Start New Line In CSV File
Aug 26, 2006
how to write a new line to a csv file? Or how to write a "Character return" to the file? I use the following code to write a line but I don't know the command to start a new line. Write #1, "abc",
View 2 Replies
ADVERTISEMENT
Jun 19, 2008
As you can see the code below, everything is the same, except
template(x).xls
where x is 1,2,3 and so on.
it'll look through every template(x).xls workbook in the same folder?
as an additonal question, when I use the below on a new worksheet, it starts at line 2, is there a way to start at line1 or line 5?
View 14 Replies
View Related
Feb 23, 2013
I have the data to import / read in a pdf, in a doc, or in an Excel worksheet whichever is easier to use. I need to import the data, parse it into the correct cells for that row and then repeat the import until the end of the file. Not all the cells are in each group of data to import, so those cells will be null for that row. Some of the data for one cell may be in up to 14 lines in the data file. I have be concatenating these data rows into one cell. There are 48,000 lines in the file to import or I would do this manually. I am assuming that doing this in VBA would be the most efficient method.
View 11 Replies
View Related
Jan 13, 2014
I am reporting on the amount of certificates issued over a period of time. Basically the government stopped released data on the amount of one type of certificate being issued during this period and started releasing data on another type. I am having trouble displaying this other data which starts around half way into the time period. So all the data starts in June 2010... but this other data starts in June 2012.
View 3 Replies
View Related
Nov 8, 2006
Is it possible to change the behaviour of the return button within a textbox? What I would like is, once the return button is pressed, it starts a new line in the textbox rather than it moving to the next textbox within the form.
View 3 Replies
View Related
Apr 24, 2009
when I link cells from one file to another and insert a new line on the file I am linking to. the file that is linking goes down as follows:
=Safety.xls!$A$5
=Safety.xls!$A$6
How do I get Cell A5, to link to Cell A5 even if I add a new line in the Safety.xls spreadsheet. Taking the $ away does not work I have tried that.
View 3 Replies
View Related
Oct 28, 2009
i have a spreadsheet with the following worksheets:
"Data Entry" (sheet 1)
"Menu" (sheet 2)
"Username" (sheet 3)
In username the range a2:b5 contains the following:
a2= John b2=Write
a3=Scott b3=Readonly
where John or Scott are usernames in Environ("Username")
Is it possible to write a macro that does the following:
1. When the file is opened it looks at the network username and checks again the Username range in sheet3, if it is Write then the user can change cells in Data Entry and save the workbook, if Readonly then they can only view and not save, and if not there at all, then the worksheet closes.
2. When the file is opened write a log in a hidden sheet callled "Log" of the time opened and the username
3. Is it possible to do the same but making a copy of all cells changed ??
View 3 Replies
View Related
Aug 15, 2012
I have a delivery time programm (clients to be delivered the next day) which I would like to run every night at a specific time. Is there any MS tool to trigger the Excel file? Or do we have to use the "old" batch file ( if yes, pls send example)?
View 2 Replies
View Related
Sep 28, 2008
I use an image analysis program ImagePro which can call Excel within it's macro language (which seems to be visual basic). I looked up on this site how the change the drive (ChDrive command). But still when the Excel section (after With oExcel) executes the default file location in the browser is in My Documents on the C: drive.
Prior to this code Excel has been launched by this ImagePro macro, and a file Cumberland Template has been opened from the C: drive. Now I would like to do a Save As, but have Excel start at the I: drive location.
View 7 Replies
View Related
Jun 21, 2009
I've download the CSV files from my bank. Somehow I thought they'd import painlessly. I dunno what's happened, these files are bloody ridiculous to look at.
Somehow I've ended up w/ Date, then Amount in the cell under it, then a description of what I bought in the cell below, and then something to the cell to the right of it (a further description sometimes, at other times nothing).
I have about 1500 lines of this so doing this automatically is not in question. I want to figure out how to run a macro to organize this. The logic is fairly simple. Where-ever the cursor is, copy the stuff in there over 2 lines, go back to original starting point, copy next cell, paste it next to where i previous pasted, goto third line, copy, paste next to second place i pasted, and then goto next set of data/dates. So I did that once figuring it could keep repeating the cycle. NOOOO that didnt happen. I did this for one set and then just stopped. Everytime I run the macro it deals w/ the same data. For example I created the macro to start of w/ cells A2, A3, and A4, then goto A6 and stop. I figured once there I could run the macro again, and it would do the same stuff for A4, A5, and A6 that it did for the previous one. Nope, it went back to A1-3.
Of course if someone can give a better idea of how to work w/ CSV in the first place that would also help. It just never made the colums in the right place. I got to choose the variables that would decide when a new column starts but I was never really getting the result I wanted. If this macro works though I wont need to work w/ that anymore.
Here's a sample though of how my CSV looks at the moment. These are three entries. The first one's description takes up one cell, the next 2 have 2 cells each.
D06/13/2008
T-20.00
MABM WITHDRAWAL
^
D06/16/2008
T-26.25
MMISCELLANEOUS PAYMENTS Good Life
^
D06/16/2008
T-25.00
MPOS MERCHANDISE AMC MISSISSAUGA
View 6 Replies
View Related
Dec 17, 2012
i have batch file that run from VBAexcel But the thing is i dont want to run batch file
i want everything on VBA . for example you use vba to cmd and then run this line of command
i have try but i just new to VBA and programing
how can i do it
here the code
this is from batch
Code:
@echo off
>summary.txt (
for %%F in (*chkpackage.log) do findstr /l %1 "%%F" nul||echo %%F:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A:N/A
)
and this is code in vba
Code:
FileSet = Sheet1.Range("C13")
txtFpath = Sheet1.Range("C7").Value
FilePath = txtFpath & "
es.bat"
[Code]...
i have to admit that i'm really not good in programing if you can add some explaination is a great thing for me to try to study
View 1 Replies
View Related
Jan 1, 2007
Say there is a HTML file at C:DataFile.html
I'd like to use Excel VBA to write this meta tag into that HTML file:
****** http-equiv="refresh" content="600">
That's to make it refresh every 600 seconds.
The most elegant way would be to locate the "head" tag and write it right after it, but the refreshing meta tag seems to work where ever it is, even at the very end of the file after the "/html" tag! So locating the "head" tag is not that important, if it's difficult.
So, how do I use VBA to write lines into a HTML (or any text) file?
View 9 Replies
View Related
Oct 26, 2006
I'm using the following code to read a text file that I downloaded from a mainframe file.
Do While Not EOF(FileNum)
Line Input #FileNum, myLine
Debug.Print myLine
Loop
It reads and prints the first line, but then drops out of the loop. According to the help file, "Line Input" is looking for a carriage return (Chr(13)) or carriage return–linefeed (Chr(13) + Chr(10)) sequence. I have pasted a sample of the text file below. I'm not sure what the characters are at the beginning of each line, but perhaps I could find a way to replace each of them with a carriage return.
SAMPLE:............................
View 4 Replies
View Related
Mar 28, 2007
I am using Chip Pearson's example of importing text into my worksheet.
Sub ImportTestFiles()
ImportTextFile "C:Documents and SettingsKevMy Documents est.txt", ","
End Sub
Public Sub ImportTextFile(FName As String, Sep As String)
Dim RowNdx As Long
Dim ColNdx As Integer
Dim TempVal As Variant
Dim WholeLine As String
Dim Pos As Integer
Dim NextPos As Integer
Dim SaveColNdx As Integer
Application. ScreenUpdating = False
On Error Goto EndMacro:
SaveColNdx = 1
RowNdx = Range("A65536").End(xlUp).Row + 1
Open FName For Input Access Read As #1 ...
View 3 Replies
View Related
Jun 19, 2007
I use the Append command to write a line to a text file. I have about 3 excel files appending data to the same text file.
If someone were to write a line in error I would like to have the ability to delete it.
View 3 Replies
View Related
Dec 23, 2008
I want to read in a space delimited file and to put each line in one cell starting with cell B2 (I will take care of splitting it into columns later). However, rather than reading one line at a time, it reads in the entire txt file at the first pass......
View 5 Replies
View Related
Feb 9, 2012
Set FSO = New FileSystemObject
Set FSOFile = FSO.OpenTextFile(textfullname, 2, True)
FSOFile.Write ("xx")
FSOFile.Write ("02022012")
FSOFile.Writeline ("Next line")
I am getting this in the text file:- xx02022012Next line
I want this: xx02022012 Next line
How to change line when writing to a text file?? the writeline is not changing line.
View 1 Replies
View Related
Apr 6, 2008
I'm trying to do this in VBA.
I open a text file for input, and I want to jump to a certain line # in that text file. The difficult part is that each line has variable length, so I can't use the Seek function.
The data look like this:
1,2,3,4
555,666,777,888
99,00,11,22
... etc.
View 7 Replies
View Related
Aug 30, 2006
I wrote a Macro that was running up to now searching for information. Now the text file is bigger than the 65536 limit in Excel. How can you import the .txt file over two or more Sheets using a Macro?
View 2 Replies
View Related
Apr 14, 2008
In VBA, is it possible to write to a text file, on 1 single line (without carriage return or line feed) the values of a dynamic array? For instance, I have the array:
Dim my(n) As Double 'n is changeable
my(0) = 0
my(1) = 1
my(2) = 2
.....
I want to write to a text file, like this: Write #filename, my(0), my(1), my(2) '..... until my(n) but n is changing
I want them on 1 line, because I use the other direction (up - down) for other things).
View 2 Replies
View Related
Mar 27, 2014
A database spits out a 42-column (A-AP) and 3,000+ row csv sheet of raw data with column headers. Frequently (due to improperly inputted information), there is a random line break in the middle of a cell, resulting in data that should be in columns Q (or R or S) - AP winding up in columns A thru Y (or Z or AA).
The only data that is consistent is in column AC.
Basically, I need to delete any blank rows and pull the incorrectly wrapped data up to complete the row where the split occurred.
Upon examination of the csv file in Word, there are instances of improperly placed paragraph marks (^p), which can easily be searched and replaced—in Word (by replacing each column A data with a unique character and the same data, deleting all paragraph marks and then replacing the unique character with a ^p.
Firstly, I'm not sure how to accomplish this same task in Excel and secondly, doing so brings the data into the proper rows but it doesn't fix the varying number of blank cells. Simply deleting blanks and shifting left doesn't work because the split often occurs in the middle of a cell which would require concatenating. But I would be ok deleting the latter part of the data so the columns align if need be.
In the attached example sheet, I highlighted the relevant data and what needs to be aligned. There is an ideal and an acceptable version in addition to the initial way the csv imports.
Example.xlsx‎
View 3 Replies
View Related
Jul 9, 2014
I created the following macro by recording the macro and going through the steps manually, however I need to make some changes and can't seem to accomplish what I'm trying to do.
The Macro opens a master inventory file, creates a new line, and then links certain column cells in the inventory to corresponding places within the original form (the macro is executed from the original form once it's completed).
Problem is, the macro is written using the form "template" so whenever I save the template as the name of the unique item, it won't update the macro language as well.
What I'm trying to accomplish is when someone opens the template, the save immediately with a different file name, and once the form is completed and the macro is run, it's creating the new line in the inventory pointing to that specific file.
I thought somehow utilizing ThisWorkbook within the macro instead of explicitly using something like
"='[Control Sheets (JOHN TEST).xls]FUND SET_UP PG_1'!R2C3" would accomplish what I'm trying to do.
View 5 Replies
View Related
Sep 11, 2007
If I write a multi-line text in a cell (then go down with alt+enter) and after copy the cell pasting on Notepad, it display before inverted commas and after textual content.
Instead, if I select directly the content from the formula bar, it isn't happen.
Do exist a way for copy and paste directly from the cell without select from the formula bar?
Maybe with a macro?
View 5 Replies
View Related
Apr 16, 2009
I have a spreadsheet, in which I need to lookup invoice numbers from a raw data file with ~5,000 line items on a daily basis. The lookup is based on two criteria searches (1) search product type (2) search product make. In this example, I have 4 product types:
1 – car
2 – truck
3 – boat
4 – motorcycle
For this example I want to search invoices; (1) first search for cars only (2) search for product make. In my attached example, the first item (cell E2) would return invoice number 7147875-FRD from the raw data file. The second item (cell E3) would return invoice number 7147877-NSN.
View 2 Replies
View Related
May 21, 2007
I have embeded a PDF file in an Excel Worksheet. When I double-click to open the PDF file the I get an error message: "Cannot start the source application for this object." However, the pdf file opens anyway. how to prevent the error message from displaying (without stopping real error messages)? (...happens in Excel 2000 and Excel 2003) NB: I researched this site first - user "Ed" raised the same issue 27/1/03 - but it doesn't appear to have been resloved.
View 4 Replies
View Related
Dec 23, 2009
I have the following code (that I borrowed) and was using it to export some worksheets to a new workbook. It worked fine for about 4 times, now it says it can't find the file path and stops on the "MkDir FolderName" line.
View 2 Replies
View Related
Nov 17, 2012
Our small family business has a mailing campaign that we track with excel. However, we're very concerned about users opening the macro-filled master spreadsheet. Instead, we'd like a macro to do everything for them.
When a letter comes back in the mail with a bad address, the user types the Street number and street name such as "1234 Main St" into $A2 of c:dropbox eturned.xlsm, presses the macro button, and it should do the following:
Opens and Searches "Sheet1", "column S", in the file c:dropboxmaster1.xlsm, and finds the LAST instance of the address typed.Selects that entire rowCopies the entire row.Pastes the contents into the row of the active cell in the destination spreadsheet, overwriting what was there before. Such as $2:$2 if the address was typed in $A2.In the master1.xlsm spreadsheet, sets the entire copied row color to "gray".closes master1.xlsm and saves changes.
The end result is that the user now has an identical row of information in their spreadsheet, and the master spreadsheet's row is colored gray indicating it has been completed.
Other notes:I'm open to more efficient steps than this if you have them.There are approx 5,000 records to search through in master1.xlsx at any given time.
View 5 Replies
View Related
Mar 30, 2013
I have about 180 workbooks which I need to compile into a Master Schedule.
All the tab 1's are different, these feed into tab 2, which the data has the same formatting throughout. The 2nd tab has the same data for A:F 1 but cells A:2 - F:2 down to row 9 are populated from tab 1, therefore different in each. I am trying to get a Master schedule that lifts the data in the fed cells into a line by line spreadsheet?
Is there a way I can get excel to look at a folder, then every workbook in it, the at the 2nd tab in every workbook, then list the cells as described above? I am not after a consolidation of this data, but a full list?
View 1 Replies
View Related
Aug 5, 2014
I'm trying to combine 2 cells that both have text on multiple lines separated by line breaks. I want to keep the formatting so that when both cells are combined, line one from cell 1 and line 1 from cell 2 are on the same line in the new combined cell. This is easy to do when there is only 1 line in each cell but how do you do this for cells with multiple lines? Here is an example of what I am trying to do:
A
B
C
1
First Name:
Last Name:
Address:
John
Smith
123 Harold Street
First Name: John
Last Name: Smith
Address: 123 Harold Street
View 7 Replies
View Related
Aug 20, 2014
I need to read or clear all the line in specific range which will be increasing dynamically. Problem is "Selected File List" table range is not specified. New file chosen with browse will be added to "Selected File List" dynamically. Number of file can't be predicted.
vbaStk.JPG
What I've tried so far is, keep track of the browse button click and add the file path to arraylist. After that, (Row number 9 which is start line + arraylist size) to get the number of line of end of the table. But due to some requirement, I want to read the file from excel file. Something like -Read until found blank line or border bottom or something.
I'm new to VBA and I'm not so sure what I'm doing with vba codes
View 1 Replies
View Related