

View 9 Replies View Related

Combobox In A User Form

Aug 30, 2007

I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.

Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.

View 14 Replies View Related

User Form Drop Down Box

May 25, 2008

I have a project, i want to create a user form, basically i have a work book that contains dinner menu's on column A and ingredients in column b.
I would like to create a user form that have a drop down box that would show all the possible menu's referencing my workbook sheet1 column A values. and by selecting a item, i would like to be able to show all ingredients needed, is there a way to do this?.
I hope so, it would be so cool to do this.

View 11 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved