Textbox/SpinButton - Time Greater Than 24hrs

Jun 2, 2006

I'm developing a local timesheet userform application and want to capture times which may be greater than 24hrs using a textbox/spinbutton pairing.

I've managed to pair up and work with times up to 24hrs but the output always resets after 23:55.

I've also tried formatting the output as "[h]:mm" but without success.


Private Sub sbDTime_SpinUp()

With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub

Private Sub sbDTime_SpinDown()
With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub

View 9 Replies


ADVERTISEMENT

SpinButton To Change Time After TextBox Entry?

Nov 3, 2013

Textbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.

[URL]

View 2 Replies View Related

Formula To Calculate Pilot Duty Time In 24hrs

Jun 8, 2014

I am a flight dispatcher who is having difficulty with a Flight Duty Period tracking sheet. I need a formula which gives me the total duty time of a pilot in one single day, which is calculated by using the DUTY START time of first flight and DUTY END time of last flight in the same day.

I have attached the excel file. Please download file and open the FDP tab from the file and goto cell AI7.

Basically I need a formula in cell AI7, which checks up the date on column D and selects a date range of the same date in column D (in this case D7:D8) and then give the difference between the Duty Time START of FIRST FLIGHT (column AF) and Duty Time END of the LAST FLIGHT (column AG).

Ex: 12:05-9:20 =2:45

Please note that I want the formula to automatically check the cells in column D for the dates, not manually select the dates, because pilots do more than one flight per day sometimes and it is never same. Formula than should be able to calculate the difference between the largest number in column AG and lowest number in column AF in the same date range mentioned before.

Uneven number of flights on different days is making it complicated for me.

View 2 Replies View Related

Adjust Userform Height Via SpinButton Linked To TextBox

Dec 30, 2009

I have a userform with a listbox set to a range of numbers from 1-10, I would like my userform to expand/collapse dependant on the number within the listbox. The problem I am having is the forms height does not adjust from using the toggle controls only when you select back into the listbox itself.

Private Sub ListBox1_Change()
If Me.ListBox1.Value = 1 Then
Me.Height = 180
End If
If Me.ListBox1.Value = 2 Then
Me.Height = 210
End If
If Me.ListBox1.Value = 3 Then
Me.Height = 240
End If
End Sub

I have tried using click/after change events however I get the same response. Am I missing something from my code or should I be using another control (SpinButton for instance).

View 2 Replies View Related

Textbox Greater Than 255 Characters

Jan 13, 2010

Not sure if this is a simple question or not - is it possible to pass the contents of a userform textbox (which exceeds 255 characters ) to a worksheet cell? It seems to truncate when I try to do so.

View 7 Replies View Related

Textbox Input Greater Than 9

Aug 22, 2009

I have a userform with a textbox1 on inputting the numbers 1-9 the code fires to open that qty. of worksheets it works fine. But, why if the user wanted to input 10 it reads the 1st number 1 and only opens 1 sheet. I need it to open another userform if 10 or greater is input.

Option Explicit
Private Sub Userform_Initialize() 'CALCULATES # OF SHEETS
ThisWorkbook.Unprotect
ActiveSheet.Unprotect

View 9 Replies View Related

Userform Textbox Require Number Greater Than 100?

Jul 4, 2014

I want to require the user of my Excel Userform to input a number greater than 100. How do I do that?

View 4 Replies View Related

Count Dates In A Column -24hrs

Nov 18, 2009

I have a range of data in a spreadsheet that has entry dates. To one side I have a cell that =today()
What I want to do is where the entry date is in my range of data is insert a column that will tell me "yes" if the entry date =today()-1

View 8 Replies View Related

Calculate/Display Times Greater Than 24 Hours In TextBox Control

Oct 23, 2006

I have made a userform where I calculate how long time an operation takes. If the time fe.g. is 25 hours and 24 minutes then I get the result 1:24. I have attached my userform as it looks now. If you write 540 in the bar and 550 in volume and press "Beregn" then "Norm tid + 10%" will write 1:24 and not 25:24. Is it possible to have the Userform to write 25:24 or 1day and 1 hour and 24minutes?

View 2 Replies View Related

End Time To Be Greater Than Start Time

Mar 3, 2009

I have four different times on my report, enroute, on scene, clear of scene, in service. I need to make sure that the user's input for each time is < or = the previous time. Also I would like for my time to show in 24 hr format. Do I need to change my clock or can I do it without changing the clock format. users will use the CTRL +SHIFT+: to insert the current time

View 2 Replies View Related

Calculating Time If Value Is Less Than Or Greater Than?

Mar 30, 2014

I'm having a DICKENS of a time on this one. To explain, I have 3 columns where time is entered: a 'Time of Call', 'Time of Arrival', and 'Response Time'. The 'Response Time' cell autcalculates by simply subtracting the 'Time of Arrival' form the 'Time of Call' and using the difference to show the response time. To make time entry into the 'Time of Call' and 'Time of Arrival' simplier for my co-workers, I formatted those cells as 00:00 so that anytime you enter a number it will convert it to a time format (i.e., if you enter in the numbers 745, it will show as 7:45 in the cell). Because of this, when the response time is configured, it does it in hundreds instead of time format. So, if you enter in 7:45 as your time of call and 8:15 as your time of arrival, it shows 70 minutes as a response time because it sees the 7:45 as a whole number...745. Therefore, 815-745 DOES equal 70, but...that's not what I'm looking for. I want it too configure this as time...not as whole numbers.

View 2 Replies View Related

Greater Than Less Than Formula For Time

Aug 30, 2006

I have a time value h:mm in one cell and I have a range of three cells that I want to display values depending if the time is:

under 12 hours

over 12 hours and less than 24 hours

over 24 hours and less than 36 hours

over 36 hours

I have been using the following formulas where A1 holds the time value:

=IF(A1<12,"true",0)

=IF(24>A1>12,"true",0)

=IF(24>A1<36,"true",0)

=IF(A1>36,"true",0)

None of which seem to work

View 9 Replies View Related

VBA If Current Time Is Greater Than 5PM Then Call Macro

Nov 1, 2012

add some code to a script like so:

If current time is > 5PM Then Call MyMacro

View 2 Replies View Related

Calculate Time Difference Greater That 24 Hours

Aug 7, 2008

I have an excel spreadsheet where you enter the start time and end time for job function. Since some of the times cross midnight, I use the formula J3=IF(I3>H3,I3-H3,1+I3-H3) where I is the end time and H is the start time (format hh:mm). This part works fine, however when I sum column J and change my format to Time 37:38:00 (since it is over 24 hrs), it returns a large number of 2234:48:39 which should be closer to 223:00:00.

View 2 Replies View Related

Date/Time Formula: Pick Up A Date With Time Entry On A Worksheet And Place It Into A TextBox On A UserForm

Jun 17, 2006

I am attempting to pick up a date with time entry on a worksheet and place it into a TextBox on a UserForm. Format on the sheet is mm/dd/yyyy h:mm AM/PM. The UserForm is placing the value as mm/dd/yyyy 12:00 AM. here is the

Private Sub UserForm_Initialize()
If Not Range("dDate").Value = "" Then
TextBox2.Value = Range("dDate").Value
TextBox2.Text = Format(DateValue(TextBox2.Text), "mm/dd/yy h:mm AM/PM")
Else
TextBox2.Value = ""
TextBox2.SetFocus
End If
End Sub


"dDate" is the named range where the date is sitting. The format is also set on the TextBox2 exit event. Can anyone see why only the date portion is being transfered with the default 12:00 AM for no time component of the value?

View 3 Replies View Related

Spinbutton Unprotect...

Dec 25, 2008

When I protect the worksheet with the spinbutton, the spinbutton is no longer accessible. How can I modify the code below (provided by Leith Ross) to make the spinbutton accessible in a protected sheet?

View 3 Replies View Related

SpinButton For Images Control

Sep 28, 2009

The script it's almost all complete and it'already working. How works this script:
From the Combobox_click i load a txt file, the script from the txt file get only the first column of the file. Its a list of numbers.

When this list of code numbers it's loaded in the Combobox_click, for each code number in the image combo box there is a one corrisponding image. For the images folder in the cell J2 the is a one Path reader. the scrip work perfectly.

What i need:

As you can see, under the image combo box, there is a SpinButton.
I need that by clicking the Forward or Back button i can go forward or back of the images list.

View 2 Replies View Related

SpinButton Altering Adjacent Cell?

Jun 12, 2014

I have a spinbutton on a userform. Here is the section of code for SpinUp:

[Code]....

Normally, I wouldn't hard code an address in like this, but I was given a last minute project to present on Monday, so it's down,dirty, and quick. Anyways, the adjacent cell "O7" has a formula referencing another page. When I spin the spinner it activates the correct cell (and continues to do so as long as I press the button), but here's the wierdness: cell "07" formula disappears, leaving the existing value in it. It's like it copy pastespecial values.

I've stepped through the code and it's not referencing any other procedure. It happens on this line:

[Code] ....

View 1 Replies View Related

Spinbutton Incrementing Crashes Workbook

Apr 3, 2008

I use spinbuttons to increment 3 data cells (C7:C9). These cells are used as entry data for some calculations and also trigger some macros via change event. Every time I use them the workbook crashes, this is only since I modified one of the instantiated macros that sorts a table on another sheet. See below the spinbutton code with the call of the macro and further the code of the sorting macro:

Private Sub SpinButton1_SpinDown()
Range("C7").Value = Range("C7").Value - 0.05
End Sub

Private Sub SpinButton1_SpinUp()
Range("C7").Value = Range("C7").Value + 0.05
End Sub

Private Sub SpinButton2_SpinDown()
Range("C8").Value = Range("C8").Value - 0.05
End Sub......................................................

View 9 Replies View Related

SpinButton To Increment By Decimals Not Whole Number

Sep 2, 2006

I’m using this code to change the value of an active cell with a spinner named: 1.

Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim lNum As Long
If IsNumeric(Target) Then
lNum = Target
If lNum = Target And Target >= 0 Then
With Me.Shapes("1").ControlFormat
.LinkedCell = vbNullString
.Value = Target
.LinkedCell = Target.Address
End With
Else
Me.Shapes("1").ControlFormat.LinkedCell = vbNullString
End If
End If
End Sub

The problem is, that whenever I click or activate a cell its value automatically changes to 0. The spinner works just fine modifying the value of the activated cell. The problem is that this code somehow causes all the decimals such as 0,3 0,1 or 0,8, entered manually, to change to 0. This way only integral numbers, such as 1, 45 or 100 are accepted. I must truly say I have no [no need to swear - mod] idea how to fix these problems meaning the automatically inserted 0 and the fact that the sheet doesn’t accept decimals changing them to an integral number.

View 2 Replies View Related

Link SpinButton To The Cell It Is Located In Automatically?

Oct 17, 2012

I want to be able to link spinbuttons to the cell it is located in automatically, so I can move it around or copy and then paste into other cells. I do not want to use one button to increment a selected cell.

View 1 Replies View Related

Spinbutton To Increase By Different Increments According To Current Value Scale

Jan 1, 2009

I don't know if title is understandable, English not being my tongue, anyway here's my problem, the current value must be increased or decreased by 0.01 if it's between 1 and 2, by 0.02 between 2 and 3 and so on. I'm really new to VBA and after a few hours I came up with the following code which works fine till the value of 6 and then gets stuck: ....

View 14 Replies View Related

Link Spinbutton To Chart Data Source

Nov 21, 2006

For example, if my graph currently shows B1:L1 range, how by clicking a spin button to make the graph show B2:L2 range?

...

View 9 Replies View Related

VBA Time Display In Textbox

Mar 22, 2013

I have a bit of code that fills textfields etc in a Userform. The data is being pulled from the spreadsheet but in this case the TIME is displayed weirdly.

It shows as 0,46875 and should show 11:15:00 as in the spreadsheet.

the line that reads this value is

Code:
.STime.Value = Cells(ActiveCell.Row, "V").Value

View 9 Replies View Related

Place Time In Textbox

Jul 29, 2008

is it possible to place time in a textbox on a userform?
I am trying to make 5 textboxes to display different time zones.

