Is it possible to change the behaviour of the return button within a textbox? What I would like is, once the return button is pressed, it starts a new line in the textbox rather than it moving to the next textbox within the form.
View 3 Replies
I am making a template for my company to automatically calculate the amount of sheet metal needed for a specific job. The spreadsheet could get very long depending on how much duct is needed. Is there any way I can automatically insert rows to the end of the sheet by pressing enter after filling the last row with data, which would then move the totals down. Also, the formatting of the rows I wish to add need to be copies of the ones above.
View 3 Replies View RelatedI believe this is a little basic for this forum; but, I haven't been able to find a good answer just searching the web.
I have a spreadsheet that I am entering single digit numbers in each cell. I would like the cursor to automatically jump to the next cell to the right after the number is entered (without having to hit the right arrow key).
I am working on an excel sheet that asks the user for a Start and End value, to create a print selection. It should then loop all of the numbers between both values into Cell B1, update the sheet and print the page each time.
I think i have the VBA code worked out, except for the fact that i seem to get stuck at the loop action for printing all values between the 2 input values ( i don't really know how to do this).
I have an example of the file uploaded here: Zippyshare.com - Printbarcodes-test.xlsm
Here is the code i am using (the loop/selection part is still missing):
Code:
Sub PrintSelection()
Application.ScreenUpdating = False
Application.DisplayAlerts = False
[Code]....
As you can see the code below, everything is the same, except
template(x).xls
where x is 1,2,3 and so on.
it'll look through every template(x).xls workbook in the same folder?
as an additonal question, when I use the below on a new worksheet, it starts at line 2, is there a way to start at line1 or line 5?
how to write a new line to a csv file? Or how to write a "Character return" to the file? I use the following code to write a line but I don't know the command to start a new line. Write #1, "abc",
View 2 Replies View RelatedHow to set up a Inputbox to make the user pick the start line and end line for a loop
the sheet will have items on it numbered 1,2,3,etc I want a process done to the lines the user selects by item number not cell range.
line 4 to line 20 for example.
I am reporting on the amount of certificates issued over a period of time. Basically the government stopped released data on the amount of one type of certificate being issued during this period and started releasing data on another type. I am having trouble displaying this other data which starts around half way into the time period. So all the data starts in June 2010... but this other data starts in June 2012.
View 3 Replies View RelatedWe're trying to use one template to enter data with users being able to start entry from a number of different starting points. this changes they way the look-ups have to work. The attached sample explains it a whole lot better.
View 2 Replies View RelatedI am creating a macro that will take some information from 3 cells that the user will input, place it into 3 different cells, clear the original 3 cells and then I would like the macro to, when next activated input the new information from the 3 cells below the information that was already in the table.
For Example,
Date (D3), Description (E3, F3, G3 Merged cell) and Reference (H3)
I would then like those 3 cells to be put into A9:E9 then clear the original cells. That is not the part that I have the problem well, the following however, is.
After I enter new information into the input cells, and press the macro button, I would like the information to be placed into A10:E10 and from then on, the information goes down by 1 row after each macro.
I know Excel is not the best tool for formatting sentences, but is there a way to insert a Line-Break based on a condition? (Either using Formula or VBA).
The situation is:A fixed-width cell, is a concatenation of 5 strings. Each of these 5 strings is a small sentence of 3-6 words; individually much smaller than the cell-width.2 of these 5 are fixed (one at start, one at the end). The other 3 are results of their respective "IF" formulas.Hence, the final sentence wraps over 2-3 lines.I need the 3rd & 5th sentence (the whole sentence, all 3-6 words of it) to start in a new line, only if they are going to be wrapped into two lines.
So If the wrapping results in:
String1 String2 Stri
ng3 String4 Stri
ng5
Then change it to:
String1 String2
String3 String4
String5
On the attached example i have a user form (click Add New Hedge button) and on this form is a textbox for 'Avg. Price'. The value of entered from this box will go into the next available row in column on 'Unsettled Hedges' worksheet.
My problem is sometimes i would to enter the price as a fraction, e.g. 1/2 and other i would like to enter the price as a decimal, e.g. 1.5. At the moment if i enter the price as a decimal figure this will convert it to a fraction in column D of the 'unsettled hedges' worksheet.
What do i need to change in my code to make it enter the price in either format?
I have a form, and the form has a textbox. I have a button labeled search, and when it is clicked the macro searches for the information in the text box. How do i make the search action begin when the user press'es the enter key while on the textbox?
View 4 Replies View Relatedhow can I load a text box where the user can push enter and go to another line? That would be like a comment box. If I put the traditional text box, I can only write in the first line and enter doesn't work. Is there a way to program it, where it would work?
View 2 Replies View RelatedOne has around 129 lines for the first years 2006 in sheet1.
The other links to the first 129 rows. Then I've linked the top 129 in sheet2 130 down for 2007 and so on for 5 years.
How would I add a line in Sheet1 then would insert 5 lines in sheet2 keeping the same order.
e.g
Sheet1
Name Rev Year
John £120 2006 Row 5
Jack £150 2006 Row 6
Sheet2 (linked)
Name Rev Year
John £120 2006 Row 5
Jack £150 2006 Row 6
John £130 2007 Row 134
Jack £160 2007 Row 135
John £140 2008 Row 263
Jack £160 2008 Row 264
John £150 2009 Row 392
Jack £170 2009 Row 393
John £155 2010 Row 521
Jack £180 2010 Row 522
The Rev changes by formulas in Sheet 1
i have 15 textboxes in my userform (all with tags).
instead of having 15 seperate sub routines that call on one macro is there a way i can write some code that, on entering any texbox within a form, a specific routine would be called
i tried using the Userform_click sub like so, but with no joy:
I have text that when you push enter it goes to the next line and when you push tab it goes 5 spaces to the right the problem is...
When i have a lot of data it goes out of range and not all of the text is shown. I want to limit what is written to the size of the text box no matter the size or type the font is you can only type where you can see inside the textbox.
I have a userform with several texboxes formatted as currency. The problem I have is that I cannot enter figures less than £1.00 i.e. (.90) whicch should format as £0.90
Here is the code I am using so far! As I have said it works perfectly apart from this ...
I was wondering, is it possible to execute my VBA sub from textbox1 using the enter key?
View 3 Replies View RelatedI am having trouble using User Forms.
I am trying to enter data using User Forms to apply to a specific cell.
For example the user enters text or a number value into a text box and clicks a command button to submit that information into a specific cell. In this case D43.
I have a very long spreadsheet with about 3000 rows. lets say for simplicity that column A contains a list of product ID numbers. I am looking for some macro code where I can just type in the product ID into a textbox, then hit enter (or a 'go' button) and then the cursor will move to the cell containing the part number.
I know Ctrl+F will do the job for me, but because of the frequency that I do these searches, a text input box would be easier still.
The nearest solution I could find was the one here Find text but its a bit 'overkill' for my needs.
In my userform, I have a textbox where I enter a number.
When I hit the return key in the textbox, I want the userform to act like I hit a commandbutton_Click. (The commandbutton_Click takes the contents of the textbox and locates a line with that number in it in a specific worksheet, and then displays the line of info in other textboxes in the userform).
I have not been able to figure this out.
I have a userform with a textbox in it. Once you type what you want in the textbox, you click on one of two buttons - either Accept or Cancel. It would be much neater if the userform would close when the user hits the carriage return in the textbox. Anyone know how this can be achieved? Kjartan Auto Merged Post Until 24 Hrs Passes;Doh never mind folks, I figured it out...
Private Sub Userform1Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Userform1.Exit
End Sub
I have a userform that has two comboboxes to search data on a sheet and a textbox to input data to a specific cell on the same sheet. The cell that the textbox writes to is determined by the combination of choices selected in the comboboxes. The comboboxes are searching as required but I don't know how to determine which cell to write my data from the textbox to. I'll attempt to clarify...combobox1(drivename) searches the data in column C, combobox2(unconformlist) searches the data in column H. The combination of these determines a specific row and I need to write data from the textbox(initials) into this row in column M.
Private Sub CancelButton_Click()
Unload Me
Sheets("Index").Select
End Sub
Private Sub initials_Change()
initials = UCase(initials)
End Sub
Private Sub OKButton_Click()
Dim ws As Worksheet
Set ws = Worksheets("QAQCconformity")...................
I have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls‎
I'm trying to enter text (the Assessment Number) into a website text box. the site is Solano County - Online Tax Information the relevant section of website code is
My code is
Sub Solano_View()
Dim IE As Object
Dim url As String
Dim tags As Object
Dim tagx As Object
Dim parcel As Object
[Code]...
This is creating Run Time error code 438 I've also seen Run time error code 91 while trying other methods
I have also tried getElementById() without sucess
Does this have something to do with tables or java?
Should I be using $("#id") I don't know how to use this though.
i would like to create a userform with a textbox to enter a product code , a command button to run VBA and a big text box to show output of VBA from Textbox 1 which i will connect to DB and pull back information relevant to that product code , is this possible i can create the userform no problem and already have code to pull back from DB into Excel ,
View 9 Replies View RelatedI have an userform with a textbox (MultiLine property is 'True'). The question is how to move to new line in a textbox by pressing 'Enter'.
View 2 Replies View RelatedI need to add extra text line in textbox by Toggle Button or checkbox. The problem my extra line every time I select it makes extra lines
View 5 Replies View RelatedOn my userform, when a command button is clicked, then a textbox gets filled in the the answer. How do I insert line breaks in the answer? For instance:
AnswerPart1
AnswerPart2
Instead of: AnswerPart1AnswerPart2
I tried .value="AnswerPart1" & Chr(10) & "AnswerPart2" but then all the text box displays is AnswerPart1 (the symbol for paragraph) AnswerPart2. It doesn't actually break the line.
