2 Cells On A Form - Formula To Show If Then
Mar 17, 2014
I have a list of customers and each customer has a commission value tied to it. I have a form and in it I have a cell that has a list of customers that someone can choose from a drop down list. If a certain customer is chosen I need their commission value to show up in another cell. example: How do I create a formula to show if Company A is chosen in cell G4 then the commission is 5% in cell G38 , If Company B is chosen then the commission is 8%.
View 9 Replies
ADVERTISEMENT
Dec 2, 2008
I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).
All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.
Private Sub cmdContinueType_Click()
ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select
Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True
If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If
End Sub
View 9 Replies
View Related
Dec 10, 2013
I have a formula which looks in a folder for a file and returns the cell I want from that folder and work book
='H:NCHOCall CentreCall Centre ResourcingStats[NHC_Telephony_Daily_2012-11-27.xls]NHC Daily'!$E$55
as you can see I have a date in the middle, I want it to reference to a cell with a date in and return the information from that document with the change in date. So all I have to do is drag the formula down and it will return the info i want out of each report.I think it might be an add on that I need to download?
View 1 Replies
View Related
Jun 4, 2014
Im trying to add Cells K2,L2,M2,N2,O2
For instance Column K2 could have the number "2" in it, but in K3 it might be blank.
L2 could have the number 3 in it, but be blak in L3.
M2 could have 50 in it or could be blank.
What I want for P2 to say is 2&3, if the cells in K2 and L2 show the 2 and 3. If it has the 50 in M2 thought, I want it show it.
View 3 Replies
View Related
Jun 8, 2014
For example: C4=5,C5=18, and C6=7.
I want A1 to show 4,5,18,7 (the values of cells C4 to C6).
I believe I have done this before, about 10+ years ago.
View 4 Replies
View Related
Sep 30, 2009
How can I create a formula to add up how many cells in a column show a particular set of text? For instance; the column in my spreadsheet looks something like this:
MJR
DML
MJR
RJG
RJG
MJR
DML
I want to know how I can create a formula that will automatically tell me how many times "MJR" is listed; how many times "DML" is listed, and so on.
View 2 Replies
View Related
Dec 31, 2006
i am having trouble putting together an IF Formula together with and/or. i need to do the following
if cells k8 and l8 and r8 are empty, then no data should show.
if cells k8 and l8 and r8 is zero, then show zero.
otherwise add all three cells.
i thought i should use if(and... that is all 3 cells must be empty or zero.
=IF(OR(ISBLANK(K8),ISBLANK(L8),ISBLANK(R8)), "no data", IF(OR(K8=0, L8=0, R8=0),"ZERO", K8+L8+R8))
i have tried if(and) and if(or) and no matter what i have tried it doesnt work
View 4 Replies
View Related
Dec 21, 2012
I have an Excel VBA form to enter data into a worksheet. Last column of my worksheet CC contains a formula which calculates some input fields. It is a very long though simple formula.
Is it possible that while I am entering the data in the form, a field in the VBA form itself keeps showing me running result of the inputs made based on the formula in the worksheet column CC? I don't know how to write that long formula in VBA so want to find out if there is a way around it.
If not possible, how about while the data has been entered in the form, there is a button CHECK RESULT. Clicking this button temporarily enters the form data to spreadsheet, populating CC cell and that result shows up as message box while the VBA data form is still open. This result message box could have two buttons, CONFIRM ENTRY or CANCEL. If cancel is clicked then the data entered in the spreadsheet is deleted. If confirm is clicked, then entered data stays.
View 5 Replies
View Related
Sep 7, 2006
Is there a way for a form (I am using it as a warning dialog) to show for X seconds (10 or 15) and then hide or hide upon user selecting button to hide it?
I have noticed that if the user form is active then an error comes up when a script tries to run.
View 8 Replies
View Related
Apr 9, 2007
It's a basic data entry kinda thing, some data is entered, about 10 popup boxes pop up, in sequence of choosing different buttons that assign data to cells.... but I have a 'limbobutton', to keep the vba running, since it runs off of workbook open... and the limbobutton works fine, except after i go through the 'add data' procedure I spoke of above.... after I enter data, and get back to the main menu, then choose the 'limbobutton' for the floating button, so a user can manually edit/review the data-- and the 'limbobutton' just flashes up for a brief second, and the vba just stops, and you're at the excel sheet, like it was meant to end...
