I have tried to make a VBA that would allow me to type in:
10657 and have the VBA to automatically convert that into a timeformat -> 1:06:57.
It works ok as long as the typed number is 4 digits or shorter.
If i type 12345 I would expct to get 1:23:45 but I get 00:00:45
Private Sub Worksheet_Change(ByVal Target As Range)
Dim VaValue As Variant
TCol = Target.Column
If Not (TCol = 5 Or TCol = 6) Then Exit Sub '
Is there a formula that will allow me to look for the existence of any number value in a row of one worksheet and then return a specific number value in a cell on another worksheet? For example, if the formula finds any number value it will always return the number 15 to a cell on another worksheet.
View 3 Replies View RelatedI am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the
Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub
"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?
I have a sheet that I enter time into in a 24hr time format, ie Military Time and cant figure out how to format the cell so that I can just type in the numbers and it automatically put it in the hour format. Currently I have to type in the hour then the colon the the minutes otherwise if I type in the time in a three or four digit format it just gives me 0:00.
View 9 Replies View RelatedI'm creating a spreadsheet where a test note taker needs to repeatedly enter the date/time code in a column as events occur.
I tried recording a macro that will enter the =now() formula and then copy that over itself with the value but didn't work.
So now I'm thinking I need to just write code that will determine "now", and write that serial value to the next open cell (with care not to overwrite the previous data point). I'd like to execute this with a simple keystroke.
The thought is to start at the top of the column, go down until the next blank cell is reached, insert the time code (can't be a formula that will change but an actual value).
I've got a spreadsheet set up for a simple barcode scanning system. The user scans the barcode of the product when complete, and it logs it to a sheet along with a date & time timestamp. I'm then planning to use a v-lookup (barcode to product name) & pivot-table to count instances of 'product name' so that I can monitor what is being produced easier, nothing too tricky.
The problem I'm having comes from the products of the same spec having the same barcode, so data validation is hard to apply, as I can't 'not allow dupes' - the concern I have is that if the user unknowingly (or knowingly!) scans the same ticket twice, I think I've got 2 of a product when I've only got one. The idea I had was to lock all cells for a set time period (say 1 minute) after an entry so that it couldn't be accidentally scanned twice.
I want to be able to type a 24 hour time into the column and have it format with colons - for example: I want to type 123456 and have it show up as 12:34:56
View 5 Replies View RelatedHow can I get an automatic time & date entry into cell B1 based on a alphanumeric entry in cell A1. The time and date must not re-calculate every time the workbook is opened.
View 4 Replies View RelatedI have entered VBA code and tested it with success. If I then save & close the excel file and then re-open it, the mask time entry is not saved (time does not appear correctly after input) and per instructions I have designated (and am using) the cell input range.
View 9 Replies View RelatedTextbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
[URL]
I have a worksheet that I enter time values into individual cells:
A1 = 6:00
B1 = 12:00
C1 = 12:45
D1 = 17:15
When I enter these values, I would like some of the values to round to the
next higher "30 minute increment" such as Cell C1 should become 13:00.
I would also like some of the values to round back to the next lower "30
minute increment" such as Cell D1 should become 17:00.
I have cells on my spreadsheet which contain: =now() and they work as they should - displaying the date and time at the moment of entry. Unfortunately the cells update when other info is added at other locations on the sheet - is there a way to ensure they enter the current 'now' only at the point of initial entry - such that the data doesn't then alter?
View 3 Replies View RelatedI am looking for a formula or VBA that will be in each in cells D5:D300 and will look at the value entered into the cell in column C and change the 4 digits into the date and time in the same format as NOW() returns.
Example
2045 becomes 17/02/2012 20:45
But I would also want it to see if the 4 digits that represent the time are after 14:00 and before 00:00 then the date would be the date in cell A1-1
example
Cell A1 18/02/12
2045 becomes 17/02/2012 20:45
I'm making a data entry form for a user, and one of the fields is in a time format (mm:ss). Is there any way that I can validate that field in "cmdOK_Click()" so that when the user clicks "ok" on the data entry form, if they haven't entered a date a msgbox comes up.
I tried IsNumeric with an If function but to no prevail.
Is it possible to have a cell, say B1 - which will return the Time and Date Value of when something is entered into Cell A1?
Example, I type "Hello" in Cell A1.
Now B1 will show me the Time and Date which i typed in Hello into A1.
I need a function that records the time and date in a cell, say a2, when data in entered in to another cell, say a1 in the same spreadsheet.
This way I can tell when data in a cell in my spread sheet is updated.
I want to time stamp when I make an entry in to a cell. Example when I enter a name in a32 I want l32 to time stamp the time I entered the name.
View 10 Replies View RelatedI have a problem with entering 12-hour time data in excel.
If I key in 3:00, Excel will recognise it as 3:00 AM.
If I key in 3:00 p, Excel will recognise it as a text entry. To get Excel to recognise it as 3:00 PM, I have to use the 24-hour format. i.e. I have to type 15:00.
I have checked the Regional and Language option in the Control Panel. Everything looks fine.
Does anyone have such encounter with Excel before?
I would like to know how to write the macro that execute a formula everytime it detect an input in another column.
Attached is the example of what I want to achieve.
Macro to perform when entry detected.xlsx
I am trying to get excel to auto populate the current date and time each time I make an entry, however, each time i make an additional entry the current date and time populates but it changes all the prior entry's with that current date and time.I am trying to keep a log of all the times I make a new entry. Correct formula that will work?
View 9 Replies View RelatedIs it possible to make a textbox entry be a number.
I have a text box on a sheet and i have linked it to a cell on a different sheet.
The problem I am having is that when I enter a number in the text box say 2.8 it is stored in the linked cell as text. is it possible to have the entry be number as I need it to be a % and used in other formulars?
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies View RelatedI have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
I need a sum function in A1 of a "Total"-sheet that totals cell A1 in every sheet with a certain color on the tab. The number of sheets can vary from time to time.
Any idea about a dynamic sum function that will do this, in combination with VBA?
I have thousands of timestamps that have a start & end date and time in 2 separate columns. (one named start and one named end...)
I also have numerous set time periods that i'm interested in.. (about a dozen or so)
for example 01/01/2008 - 05/01/2008, 07:30:00 - 10:00:00
What i need is to be able to count the number of times the full time period i am interested (07:30:00 - 10:00:00) in falls in between the thousands of start and end timestamps i have. The time periods must also fall within the date range specifed.
So if my timestamps were
Start: 01/01/2008 06:30:00 & End: 02/01/2008 11:00:00, based on the set time period above, there would be a count of 2
and if my timestamps were
Start: 01/01/2008 07:05:00 & End: 02/01/2008 09:00:00 there would be a count of zero as there is not a full uninterupted timeperiod 07:00:00 - 10:00:00 between these timestamps.
and if my timestamps were:
Start 01/01/2007 07:00:00 & End 02/01/2007 10:00:00 the count would be zer as this is a year early!
So the title isn't really totally descriptive but it was all I could come up with. I have a work book that has 30 identical sets of 5 cells for users to enter in information. Some of my users will not need all 30 sets. I'm wondering if there is a way for the user to enter the number of cells they need and have excel then format so they have the desired number, instead of 30. Then have excel change all the instances of this number in formulas so that it matches the new number of cells. I hope I explained this well enough for someone to help.
View 9 Replies View Relatedway to set the format of an entry made in a txtbox (on a user form)
I have a txtBox that the user enters an amount, but when this is pasted in the excel workbook the number is stored as text and won't evaluate.
I've tried changing the formats... but the option to change teh valuse from txt to numberinc is not "codable"...
I want to find the Row Number, not necessarily the cell value, of the last non-blank entry in a Column.
If the address of this row is found, then that could also be useful. I believe there are some simple Excel functions to do this, maybe involving the X1Up feature. I've searched the threads and haven't found a clear answer this.
Below is code that I custom wrote, but its long and tiresome to use.
'The purpose of this sub is to find the last filled row in a column
'Knowing this last row is useful for telling later
' looping operations which row to stop on.
'The logic of this sub is that it will look down a column.........
I have a userform that has a time field on it and then the userform displays the time as a number.
Ex. I entered 11:00 AM in the Time of Contact field and the form displays it as 0.458333333333333.
content from form is captured via formulas to a CIMLoad format on another tab
Users keep entering four to six decimal places in weight value
I need to limit the cell to either whole numbers, or a maximum of 2 decimal places
The cell is formatted to two decimal places, but when you activate the cell it shows the full value they entered, and so does my CIMLoad
How to I limit the value in this cell to whole numbers or numbers with a maximum of two decimal places?
