I need to fill out a web form and have been doing so like this:
With hDoc.forms(0)
.NameOfInputBoxWithinTheForm.Value = "AAC"
.NameOfInputBoxWithinTheForm.Value = "1/1/7"
.Search.Click
End With
I have recently run into forms where the name/id of the input element contains special characters. Like Name#OfInputBoxWithin$TheForm$1. which VBA wont allow me to use in the code above since they are type def characters.
How do I add special characters in-between text? I know how to include a registered sign by using =CHAR(174) but what I do not know is how to include text before and after the sign itself.
What i need is the following: In cell B1: if A1 is greater than 08:00am but less than 14:00pm than B1 should have a tick which is green, if cell A1 is greater than 14:00pm than B1 should have a cross which is red...
I have a worksheet that I produced from optical character recognition, and there are a lot of funky characters that I need to get rid of. One is a line break or carraige return (I assume it's the same character that I could insert by entering ALT+ENTER). How do I search for this special character to replace it? How do I identify what that invisible character is?
I am looking a macro which should perform below activities
I have a lists of suppliers which needs to cleansed....
1.replace all the special characters with a space
2.replace Corporation with Corp Incorporation with Inc Limited with Ltd Limited partnership/ltd partnership with LP Company with Co ASSC/ASSOC with ASSOCIATION/ASSOCIATES (SEARCH SUPPLIER IN GOOGLE FOR THE CORRECT ONE) MGNT with MANAGEMENT SVCS with SERVICES DEPT with DEPARTMENT Unltd with UNLIMITED Ctr with CENTER UNIV with UNIVERSITY
3. Remove any text, Special characters and numbers after INC,CO, LTD, CORP,LLP, LLC
The macro should when I select any particular column... not restricted to column A
I have created a multiple choice quiz maker that randomizes the questions and responses. This means that the quiz questions/responses must be copied and pasted each time a new quiz is generated. But in doing so, Excel loses formatting (such as super and sub scripting) and some special characters (like pi, alpha, the degree symbol).
Is there a way to get such things to copy properly from cell to cell, sheet to sheet, using Excel?
I need to check whether a description of a certain product in my excel has any of below special characters ! @ ' " ] [ } { | & $ # ^ ~ % ® and also the description should not exceed more than 40 characters. i tried using the "If" condition but it does not seem to check the same.
I am using Excel 2002 SP3. I have a multiple worksheet workbook and am using links between some cells so as to keep the updating down to a minimum. Typically I can enter [code]=' Storage '!E70[code] to transfer the contents of one cell in the ' Storage ' worksheet to the cell I want the data in and I get the value of that worksheet/cell. But sometimes all I get is the data I entered: ie ='Storage '!E70. Is there some for cell format problem that prevents this from happening?
I have data in column A. The data contains a name, an underscore and initial/s. For example: rebecca_rt, john_j, etc... I'm trying to pull only the characters to the right of the underscore. I played around with the below formula that I found under a similar question thread. But, it doesn't quite work. As it is now, it returns ecca_rt when I just want rt. I'm sure this is probably really close =IF(ISERROR( FIND("_",A1)),A1,RIGHT(A1,FIND("_",A1)-1))
Working on a macro to replace a list of about 20 specific "Special" Characters in excel, and have ran into 6 that will not work.. Following are the characters: ā, č, ć, ř, ş, ż
I have inherited a spreadsheet that will prompt the user for a text file to import and it will split each line into different cells based on column widths. The problem is that one field can contain non-printable characters that are causing the macro to split the data into 2 lines.
I think one of the special characters is a new paragraph but there could be others.
I need help with replacing these special characters with a space prior to spliting the line into an array.
I have conditional formatting set to hilight duplicates, but I a, wonder if there is a way to exclude special characters (in this case specifically dashes).
I am aware that special characters such as -,(,),[,] are not permitted in named ranges (for lists), but is there a workaround for this? I have a lot of dependent lists that need to access names that contain either a - or () or both. I could simply remove the -'s or ()'s using find/replace, but they are required, as they're part of the name. I am aware of this method http://www.contextures.com/xlDataVal02.html#Illegal but I have a lot of dependent lists across a sheet, and a VLOOKUP isn't going to work. If there isn't a workaround, are there any allowed characters I could use to replace the -'s and ()'s?
This formula I want to apply it in another workbook. It split in different columns the content of a cell.
The formula is below:
[Code] .....
In cell A2 I have the following data: |516582-001-99|414816-001-99|414816-003-99|516582-001-99|
If I apply the formula above in cells B2 to E2 it returns a blank cells. But if I delete the first "|" sign in the left side manually the formula works perfectly by splitting the cell into columns from B2 to E2. The issue here is that I have more than 300,000 records. Just imagine the amount of time invested in just deleting the first "|" at the left side.
I need a variation of the formula above that in first place delete the first "|" at the left side and after that continue with the proper work of the formula.
I have a column of text where I need to remove all the characters to the right of the last occurance of a special character.
I think a process like reading from right to left, look for the first occurance of the special character, and return the characters to the left of this position.
If I can determine the position of the last occurance of the special character, I could use the LEFT function.
The SEARCH function is close. It finds the position of the first occurance of text inside text but it reads from left to right. I need to read from right to left.
Another approach is to examine each character one by one from right to left. If the character is not the special character, delete it. When the character is the special character, delete it and stop the process.
There is no consistency in the text. The total lengths vary. The number of times the special character occurs in the text vary. The number of characters to the right or left of the last special character vary.
I much prefer not to have the solution be some VBA because I need to share it with others who are even less capable than I am. We are using Excel 2003.
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
I'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
I am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS Sub RecallQuote() ' ' RecallQuote Macro ' Sheets("Form").Select Range("C2").Select 'this is the cell that holds the quote number to look up from the table
I have a spreadsheet I use to keep track of weekly sales patterns and use for estimating the amount of a product I would need to order taking into account what I would expect to sell in a given week and what stock I have at present. On the example I've attached, I show where I enter my storeroom count figures, which are organised by supplier and the position in which a particular product appears on the supplier's order form. I have a page which lists the orders by suppliers and which are used to place the orders by e-mail or telephone.
At present I have each supplier section of the order form directly linked to a cell on the storeroom count as per columns K to M on the attached file. However, this means that as products are de-listed by suppliers and extra products become available, I have to edit the formula in each cell as the products now appear in a different position on the storeroom count and may otherwise end up on the order form for a different supplier. I would like to set it up so that I just have to select the supplier name and the table below will automatically fill with the required info, in order of the position they appear on the supplier's form. I'm struggling to combine vlookup and hlookup. Is there a way to do it or do I need to rethink?
I'm trying to pull up a second form from a command button within a form. There's a command button in a sheet to open the first form (frmOrderInput.) Then there's another command button in that form to open the second form (frmPriceInput.)
I have got a userform that fits my 24inch monitor screen perfectly, however it doesn't fit other screens. How do I get windows style scrollbars added to the form so people can use these to see the whole form?