I'm wondering if there's any sort of conflict that might be occurring here... I know it sounds like I have an extra 'unload me', but I've checked, and still have yet to find something.... If anyone might have an idea how to fix this, or is there perhaps a better way then vbmodeless... I'm just looking to have a floating button that says 'Return to the main menu', so after manually entering data, or reviewing it, a user can return to the 'main menu'...
View 5 Replies
View Related
Aug 13, 2008
I need to create a form to update employee details.
The one I created has input boxes for all the details in the form. eg. Name, ID, DOJ, Address, etc. So once you enter all the details and press enter, the details gets updated in the database.
Now, what I want is, my form should first only show input box for EmpID. Once I give the input for EmpID and press enter, the form details should now change to Name. After updating the Name, it should show input box for DOJ.
View 13 Replies
View Related
Aug 5, 2009
Is possible show the "real" Excel's Progress Bar on a External Form?
I send some commands to Excel.
Some are slow and Excel's progress bar run.
But, before, i hide (Application.Visible = False) Excel, then i need to show on my form that progress bar.
Or if i can get value from that progressbar should be useful too.
View 9 Replies
View Related
Nov 16, 2006
I'm getting an "Error 400 - Form already displayed; can't show modally" error from a UserForm project I've been making. It's attached below. How it *should* work:Use the button "ENTER NEW DATA" to open the UserForm. Submitting the Form should insert the data into a new row below the already filled ones. (the range of Form data starts at row 7)Click on a Non-Empty, Protected cell of Form data, and the UserForm should open, containing the data of that row within its corresponding fields. Submitting the Form should modify only that very row from which it was sourced.When you close the workbook (OzgridMST1.xls), the Form data should be copied into another workbook (on Sheet1) on the same level as OzgridMST1. (I couldn't include it in the . ZIP file since it would have been too massive... Just create a new workbook called FormDBTrial1.xls on the same level.)
Problem(s):When i fill-in and Submit the UserForm for a second time (by either the button or a Non-empty cell), the Error 400 appears and traces back to [UserForm].Show in the Sheet code. I've double-checked my code and can't see what the problem is.When i Submit the Form through the Non-empty cell, it submits into a NEW row, and not the same one! My code used to work, I've tested it many many times. I've triple-checked my code, can't figure.Finally, when I close the Workbook, an Error comes up saying it can't find FormDBTrial.xls, even when it plainly does exist on the same level, same folder, etc.
Everything worked fine until I added the "Copy To Another Workbook" functionality. Been over it and the forum so many times my head is spinning...
View 4 Replies
View Related
Jul 10, 2006
it is possible to add a mouse over event to this Macro so that when a user runs the mouse over the bitmap picture that this macro is assigned to it would show the value in TextBox7 for the record with the specified TextBox1 Value.
For example for the below Macro it would show the Value of TextBox7 for the record that matches "103" in TextBox1
I have searched the Forum as well as a few different VBA books and can not find much on Mouse Over events
Sub crkt_id_103()
Load frmMain
frmMain.TextBox1 = "103"
frmMain.Show
End Sub
View 9 Replies
View Related
Sep 22, 2007
I have a TextBox and 2 Commandbuttons. I need the cursor to return to the TextBox when the Userform is loaded without the user selecting the TextBox.
View 3 Replies
View Related
Aug 11, 2009
Is it possible to show a table in a user form? For example I have a table that is 4 columns wide and 5 rows deep with lines seperating both. I have tried using a text box and list box to achieve the results I am looking for but can't figure out how to add lines to seperate data between rows and columns.
View 5 Replies
View Related
Aug 18, 2009
I attached an excel that I created. But I have one problem with it.
View 4 Replies
View Related
Apr 19, 2006
i have this code which askes the user for a job number once the workbook is opened.
Private Sub Workbook_open()
' If sheet was named by original open routine, exit
If ActiveSheet.Name = "Main Roof" Then Exit Sub
' otherwise
Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")
' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub
' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.
what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.
View 3 Replies
View Related
Aug 5, 2009
I have set up a simple form in excel, whereby people use drop down menus to select the appropriate information (as all data inputted needs to be entered in exactly the same way to allow sorting, counting etc) so I thought drop downs were best. The trouble is the data is carried through to my excel database (on another worksheet) were it is shown in numeric values dependant on how far down the drop down list the select item appears (ie "Fareham" is third on the list, so shows in the database as "3").
I'd very much like my database to be easier to read and actually show Fareham etc, rather than be populated with lots of numbers. I initially tried using IF function (ie =IF(C3=3,"Fareham") but unfortunately two of my drop down lists are too long for this (with 25 and 33 entries respectively).
View 4 Replies
View Related
Aug 13, 2009
1. I want to highlight cells on a form so that a user knows which cells to fill out.
2. When they print the form I do not want the cell shading to print.
View 2 Replies
View Related
Nov 11, 2013
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies
View Related
Nov 21, 2008
I am referring to the post made by NBVC at http://www.excelforum.com/excel-gene...xcel-help.html, Try: =IF($A1="",INDIRECT("A"&ROW()-ROW($A$2)+COLUMN(B1)),"") in B2, copied across and down
I have a similar case but there are no empty rows between lists, what would be the formula to get the same results? (The transposed address should appear next to each first line of each block).
Earlier, I posted at http://www.excelforum.com/excel-gene...-one-cell.html and I got brilliant answers, I also would like to get benefit of the above mentioned formula but in cases when there are no empty rows between lists.
View 4 Replies
View Related
Jan 12, 2010
Is it possible to create a user form and dock it in the formula bar position? for example. unhide the formula bar and position the user form (with some gui controls ) in the formula bar position?
I have a custom application in Excel that needs to have its own formula bar. so far, I didn't find a way to achieve this .. )
View 9 Replies
View Related
Sep 8, 2009
I have 2 different formulas that I need changed in a similar way.
The first formula is for cell AV11:
=SUM(BI11,BP11,BW11,CD11,CK11,CR11,CY11,DF11,DM11,DT11,EA11)+10
Every cell starts off blank.
What I need is for cell AV11 to always start off blank until data is entered into one of the other cells. The problem is that since the sum always needs to be +10 only when data is entered in the other cells, I don't know how to keep 10 from showing in cell AV11 when no data is typed in the other cells.
The other formula is for cell CO39:
=(CU8)+3
I pretty much need the same thing. If no data is entered in cell CU8, then I do not want cell CO39 to show the 3.
View 9 Replies
View Related
Nov 8, 2008
Excel 2003
right now I have an Average formula on a worksheet and I pull that value to a user form with this:
View 2 Replies
View Related
Jan 14, 2014
does such a formula exist? I regularly Change a formula in cell C1. To Show my working I would like to have The formula from C1 written next to it as an equation.
Example: B1 | C1
=Text"updated from formula in C1 automatically" | =x+y*A2
Summarised, is there a formula to Display the formula written in another cell?
View 2 Replies
View Related
Jan 15, 2010
I have a VBA form that I would like to assign to a cell, but it's a merged cell. When I do this, the form does not run. If I assign it to a single cell, it runs fine. Is there a trick to tell the macro that the target address is a merged cell?
View 2 Replies
View Related
Oct 15, 2013
I have compiled the following code with bits from here there and everywhere to clear the user entered details on a form. My problem is that I need to retain or reset to "Please Select" the cells with drop down lists.
In list form, I am trying to;
Unprotect the worksheet,
Select the cells with drop down lists and lock them,
Delete the contents of unlocked cells,
Selecting and unlocking the cells with the drop down lists ready for re-use,
Re-protect the worksheet.
(I probably should mention that my "Form" is just a formatted worksheet that looks like a form on the screen and when printed, not any sort of inbuilt Excel function that I have read about somewhere, probably here)
Code:
Sub ClearUnlockedCells()
'
' Clearform Macro
' Clear entered data from Form.
'
Dim WorkRange As Range
Dim DVRange As Range
[code].....
View 4 Replies
View Related
Mar 9, 2014
I have an excel that has dropdown column from form control, in F4 there is a formula of vlookup that take the range from A2 to B20 in consideration but the reference cell that is given to vlookup formula to pick corresponding value is E4 which is also the reference cell of dropdown box and therefore its not showing any name rather than a value, problem with the formula is that when we select any name from dropdown it does not respond to any value in F4 despite changing values in E4.
I am using these setting for the first time.
Image & excel file is attached
drop down.png
View 7 Replies
View Related
Apr 23, 2008
I would like to create a user form that will display the results from a lookup formula. The userform would have 2 textboxes, so from the formula below BZ109 would be textbox1 and CA109 textbox2. Once data is entered in these textboxes you would hit submit to return the results in a message box. What would the code be for the sumbit button?
=VLOOKUP(BZ109, INDIRECT(CA109), 11, 0)
View 9 Replies
View Related
