I've seen a lot of timestamp solutions but none of them fit my needs. Also my VBE skills are not good enough to create this. So here's the problem:
I've got 3 columns E,F en H. H contains a validation list with 3 options OK, NOK and OPEN.
If H is NOK I would like E and F to be blank. If H is OPEN I would like E to contain a start date wich doesn't update. If H is OK I would like F to contain an end date wich doesn't update.
I have a program that requires the last 8 days to be total, unless there are 2 days off in a row. So my cells need to sum the previous 8, but then stop when two zeros show in the column and then restart following. One zero should continue to total the previous 8 days. As shown below, for 1/10/14 I should see 57.5. The sum needs to restart on 1/13/14 to show a total of 10.5. I have tried multiple formulas with no luck.
Col A Col B
1/5/140
1/6/1412
1/7/1412
1/8/1412
1/9/1411
1/10/1410.5
1/11/140
1/12/140
1/13/1410.5
1/14/1411
1/15/1411
I have a link set up in an Excel document that plays a .wav audio file. The problem is it just plays the file. No media player comes up and I need to be able to manipulate the file when it is playing (i.e. stop, pause, play, Ffwd, Rew). Can someone tell me how to link the audio file up with a player? I am using a Windows based system. Unfortunately, Mac not available to me.
View 4 Replies View RelatedI'm currently creating an inventory tracking spreadsheet for my restaurant.
I'm using ="*"&A(x)&"*" to create the necessary barcodes. Some of my inventory numbers have leadings zeros that need to be included. The formula above is eliminating the 0's and how to get them to show. I've tried a custom number formatting but that isn't working for me.
I have a spreadsheet that has
worksheet_calculate and also worksheet_changes, its a combination of the 2...
and it's purpose is to make a record of the number every time it changes by populating it into the next row, so I end up having a very long data list
and what happens is that my spreadsheet has real-time data coming into one cell which makes it constantly changing....
needless to say, when my spreadsheet is opened, it starts to do it immediately...and it wont stop as long as the number keeps on changing.
I would like to make 2 buttons - one says START, one says STOP
and when I click on START, then it will start making record of this number and when I click STOP, then it stops recording the changes of this number.
I am attempting to create a datasheet to track the actual time an agent takes a break or lunch. Here is an example of the data that I am using.
name Date Lunch Sch Brk1 Sch Brk 2 Actual Time
BrandonHolt8/19/201411:10 8:30 1:20 8:24:20 Break
BrandonHolt8/19/201411:10 8:30 1:20 11:42:34 Break
BrandonHolt8/19/201411:10 8:30 1:20 12:57:46 Lunch
Because I have two break times, possibility of more depending on the agent, how do i create a formula that will look at this data, take the schedule time for say break one and only apply that against the time that is more in line with the closest actual time?
How can I make XL (2000) display the macro start/stop recording and relative/absolute box that used to appear whenever I started recording a macro?
Such an apparently simple issue, but I can't resolve it!
Somehow I lost this small box, and I know how to force it to display via customize, but it doesn’t seem to work the same (relative does not work as such) and the buttons or box disappear.
The company I work for does not use the usual calendar dates and uses a modified calendar. As an example, the month of January is Dec 31 thru Jan 27, February is Jan 28 thru Feb 24 and so on. I need to group data using a pivot table and summarize data by month, but as I just described above, calendar months will not work. Is there a way to modify what Excel sees as monthly dates?
View 9 Replies View RelatedI have a small project at work where I am being asked to put a simple spread sheet that will calculate a start/stop time - and also include the date. For example:
Start time 5pm, date: 3/13. The spread sheet to auto calculate what the stop time and date will be if a specific amount of hours is to be calculated. For example in this case, 12 hours. From calculating in my head that would be 5am the following day. However, how can I get this in excel to work and therefore all i would have to do is enter the start time and date, + 12 hrs, and excel would calculate the time/date after the additional 12 hrs.
I have this code :
[Code] .....
Great Timer. Have this assigned to a button to start, how can I work in a button to stop or pause this code from running?
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click()
Dim CB As Variant
For Each CB In ActiveSheet.CheckBoxes
CB.Value = False
Next
End Sub.......
As you can see below, I've written code that writes random numbers into three columns of a spreadsheet (10 numbers in each column).
What I want to do is create code that will run the random number generator for a period of 1 minute and then stop. I know that I will need to write a timer subroutine to do this but I'm how unsure how to do this.
I would like to know the easiest way to temporarily keep a worksheet code from running while I am editing, then turn it back on when I am done. I was thinking a button with these commands(?)>
Application.ScreenUpdating = False
Application.EnableEvents = True
but I don't know which button to use, or if I would need a button for each.
I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty
2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7
I have a timesheet where user updates start and end time for various tasks.
I have placed a time capture button in the excel sheet (which is simply a macro saying =now() function)
The user clicks it before starting and after finishing the task. The start and end times are captured in adjacent cells.
If the user starts the work, and goes on a lunch break say for 20 min, comes back finishes the task and captures end time, the time difference will not consider break time which is non productive.
How can I incorporate something like 'pause' option so that before he goes for lunch he can temporarily pause the time.
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find)
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Sheet1. Range("A1").Value = "" Then
MsgBox "Cannot print until required cells have been completed!"
Cancel = True
End If
End Sub
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedIs there a way to put a time stamp with the users name into an adjacent cell when a cell is updated?
In case that didn’t make sense I will tell you what I need this for. We are creating new time cards that require both employee and manager approval on them. We have many remote employees and getting their signature can be a pain. If they could click a button on the time card that stamped their name and time that would be ideal. They would then send to their manager they would click to verify the time and it would stamp it as well.
I would like to set up an Excel spreadsheet for conducting a time and motion study in a workplace setting where someone follows an employee around to document how much time is spent on a variety of activities. Since the person would have a mobile tablet PC to walk around with and track the data, I would like to capture 3 fields of information:
1) Category of function being performed
2) Start date/time of function
3) Stop date/time of function
For #1, I would like to have a drop down box that appears in each row of Column A with a predefined list (i.e. Activity A, Activity B, Activity C, etc.). For #2 and #3, I would like to create a macro that "timestamps" the current date/time when a blank cell is "clicked".
=IF(D2<>"",IF(A2="",NOW(),A2),"")
Whenever I type into field D2 it populates current date and time in field A2 and down the A column as I write into current D columns. The next step I would like to do in which he was able to figure out so far is how to lock in the date and time after something has been typed into D2. If I make any changes to the D2 field it updates the date and time, which I dont want to happen.
What formula would I use if I wanted this:
If A1 is greater than 1 then B2 equals the time that I entered a # in cell A1
Is there anyway to create a timestamp based of a cell linked to a Listbox? For example if the linked cell is in cell C8, cell D12 would stamp the time.
View 1 Replies View RelatedI am using the following code to add in an entry to the sheet named "Upload Log". I am currently using the "Now" function to input date and time. problem is everytime the sheet changes the formula changes and alters the times. I am trying to create a log of each time this code runs. so I have a record of it. This code seems to work but rather than placing the formula in the cell as I have written here, I just want the code to place the values that formula would place, but not the actual formula. How can I change this code to do that?
Code: ...
I have A column that has values 0 or 1 (product active or not).
I want to add into B column date when change occured (from 1 to 0) but simple NOW or DATE is not working becouse program works so that it erases/resets all values and calculetes tham again wich resets mine date also.
How can i remamber value 0 and if it stays the same after reset that date in corresponding cell in B column stays the same and not resets.
Maybe some form of check is there date in B before chacking status in A?
I have a problem similar to Ozone64's posting of 4/23 that I am trying to generate automatic time/datestamps in a cell whenever a value is entered in an adjacent cell. I am currently using the function =IF(A3"",NOW()) but the problem is when data is entered in subsequent rows the previous timestamp is overridden with the new timestamp. Thus at the conclusion of data entry every row ends up with the same date/timestamp as the final entry.
I am attempting to enter Timestamp data from a movie in this format:
minute:second.millisecond
When I enter a frame timestamp of 18 minutes, 42 seconds, and 5 milliseconds, excel auto formats this data to 12:18:43AM.
This is not what I want. I have attempted multiple types of cell formats in an attempt to enter this data without auto formatting. One requirement for the format is the ability to subtract two of the times for a change in time measurement. I have tried every setting under the "Time" format list, as well as custom formats, which fail to subtract.
I am trying to set up my doc. so that when i double click with in columns (B&C)) the current time get inserted in a 24hr format. I am also trying to do the same thing but with a date formula (column A, also with the double click feature).
View 6 Replies View RelatedI'm trying to make a directory whenever the macro runs that includes a timestamp. File names cannot include "/" or special characters, so I'm trying to change the format. However, even though NumberFormat changes it, excel still recognizes the date as having mm/dd/yyyy etc. so the directory cannot be made.
Here is a part of the code:
ActiveCell.FormulaR1C1 = "=NOW()"
Selection.NumberFormat = "yyyymmdd-hhmm"
DateTime = Selection.Value
strFileName = "Data Pull"
MkDir "C:..." & strFileName & DateTime
how I can modify the below code so that it populates the timestamp in the same row in Column E if Column A is populated with data...
Example:
Cell A1 is populated then populate Cell E1 with timestamp
if
Cell A4 is populated then populate Cell E4 with timestamp
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Cells.Count > 1 Then Exit Sub
If Target.Address = "$A$2" Then
With Sheet1.Range("E2")
.Value = Time
End With
End If
End Sub
How to modify this code so that I select only one column triggers the time stamp update? For e.g. if i make any changes in column A, the date stamp is updated in the corresponding cell in column B. Basically, I am trying to narrow down to only one cell in the row, but it should work for any row in the sheet.
Refer to the below post: [URL] ....
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Row > 1 Then Cells(Target.Row, "B") = Now()
End Sub