Show User Form Value With Mouse Over Event

Jul 10, 2006

it is possible to add a mouse over event to this Macro so that when a user runs the mouse over the bitmap picture that this macro is assigned to it would show the value in TextBox7 for the record with the specified TextBox1 Value.

For example for the below Macro it would show the Value of TextBox7 for the record that matches "103" in TextBox1

I have searched the Forum as well as a few different VBA books and can not find much on Mouse Over events


Sub crkt_id_103()
Load frmMain
frmMain.TextBox1 = "103"
frmMain.Show
End Sub

View 9 Replies


ADVERTISEMENT

Unload Or Hide User Form On Show Next Form

Dec 2, 2008

I'm using a series of user forms for data entry to a workbook, some of them open next stage user form on completion (OK cmd button).

All that is working fine, but I'd like the initial form to close on showing the next one. I've tried adding Unload and Hide commands following the frmInsertEntry.Show (Next stage form), to no avail, but I'd like this user form to close or hide at the end of the sub.

Private Sub cmdContinueType_Click()

ActiveWorkbook.Sheets("Records").Activate 'Select starting cell in record sheet
Range("N3").Select

Do
If IsEmpty(ActiveCell) = False Then ' Search for next empty cell
ActiveCell.Offset(1, 0).Select
End If
Loop Until IsEmpty(ActiveCell) = True

If optDrillType = True Then
frmDrillEntry.Show
Else
frmInsertEntry.Show
End If

End Sub

View 9 Replies View Related

User Form Event Calls

Jun 1, 2008

if you can prevent an event macro from running at will.

The problem is occuring when I have a userfrom with various controls, and the change of one control triggers an event macro that changes other controls, this then in turn triggers further control change macros.

I have tried altering the macro name to things like optionbutton1_change, select, enter etc.

The only other way around it I can think of is to introduce a binary variable, but that will mean ensuring it os always the right value and then coding an IF statement on each event macro.

Therefore, I'm thinking there must be an easier way, some kind of switch ??? Something that says ignore any event macro when the control is changed as a result of different event macro.

- I'll include a small example below just to clarify what I am talking about.

private sub optionbutton1_click()

userform1.textbox1.value = "Test Change"

end sub

private sub textbox1_change()

msgbox "Change taken place"

end sub

What I am trying to achieve is getting excel to ignore the second macro when the control is changed by another macro rather than a user entry.

View 9 Replies View Related

Set Focus To Text Box Upon User Form Show

Sep 22, 2007

I have a TextBox and 2 Commandbuttons. I need the cursor to return to the TextBox when the Userform is loaded without the user selecting the TextBox.

View 3 Replies View Related

Show Table With Grid Lines In A User Form

Aug 11, 2009

Is it possible to show a table in a user form? For example I have a table that is 4 columns wide and 5 rows deep with lines seperating both. I have tried using a text box and list box to achieve the results I am looking for but can't figure out how to add lines to seperate data between rows and columns.

View 5 Replies View Related

Show User Form After Workbook_open Code Has Executed

Apr 19, 2006

i have this code which askes the user for a job number once the workbook is opened.

Private Sub Workbook_open()

' If sheet was named by original open routine, exit

If ActiveSheet.Name = "Main Roof" Then Exit Sub

' otherwise

Do
Returnvalue = InputBox("Please Enter a New Job Number.", "Information")

' Allow changes by entering q as the Job Number
If Returnvalue = "q" Then Exit Sub


' Delete the ' from the front of the following two lines and
' then when you enter q as the Job Number you will also be
' asked for a password. The default password is toe.

what iam trying to do is get it to open the userform "WorkSelection" after it has completed the above code.

View 3 Replies View Related

VBA: Recognise Mouse Click Event?

Aug 29, 2007

I ask because I would like to change the value of a cell within A:A to TODAY() if the user right clicks on it - or with some keyboard combination.

View 9 Replies View Related

Form Picture To Zoom-in On Mouse Over

Sep 17, 2009

I'm not sure if i've dreamt this or read it somewhere and if i have read i can't remember for the life of me.

I have a picture on a form of mine and what i want is when the user hovers over the picture, the image zooms in by x percent.

View 2 Replies View Related

User Form-Easy Selection Of Data To Be Filled In The Form

Jun 3, 2006

find the attached workbook

I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:

When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.

Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.

View 7 Replies View Related

Prevent The User From Saving The Data Input From The User Form If Any Of Those Three Fields Is Left Blank

Feb 9, 2010

I have a user form that has a combo box "City" two text boxes one called "Flight" and the other "Date". What I'm trying to do is to prevent the user from saving the data input from the user form if any of those three fields is left blank. The code that I have so far checks all of the required fields, if any are left blank a message notifys which field(s) is left blank and return the focus back to that field. But the rest of code also fires.

What I really need is either to stop the code if any fields are blank and return the focus back to the blank field, the user completes the field(s) and clicks the save again, or better yet, pause the code until all the required fields are completed and then complete the save. (There is actually another 200+ lines of code in this sub, but I deleted it to keep the post a little shorter.)

View 2 Replies View Related

Show Text On Mouse Hover

Dec 14, 2006

how to get cell data / highlight the cell on which mouse hover?

View 6 Replies View Related

Look Up Data And Plug Into Form - User Form In Reverse?

Jan 14, 2009

I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.

Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.

View 3 Replies View Related

Show Chart On Mouse Hover Over Cell

Sep 16, 2006

I created 5 charts and instead of having them spread everywhere in the worksheet, I would like them to be "reduced" to some kind of a link contained in a cell (at the botom of the data of each chart). Then, I would like the chart to appear only if I put the mouse on this cell.

View 4 Replies View Related

Cell Click Event Open The Form

Apr 23, 2008

Is there a way that when a cell is clicked in a worksheet. that I can get a user form to open?

View 9 Replies View Related

Allow User To Disable Event Code

Dec 29, 2007

I have these codes in place in my excel file, there is nothing wrong with them at all. Here is the the problem : My superior runs the macros in place in the file almost daily, and when he is done he then closes it and all is well.
The macros does things to other files so they are changed in a way that the supervisors like them. I avoided putting macros in these individual files, because of the attempt to make it as simplistic as possible without them being able to affect overall file.
The problem happens when he (my superior) accidently makes a change in the primary sheet in the workbook with all the macros, it affects alot of my formulas and macros that are already in place. Within this workbook, it keeps a log of things from the other files results, so I have to have a record of it in the workbook, hence having a save event in place.

The Question: Is it possible to create a macro button, that will allow him to disable the codes below, so that he can close it and open again, so that it doesn't show any of the errors that happens by accident and try to close it again so there is no errors? Basically, I am asking what is the code for this, and where would I place it in.

Private Sub Workbook_BeforeClose(Cancel As Boolean)
Dim mylogoff
Set mylogoff = Sheet1. Range("A65536").End(xlUp).Offset(0, 1)
mylogoff.FormulaR1C1 = "=NOW()"
mylogoff.Copy
mylogoff.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Application.CutCopyMode = Fals
mylogoff.Offset(0, 1).FormulaR1C1 = "=RC[-1]-RC[-2]"
Application.DisplayAlerts = False
Sheets("Start Here").Select
ThisWorkbook.Save
ThisWorkbook.Close
End Sub......................

View 9 Replies View Related

Before Close Event (check User If They Logged Out?)

Jun 6, 2008

I am trying to ask to the user to check if they logged out when they close the workbook but my code is not working...

Private Sub Workbook_BeforeClose(Cancel As Boolean)

Sheets("OD&D Log-in").Select
If Range("H5") = "reconcile" Then
a = MsgBox("Do you want to Log-Out?", _
vbYesNo)
If a = vbNo Then Cancel = True
If a = vbYes Then
Sheets("OD&D Log-in").Select
Else
Workbooks("Daily OSD Log (ver5).xls").Close SaveChanges = True
End Sub

View 9 Replies View Related

Excel 2003 :: Double Click Event On Form Title Bar?

Dec 10, 2012

I am using excel 2003. I would like to double click on the form title bar to shrink the form to only show title bar. Double click again will restore the original size.

View 8 Replies View Related

On Row Click Event Show Dropdown In The Row

Mar 9, 2009

I have some rows in my sheet locked and some unlocked rows. When user clicks on a unlocked row I should be able to enter some information. I am suppose to populate some dropdowns in that row for him to choose. How can this be done??

I know when a user clicks a row worksheet change event is call. I can write a function in the worksheet change event to populate values in the dropdown. I went through some articles, and they say it can be done by hiding and unhiding rows.

View 3 Replies View Related

Chart To Show Event Frequency

Aug 21, 2008

I have a chart with event timestamps (2008-06-09 14:48:15.973) and two event types (A and B) with about 12000 events in total. I want to show a chart (probably line chart) that plots the frequency of events on a time axis (e.g. very many event A last night, not so many today, etc). I figure two time series with A and B independently so user can compare visually. But I dont know how to efficiently convert the events into a counter/frequency of events variable/column.

Ive looked into DSUM, DCOUNT & FREQUENCY functions to make a new column that shows how many events have happened in the previous 10 minutes without success. DCOUNT/DSUM problem: some of the criteria fields are computed by formula (date column minus ten minutes).

View 9 Replies View Related

User Forms- Create A User Form That Will "pop Up"

Oct 25, 2007

I have a spreadsheet with the following headings:

A
Claims Number

B
Name

C
Scheme

D
Admin

E
Date

I need to create a user form that will "pop up" and ask the administrator to enter the above details.

A - should be created automatically (ie last claim number + 1)
B - user enters manually
C - data retrieved from a list
D - data retrieved from a list
E - date is the date the information is entered

View 9 Replies View Related

Show Cell Value (text) In Comment Box Text Or Mouse Tool Tip On Gif Icon

Nov 16, 2007

I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.

View 14 Replies View Related

Show Cell Value(text) In Comment Box Text, Or Mouse Tool Tip On An Gif Icon

Nov 16, 2007

I have a spread sheet were the area is getting very limited. I need to insert a small icon and when the mouse goes over (like it does in a form tool tip) will show the value of a cell (text value) located in another sheet in same workbook, or I was thinking inset a comment next to the icon and link the comments of the comments text to cell with the text value.

I've look the properties of this to objects and can figure it out.

View 10 Replies View Related

Show Detail Event In Pivot Table

Nov 19, 2006

When you double click on a number in a pivot table data area you get a new sheet with that information showing the detail, is there anyway to "trap" this action?

I want to run a macro on the detail data but can't see a way to do it automatically, have tried, BeforeDoubleClick, PivotTableUpdate, NewSheet events but all have there draw backs if you are doing something other than showing the detail for the pivot table. Of course I can just run the macro after the sheet is made but it would be nice to do it on its own.

View 9 Replies View Related

Excel 2010 :: Catching User Delete Row / Column Event Possible?

Nov 15, 2012

If possible, I'd like to be able to catch & handle the event of a User deleting a row (or potentially a column) from a specific Worksheet so I can then implement some automated "housekeeping processing" on other existing rows / columns.

I'm using XL 2010 so from what I've found so far it looks like I should possibly be using the Worksheet_Change() function, but beyond that I'm currently stuck.

View 1 Replies View Related

User Form

Feb 24, 2009

I have a user form that I want to take the information and have it input on the worksheet. I want it to start at A3 and check to see if that cell is "" and if it is not then enter the data from the from horizontally. If A3 is not "" then continue down column A untill the first nonblank cell is and then select that cell and have the data entered horizontally.

I have this code so far but it is not working.

Private Sub cmdSubmit_Click()
Dim Month As Variant

Month = Me.cmbMonth.Value

ActiveWorkbook.Sheets(Month).Activate

I have done a bit of excel programming last year but have not done any for the last 4 months so I am a bit rusty.

View 9 Replies View Related

Event OnClick - Show Smart Art Shapes Below (child)

Oct 10, 2012

I'm trying to make a menu in my Workbook to access all the others sheets.

To make things easier for my boss, I'm trying to make the menu with SmartArt Shapes (Hierarchic) because it's easier to add/remove itens.

The thing is: he wants it to show the boxes below (hierarchic child) when i click the "mother" box.

It will work pretty like web menus except the mouseover. Image below

menu.jpg

View 1 Replies View Related

Combobox In A User Form

Aug 30, 2007

I've written a workbook that enables my workmates to enter sample information easily (workbook attached). What i need help on i cant get the combobox 's on the user form to pick up the related info in worksheet named "data" and insert it into the relavant coloumn in tab named "Results". I can get it to work without using combobox's and just typing the info into a textbox but i wanted to use combobox's.

Another thing i wanted to do was pick invidual results and send them the "Report" for printing. how would i do that.

View 14 Replies View Related

User Form Drop Down Box

May 25, 2008

I have a project, i want to create a user form, basically i have a work book that contains dinner menu's on column A and ingredients in column b.
I would like to create a user form that have a drop down box that would show all the possible menu's referencing my workbook sheet1 column A values. and by selecting a item, i would like to be able to show all ingredients needed, is there a way to do this?.
I hope so, it would be so cool to do this.

View 11 Replies View Related

User Form Interaction

Jun 22, 2009

I have created a multi utility user form that user can initialize by a shortcut key. The problem if user want to see the content on sheet or want to change the active cell, he has to close the form and then do any action. This form is initialized by a command and default included in excel as a Add-in. Is there is any way to make the form floating i.e. user can manipulate the data and can see the form as well.

View 4 Replies View Related

Using The Scroll Bar In A User Form

Jul 8, 2009

On a userform, I have 5 paragraphs of text that the user needs to read. The problem is the user can't see all 5 paragraphs, the user is only able to see about two paragraphs. I don't want to make the userform larger but I would like to add some type of scroll bar that would allow the user to scroll up and down to view all of the text.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved