I have a userform with several texboxes formatted as currency. The problem I have is that I cannot enter figures less than £1.00 i.e. (.90) whicch should format as £0.90
Here is the code I am using so far! As I have said it works perfectly apart from this ...
I am looking to write a small macro to convert all figures on a page to either EUR or $ at the click of a button
View 5 Replies View RelatedI have a textbox on a form that has a default value of 0.00. When the user enters a number I want it to format it to currency with two decimal places. I've tried form.textbox1.text = formatcurrency(textbox1.text,"0.00") but it won't format it to two decimal places.
View 2 Replies View RelatedI need to be able to format a textbox as curancy. Simple enough, right?
The problem is that this box is loaded from two sources. The first is automatic using the change event, this works well. The second is to enter directly into the textbox, which requires using the exit event, this also works.
The problem comes when I try to use both events. The change event interfers with the direct entry (the format keeps changing the entered value and will not allow the user to finish entering).
Private Sub TextBox1_Change()
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
Private Sub TextBox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
TextBox1.Text = Format(TextBox1.Text, "$ #,##0.00")
End Sub
How can this be changed to work for both aut load and direct load?
how I might assign the $ Currency property to one of my textboxes in my user form. I was hoping I could set the property in the spreadsheet and the form would inherit what properties the cell in the spreadsheet had but that did not work. Here is the line of code I tried to use to assign the property to the cell (TextBox 16 is the one I am trying to change)
Set c = Worksheets("database").Range("a65536").End(xlUp).Offset(1, 0)
Application.ScreenUpdating = False ' speed up, hide task
'write userform entries to database
c.Value = Me.TextBox1.Value
c.Offset(0, 1).Value = Me.TextBox2.Value
c.Offset(0, 2).Value = Me.TextBox3.Value
c.Offset(0, 3).Value = Me.TextBox4.Value
c.Offset(0, 4).Value = Me.TextBox5.Value
c.Offset(0, 5).Value = Me.TextBox6.Value
c.Offset(0, 6).Value = Me.TextBox7.Value
c.Offset(0, 7).Value = Me.TextBox8.Value
c.Offset(0, 8).Value = Me.TextBox9.Value
I have a Userform where i have the user in put a dollar amount in a text box. Im having difficulty getting this assigned to a variable as an integer. I get a "type mismatch" error. I have tried declaring the variable as an integer, and tried the cint() function, but i get the same error.
View 3 Replies View RelatedWhen I enter a number, say 2456 in this textbox why does it display "$2.45" instead of "$2,456". I've tried fiddling with the ###'s and .'s but it just gets worse.
[Code] ....
I would like to create a textbox that displays the typed numbers as currency format (similar to selecting currency format for a cell)
so that as the user types in 9999 they will see the textbox populate with
$99.99 instead of just $9.09 which is what happens when I try the following code
I have a userform where the user enters prices for up to 12 items in textbox controls, and these prices are stored in an array. The textboxes are titled tbPrice1, tbPrice2, etc. I'm having an issue with the line of code I am using to store the values in an array. Every time I attempt to store them, I get runtime error 13 type mismatch, but I don't understand why.
dim PartPrices(1 to 12) as Currency
For x = 1 to 12PartPrices(x) = IIf(Trim(Me.Controls("tbPrice" & x).Value) & vbNullString = vbNullString, CCur(0), CCur(Trim(Me.Controls("tbPrice" & x).Value)))Next
A little more explanation here. Not all 12 parts will have prices, so I use the IIf statement to store the value 0 whenever the user has left a price field blank. I use trim in case they leave spaces in the price textbox or something. When the field is not blank, I take the value entered in the textbox, convert it to currency and attempt to store it in the relevant element of the array.
On the attached example i have a user form (click Add New Hedge button) and on this form is a textbox for 'Avg. Price'. The value of entered from this box will go into the next available row in column on 'Unsettled Hedges' worksheet.
My problem is sometimes i would to enter the price as a fraction, e.g. 1/2 and other i would like to enter the price as a decimal, e.g. 1.5. At the moment if i enter the price as a decimal figure this will convert it to a fraction in column D of the 'unsettled hedges' worksheet.
What do i need to change in my code to make it enter the price in either format?
I have a form, and the form has a textbox. I have a button labeled search, and when it is clicked the macro searches for the information in the text box. How do i make the search action begin when the user press'es the enter key while on the textbox?
View 4 Replies View RelatedHow to make EXCEL 2007 Automatically convert all my CURRENCY symbols in all cells formatted for CURRENCY in THE SAME SHEET to the one and ONLY currency selected in JUST ONE cell ? (i mean, after conversion, all of them are Not just display currency symbols, but Calculable monetary values like regular Excel's built-in currency format)
I am a dummy in VBA so I really am not familiar at all if the solution is really one of VBA. I don't even know how to start programming VBA at all in Excel.
i have 15 textboxes in my userform (all with tags).
instead of having 15 seperate sub routines that call on one macro is there a way i can write some code that, on entering any texbox within a form, a specific routine would be called
i tried using the Userform_click sub like so, but with no joy:
I have text that when you push enter it goes to the next line and when you push tab it goes 5 spaces to the right the problem is...
When i have a lot of data it goes out of range and not all of the text is shown. I want to limit what is written to the size of the text box no matter the size or type the font is you can only type where you can see inside the textbox.
I was wondering, is it possible to execute my VBA sub from textbox1 using the enter key?
View 3 Replies View RelatedI am having trouble using User Forms.
I am trying to enter data using User Forms to apply to a specific cell.
For example the user enters text or a number value into a text box and clicks a command button to submit that information into a specific cell. In this case D43.
I have several rows which lists different currencies - USD, GBP, EURO, JPY etc.,
A1 usd 5000
A2 GBP 7000
A3 USD 3400
A4 EUR 12000
A5 JPY 89000
A6 EUR 1000
At the bottom I want to show the total of each currency separtely.
I have a very long spreadsheet with about 3000 rows. lets say for simplicity that column A contains a list of product ID numbers. I am looking for some macro code where I can just type in the product ID into a textbox, then hit enter (or a 'go' button) and then the cursor will move to the cell containing the part number.
I know Ctrl+F will do the job for me, but because of the frequency that I do these searches, a text input box would be easier still.
The nearest solution I could find was the one here Find text but its a bit 'overkill' for my needs.
In my userform, I have a textbox where I enter a number.
When I hit the return key in the textbox, I want the userform to act like I hit a commandbutton_Click. (The commandbutton_Click takes the contents of the textbox and locates a line with that number in it in a specific worksheet, and then displays the line of info in other textboxes in the userform).
I have not been able to figure this out.
I have a userform with a textbox in it. Once you type what you want in the textbox, you click on one of two buttons - either Accept or Cancel. It would be much neater if the userform would close when the user hits the carriage return in the textbox. Anyone know how this can be achieved? Kjartan Auto Merged Post Until 24 Hrs Passes;Doh never mind folks, I figured it out...
Private Sub Userform1Textbox1_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Userform1.Exit
End Sub
I have a userform that has two comboboxes to search data on a sheet and a textbox to input data to a specific cell on the same sheet. The cell that the textbox writes to is determined by the combination of choices selected in the comboboxes. The comboboxes are searching as required but I don't know how to determine which cell to write my data from the textbox to. I'll attempt to clarify...combobox1(drivename) searches the data in column C, combobox2(unconformlist) searches the data in column H. The combination of these determines a specific row and I need to write data from the textbox(initials) into this row in column M.
Private Sub CancelButton_Click()
Unload Me
Sheets("Index").Select
End Sub
Private Sub initials_Change()
initials = UCase(initials)
End Sub
Private Sub OKButton_Click()
Dim ws As Worksheet
Set ws = Worksheets("QAQCconformity")...................
I have a Challenge want to delete the row values in which serial no enter the textbox1.
Conditions:- find the Serial no. and delete the values except serial No.
Attaching file for reference : Example.xls‎
I'm trying to enter text (the Assessment Number) into a website text box. the site is Solano County - Online Tax Information the relevant section of website code is
My code is
Sub Solano_View()
Dim IE As Object
Dim url As String
Dim tags As Object
Dim tagx As Object
Dim parcel As Object
[Code]...
This is creating Run Time error code 438 I've also seen Run time error code 91 while trying other methods
I have also tried getElementById() without sucess
Does this have something to do with tables or java?
Should I be using $("#id") I don't know how to use this though.
i would like to create a userform with a textbox to enter a product code , a command button to run VBA and a big text box to show output of VBA from Textbox 1 which i will connect to DB and pull back information relevant to that product code , is this possible i can create the userform no problem and already have code to pull back from DB into Excel ,
View 9 Replies View RelatedIs it possible to change the behaviour of the return button within a textbox? What I would like is, once the return button is pressed, it starts a new line in the textbox rather than it moving to the next textbox within the form.
View 3 Replies View RelatedI want to enter a value in a textbox, search for it in an worksheet, and populate other textboxes with adjacent values if the value is found. Anyway, the problem is that if the value is not found, I get a debug error.
Dim test1
test1 = TextBox1.Value
Worksheets("data1").Activate
Find_Range(test1, Cells, xlFormulas, xlWhole).Select
TextBox2 = ActiveCell.Value
TextBox3 = ActiveCell.Offset(0, 1).Value
I'm sure there's far better code to do what I need, but I tried to keep it simple. With the above code, it only works if the value is found. If it's not, I get an error. So how do I make it so that if the value is not found, the value of the textbox2 is "Not Found" or something...
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I really know nothing about vba so here goes. I would like to enter data in a row with 4 cells of info. then hit enter and return to the first cell and move the row down. all four cells must have data entered. and all four must move down. i tried some code as below i found and i modified but it did not work as expected. this moved the row down when returning the cursor to A2. It also should not copy the data style of the top row.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Target.Column <> 1 Then Exit Sub
Application.EnableEvents = False
[Code].....
This formula must be confirmed with CTRL+SHIFT+ENTER not just ENTER. You will see { } brackets appear.
View 3 Replies View RelatedI need to indicate if the figures for this week has gone up or down compared to last weeks figures.
So looking at the attached, I need to add a column (I5) to sheet Admitted Patients WE 20081005, so it compares the % treated in <18 wks figure by specialty to previous weeks figures on sheet Admitted Patients WE 20080921.
Ideally I would love an arrow either point up if the figures has increased or down if they have reduced.