I was in the clear for a while, and now this error is back - even though I haven't changed my code. I cannot seem to get rid of it now. I have read the knowledge base articles on the MS site and still, no luck. I have the following code in a module. I am erroring whenever I try to paste (line 120). The error message is ErrNumber -2147417848:=Automation error The object invoked has disconnected from its clients....
View 9 Replies
I am trying to create a macro that will take inputs entered into a range of cells in 1 worksheet and then paste it into another range on another sheet. The target range is selected based on a condition and once the values have been pasted then the target range should be locked.
I have been trying the following code but keep getting the Run-time error 1004 telling me that the PasteSpecial method of range class has failed. Can some one explain what I may be doing incorrectly?
Code:
Dim i As String
i = Range("Month").Value
Select Case i
Case "January"
Sheets("INPUT SHEET").Select
Range("Input_In").Select
Selection.Copy
[Code] .........
I have code that selects and copies data from one sheet onto another sheet. the sheet that is getting data copied too has borders defined. When i run the code i get a debug error. Here is the issue.... when i remove all the borders it works fine. I have tried everything i can think of to solve the problem but have had no luck. anybody have an idea what is causing this. i attached the workbook file so you can see what is going on.
View 2 Replies View RelatedI'm generating a runtime 1004 error with the macro I have attached to CommandButton1, "Clock_In".
The macro is copying the name, date and time from 3 cells on Sheet1 and pasting special values to another sheet.
I have a VBA excel file that pulls data from a CSV file downloaded from a link. I format this data into a table through excel and then copy it over to Outlook. This is where the problem is. I get a runtime error 4065 for "file is locked for editing".
View 1 Replies View RelatedWhen I read a CSV file into a recordset, the headers are not all being read. I get gaps in the headers for whatever reason. Attached below is the Function to load the recordset from the file. I have hard coded Hdr to "No" in the connection string.
Code:
Function QueryByID(tableName As String, fieldToQuery As String, Target As Long, Hdr As String) As Recordset
Dim strFilePath, strFileName, strQuery As String
Dim oFSObj, oConn As Object
Dim oRs As Recordset
Dim f, lastRow As Integer
[Code] .......
The below is how I output the resultset:
Code:
Sub OutputResultSet(aTable As String)
Dim row, col, i, j As Integer
row = 1
col = 1
ThisWorkbook.Sheets(aTable).Activate
[Code] .....
I have triple checked the CSV file and the first row in each file has definitely got headers. Some headers are loaded and output fine, others are just blank.
I am getting a 1004 error "Paste method of range class failed"
I'm opening a workbook, copying the Detail Budget worksheet, switching to the active workbook, unprotecting the sheet in the active workbook and then pasting the copied worksheet. Both sheets are named Budget Detail. Any ideas?
Using either the pastespecial or activesheet.paste gives the error.
Workbooks.Open newfn
Application. ScreenUpdating = False
Sheets("Detail Budget").Select 'select Detail Budget tab in the Budget Template file
Cells.Select
Selection.Copy
'now paste in the this workbook
ThisWorkbook.Activate
Sheets("Detail Budget").Select 'select Detail Budget tab in the BCL workbook
ThisWorkbook.Sheets("Detail Budget").Unprotect PSWRD
Range("a1").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:=False, Transpose:=False
' ActiveSheet.Paste
(both paste methods fail)
I have created a daily operating room schedule in which each time slot has a drop down box for the Doctor doing the procedure and the Group of doctors from which he/she came.
It is a yearly schedule with each day of each month duplicated on a tab for that month - the same daily schedule for each.
I have been able to duplicate each day right up until the 25th of the month in which I attempt to save the spreadsheet and am given an error stating it can not save some of the data, though the data appears to be intact (the validation drop down lists)
Upon closing and reopening the spreadsheet, all of the cells that contain validation including and after the 25th of the month are simply gone.
I have attempted to attach a copy of the file but I keep encountering an error with the database.
Zip file with xls file has been added
I'm new to VBA but have had it working well for me, until the other night when a user complained that when he ran a macro, it came up with the error "Paste method of Worksheet class failed". I should note that this has worked time and time again, so I'm lost. I also found tonnes of answers with a Google search but they were all relative to that persons code.
So this is the code I am using to paste from the clipboard into another tabbed worksheet :
[Code] .....
Excel 2003
Windows Vista
I keep getting this error: (at the line highlighted in green)
Runtime error '1004'
PasteSpecial method of range class failed
**** Open workbooks to transfer temporary data
[Code]....
breeze.
Here is my situation:
X Y Z
Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep
A
B
C
The above format is how I want my spreadsheet to look like. On another sheet within the workbook, I have a chart with some control options that allow me to vary X, Y, Z (I can vary either of these individually). Anytime I vary any one of X,Y,or Z, then the values in A,B,and C all change. This is what I am looking for, a Macro that will allow me the opportunity to everytime I change or vary an option (X,Y,Z), I can hit "Save Scenario" and the new values will be appended to my "Report" sheet. The values of A-C and X and Y are kept on a sheet entitled "FY 07". X is maintained on a sheet called "Inputs". So in all, X,Y, Z and A,B,C are all copied for each scenario.
I have a workbook with a database of 15 different products. We receive information with current prices for each of the 15 products on a weekly basis. This info comes in one single worksheet. I have created a different file with one worksheet for each product to track price behavior over time. I need to update these database everytime I get a new report. What I was trying to do is to develop a Macro to copy the data from a "Master" worksheet that includes all 15 products info to the respective worksheet for each product. Information is sorted in columns having the most recent date in the lowest column. I would need the Macro to copy the new data below the last price for each product. I would copy the data into the "MAster" worksheet, then run the Macro who would copy each row and paste it in its respective worksheet in the row rightafter the previous one.
View 4 Replies View RelatedI am copying some data from one workbook and pasting the data into another workbook depending on certain criteria (using autofilter) using excel VBA. For only One column i need to multiply data by 100 (i.e. convert it into percentage) For example column A in source worksheet has all values and i will paste it in column D of target worksheet. But before pasting i need to multiply the data by 100 so column D in target worksheet has values in %.
View 3 Replies View RelatedI am using 'Dim' to define a string for SheetName, a variable.
I have tried with no success various ways to try and paste data to a sheet with this variable.
I know the variable is correct as I am using it to make a new sheet then rename it and also move it.
I have a range that changes the data constantly, I have to watch that data changing. I am trying to work on a macro that copy that data and paste to another sheet. What would be the code to find the next empty row and paste my data there.
Data is in Sheet1, range A17:E32... and it needs to be pasted in sheet2 starting in F2.
I'm trying to implement a very simple macro to paste a set of cells - already copied to the clipboard from a CSV file - into a worksheet.
Basically, all I need it to do is to allow the user to open that other CSV file, hit CTRL+A and CTRL+C, then go to the relevant sheet in my workbook and run the macro, which should simply paste the copied data into that sheet (starting at cell A30).
Here's what I have so far - I keep getting an error when the macro reaches the ActiveSheet.Paste command.
VB:
Sub UpdateData()
'
' UpdateData Macro
'
Dim strSheetName As String
[Code]....
I am trying to secure a worksheet using data validation. I want to prevent users pasting over data validation fields, however I want to allow users to be able to still use the copy/paste feature as long as the data is valid.
Attached is a sample that I found on the forums. The current code does not allow any paste functionality.
Paste Restriction on Validation Cells.xlsm
Macro (see below).
I have two sheets 1) ap modified 2) gl download
It's merging the two sheets together. however, it's pasting over the last row of data. For example, gl download has data from row 4 to row 100. The Macro is pasting data from ap modified starting in row 100 of gl download instead of row 101. How can i correct this?
Sub C_Merge()
Dim w1 As Worksheet, w2 As Worksheet
Set w1 = Sheets("ap modified")
Set w2 = Sheets("gl download")
Dim lr1 As Long, lr2 As Long
[Code] .........
I work in a correctional centre. Some of the correctional officers have
little training to use Excel or other programs, but are required to complete
spreadsheets on line. Although we have heavily protected the worksheets and
locked cells, we find that in some cases the staff can still mess up the
worksheets by copying and pasting data inappropriately.
Is there a way to turn off the ability to paste data into the worksheet, and
to force each field to be completed manually? This would eliminate the
problem.
I am trying to paste a single cell value to a range that will vary according to row counts in two different columns. I'm pasting in column B so I want to use .Range("B" & BRowCount) as my starting value. I then want to paste the value down column B until I reach the last used row in column C (i.e., .Range("B" & CRowCount)). None of the paste range code that I am trying seems to work.
Code:
With CS
BRowCount = CS.Range("B65536").End(xlUp).Row
BRowCount = BRowCount + 1
.Range("B" & BRowCount).PasteSpecial Paste:=xlPasteValues
.Range("B" & BRowCount).Copy
CRowCount = CS.Range("C65536").End(xlUp).Row
'---->Paste Code Inserted Here
End With
I use the code below to copy formulas to the bottom of the data in a spreadsheet so I know how to do this with a formula.
I have a need to do the same but with a text string that I define.
No conditions, just normally need to copy the text from the cell 2 of a column down to the last row where data is in any column (Usually being col A).
Code:
Dim Last_Row As Long
Application.ScreenUpdating = False
Last_Row = Range("A" & Rows.Count).End(xlUp).Row
Range("S2:S" & Last_Row).Formula = "=b9/a9"
Application.ScreenUpdating = True
I have 10 pages of data in a word document.
Can i write a macro,
to copy Word Page1 in excel sheet1 cell(J2),
to copy Word Page2 in excel sheet1 cell(J3)
to copy Word Page3 in excel sheet1 cell(J4)
.
.
to copy Word Page10 in excel sheet1 cell(J11)
How to paste data into a sheet that is filtered, so that only the filtered rows get populated?
I am using paste special values but it is populating every row in between despite them not being filtered.
I want to create a function called PasteGrid(SourceRange As Range, GridHeight As Integer, GridWidth As Integer)
What this will do is take a long single row or column of data and paste it into a grid with a defined GridHeight and GridWidth, I have came up with the below so far:
Code:
Function PasteGrid(SourceRange As Range, GridHeight As Integer, GridWidth As Integer)
Dim rRange As Range
Dim rCell As Range
Dim DestinationRange As Range
Dim GridWidthCount As Integer
Dim GridHeightCount As Integer
[Code]....
Something appears wrong and when following the code when it hits this line:
Code:
Cells(Destination.Row + GridHeightCount, Destination.Column + GridWidthCount).Value = rCell.Value
The function just stops and I'm not too sure why?
i have data on the left; a Ref number.. A0, A1, A2 etc etc and each of these has an associated 'output'
What i need to do is have the ability to input random numbers (like in column E) then hit the macro and it put in the ref code next to it
so far i have the following which only goes as far as shown above..
it errors and doesn't complete the list
Sub find_paste()
Dim output As Variant
For counter = 5 To 10
Set output = Range("E" & counter)
With Worksheets("data")
Range("B5:B13").Select
Selection.find(What:=output, After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False _
, SearchFormat:=False).Activate
ActiveCell.Offset(rowoffset:=0, columnoffset:=-1).Copy
output.Activate
ActiveCell.Offset(rowoffset:=0, columnoffset:=1).PasteSpecial
End With
Next counter
End Sub
When I've use the filter in excel, I can't seem to cut and paste/copy and paste the filtered data to another area. When I try to, it cuts/copys the entire data range, not the filtered one.
View 4 Replies View RelatedI have got a workbook with 20 or more worksheets. Every quarter I need to paste/append new data on these worksheets (which has already got existing data from previous quarters). All worksheets have different rows of data, for eg One worksheet may have 10rows, the other may have 50. Hence when I am writing my code, I cannot specify the destination cell as for eg A11, or A51.
How do I write up a VBA code that looks for the last row of data on these various worksheets and then pastes the new information on the next row(new row).
I'm trying to keep some basketball stats, and from ESPN the field goals are reported as 10-16, or 5-14, to indicate how many field goals were made out of attempts.
When I paste this into Excel it automatically interprets it as a date. So 10-16 turns into Oct-16, and 5-14 turns into May-14. How do I stop this?
Ignore the screenshot!
My project requires working with 3 different files, in my example here: Delivery Status, Warehouse, and Clients. Delivery Status is the master file where the information is gathered at first. Then when the product arrives, from the column "AI" I choose the Destination which it could be a warehouse or client. So far the code that I have can paste the information in different sheets within the File Warehouse, but can not make the difference between the File warehouse and the file Clients.
In the Delivery Status file I can choose from the Column AI whether the destination is a warehouse or a client and I need Excel to paste the information in the proper file. Have in mind that I have a lot of sheets in both files. I am attaching an example files with the code.
I wanna copy and paste the data -- visible cells after I filtered data. How can I do that.
View 2 Replies View Related