View 9 Replies View Related

Textbox Time Calculation

Oct 26, 2006

I'm attempting to calculate the total number of hours between a start time and end time using textboxes on a Userform.

Here is my latest attempt:

Private Sub D24_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Dim myvalue As String
Dim myhour As String
Dim myminutes As String

myvalue = D24.Value

Select Case Len(D24)
Case 1
myhour = "0" & Mid(myvalue, 1, 1)
myminutes = "00"
Case 2
myhour = Mid(myvalue, 1, 2)
myminutes = "00"
Case 3

The above codes are an attempt to force an entry as time (7, 07, 700, 0700=7:00 / 13, 1300=13:00 etc.). However, the result is not correct.

For example:
Start Time in Textbox(D24)=07:00
End Time in Textbox(D25)=17:30
Result in Textbox(D27)=0.4375
Desired Result in Textbox(D27)=10.5

I've never calculated times in textboxes,

View 3 Replies View Related

Spinbutton To Cyle Backwards/forwards On Multipage Userform?

Dec 8, 2008

I'm trying to create a userform to act as a walk-through for a process. I've settled on using a multipage to conserve the required screen real-estate, and break the process into natural 'stages'. I've happily got these stages fixed into the userform's pages, with a couple of command buttons running events OnClick - but cannot figure how to get the spinbutton to navigate between the pages.

View 5 Replies View Related

Customize ActiveX SpinButton Value - Not Decrementing (or Incrementing) Correctly

Feb 17, 2010

I have an Active X SpinButton control directly on a spreadsheet that changes the input cell. (The idea is that later on, there'll be a bunch of these input cells, accompanied by their respective SpinButton controls).

I'm allowing the user to define the Min, Max, and Step (SmallChange) value of the SpinButton because (1) I need it to do decimal points and negative numbers and (2) that's what my boss would have wanted.

So I set the Min, Max, SmallChange value in the SpinButton properties to "0" then try to manipulate them in the VBA code.

What went wrong with the code is hard to explain. But basically, when I use the SpinButton to increment or decrement, it didn't quite do it correctly. If I fix the increment part of code, then the decrement part of the code goes wrong and vice versa.

An example: I have Min as "0.5%" in cell B7; Max as "4.5%" in cell B8; and Step (SmallChange) as "0.5%" in cell B9. The Input cell is in cell B10 where user can either type in a value within the defined range (enforced by data validation) or use the SpinButton to change the value.

To replicate the problem: I type in "1.0" in the Input cell and click on the left SpinButton and it would not allow me to go to the defined lower limit (which is 0.5%) in this case.

Here are my codes:

Private Sub SpinButton1_SpinUp()

Dim MyMax As Variant
Dim MyStep As Variant
Dim MyInput As Variant

MyMax = SpinButton1.Max + Range("B8").Value
MyStep = SpinButton1.SmallChange + Range("B9").Value

MyInput = Range("B10").Value...................................

View 9 Replies View Related

Formatting Userform Textbox To Time?

Jul 22, 2014

I have a timesheet, with a custom format of [h].mm. In my userform, I have a textbox which I would like to use to enter a time in, but when I run the macro, the time shows up correctly (such as 0.12 for 12 minutes), but it is still calculating as text. I've tried all the various codes I have found throughout the board but nothing has worked so far. I can get as far as making 0.12 minutes show as 12.12.00 AM, but then it shows the whole time instead of the 0.12 which the cell is formatted to do and does not calculate it at the bottom where I grab all the times from that column.

View 1 Replies View Related

Userform Textbox Calculations (time)

Feb 21, 2012

I've got a userform which I'm developing (my first) and I have two textboses:

Textbox6 = start time & Textbox7 = end time & Textbox10 which contains the calculation (Textbox7 - Textbox6).

Now I have code that works great for normal numbers however I need to be able to make the calculations in TIME (hence the start time / end time).

How I can amend this code to be able to calculate total time between textbox 7 and Textbox6.

Private Sub TextBox6_Change()

If TextBox6.Value = "" Then Exit Sub
If TextBox7.Value = "" Then Exit Sub
TextBox10.Value = CDbl(TextBox6.Value) - CDbl(TextBox7.Value)

[Code] .......

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved