Start / Stop Sum Function
Mar 19, 2014
I have a program that requires the last 8 days to be total, unless there are 2 days off in a row. So my cells need to sum the previous 8, but then stop when two zeros show in the column and then restart following. One zero should continue to total the previous 8 days. As shown below, for 1/10/14 I should see 57.5. The sum needs to restart on 1/13/14 to show a total of 10.5. I have tried multiple formulas with no luck.
Col A Col B
1/5/140
1/6/1412
1/7/1412
1/8/1412
1/9/1411
1/10/1410.5
1/11/140
1/12/140
1/13/1410.5
1/14/1411
1/15/1411
View 5 Replies
ADVERTISEMENT
Jul 17, 2009
I've seen a lot of timestamp solutions but none of them fit my needs. Also my VBE skills are not good enough to create this. So here's the problem:
I've got 3 columns E,F en H. H contains a validation list with 3 options OK, NOK and OPEN.
If H is NOK I would like E and F to be blank. If H is OPEN I would like E to contain a start date wich doesn't update. If H is OK I would like F to contain an end date wich doesn't update.
View 3 Replies
View Related
Oct 20, 2008
I have a link set up in an Excel document that plays a .wav audio file. The problem is it just plays the file. No media player comes up and I need to be able to manipulate the file when it is playing (i.e. stop, pause, play, Ffwd, Rew). Can someone tell me how to link the audio file up with a player? I am using a Windows based system. Unfortunately, Mac not available to me.
View 4 Replies
View Related
Sep 19, 2013
I'm currently creating an inventory tracking spreadsheet for my restaurant.
I'm using ="*"&A(x)&"*" to create the necessary barcodes. Some of my inventory numbers have leadings zeros that need to be included. The formula above is eliminating the 0's and how to get them to show. I've tried a custom number formatting but that isn't working for me.
View 5 Replies
View Related
Sep 21, 2009
I have a spreadsheet that has
worksheet_calculate and also worksheet_changes, its a combination of the 2...
and it's purpose is to make a record of the number every time it changes by populating it into the next row, so I end up having a very long data list
and what happens is that my spreadsheet has real-time data coming into one cell which makes it constantly changing....
needless to say, when my spreadsheet is opened, it starts to do it immediately...and it wont stop as long as the number keeps on changing.
I would like to make 2 buttons - one says START, one says STOP
and when I click on START, then it will start making record of this number and when I click STOP, then it stops recording the changes of this number.
View 5 Replies
View Related
Aug 21, 2014
I am attempting to create a datasheet to track the actual time an agent takes a break or lunch. Here is an example of the data that I am using.
name Date Lunch Sch Brk1 Sch Brk 2 Actual Time
BrandonHolt8/19/201411:10 8:30 1:20 8:24:20 Break
BrandonHolt8/19/201411:10 8:30 1:20 11:42:34 Break
BrandonHolt8/19/201411:10 8:30 1:20 12:57:46 Lunch
Because I have two break times, possibility of more depending on the agent, how do i create a formula that will look at this data, take the schedule time for say break one and only apply that against the time that is more in line with the closest actual time?
View 1 Replies
View Related
Oct 13, 2008
How can I make XL (2000) display the macro start/stop recording and relative/absolute box that used to appear whenever I started recording a macro?
Such an apparently simple issue, but I can't resolve it!
Somehow I lost this small box, and I know how to force it to display via customize, but it doesn’t seem to work the same (relative does not work as such) and the buttons or box disappear.
View 2 Replies
View Related
Jun 20, 2007
The company I work for does not use the usual calendar dates and uses a modified calendar. As an example, the month of January is Dec 31 thru Jan 27, February is Jan 28 thru Feb 24 and so on. I need to group data using a pivot table and summarize data by month, but as I just described above, calendar months will not work. Is there a way to modify what Excel sees as monthly dates?
View 9 Replies
View Related
Mar 13, 2014
I have a small project at work where I am being asked to put a simple spread sheet that will calculate a start/stop time - and also include the date. For example:
Start time 5pm, date: 3/13. The spread sheet to auto calculate what the stop time and date will be if a specific amount of hours is to be calculated. For example in this case, 12 hours. From calculating in my head that would be 5am the following day. However, how can I get this in excel to work and therefore all i would have to do is enter the start time and date, + 12 hrs, and excel would calculate the time/date after the additional 12 hrs.
View 3 Replies
View Related
Jan 30, 2014
I have this code :
[Code] .....
Great Timer. Have this assigned to a button to start, how can I work in a button to stop or pause this code from running?
View 3 Replies
View Related
Aug 31, 2006
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click()
Dim CB As Variant
For Each CB In ActiveSheet.CheckBoxes
CB.Value = False
Next
End Sub.......
View 3 Replies
View Related
Oct 6, 2008
As you can see below, I've written code that writes random numbers into three columns of a spreadsheet (10 numbers in each column).
What I want to do is create code that will run the random number generator for a period of 1 minute and then stop. I know that I will need to write a timer subroutine to do this but I'm how unsure how to do this.
View 9 Replies
View Related
May 12, 2014
I would like to know the easiest way to temporarily keep a worksheet code from running while I am editing, then turn it back on when I am done. I was thinking a button with these commands(?)>
Application.ScreenUpdating = False
Application.EnableEvents = True
but I don't know which button to use, or if I would need a button for each.
View 2 Replies
View Related
Jan 18, 2008
I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty
2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7
View 8 Replies
View Related
Oct 15, 2007
I have a timesheet where user updates start and end time for various tasks.
I have placed a time capture button in the excel sheet (which is simply a macro saying =now() function)
The user clicks it before starting and after finishing the task. The start and end times are captured in adjacent cells.
If the user starts the work, and goes on a lunch break say for 20 min, comes back finishes the task and captures end time, the time difference will not consider break time which is non productive.
How can I incorporate something like 'pause' option so that before he goes for lunch he can temporarily pause the time.
View 9 Replies
View Related
Dec 25, 2007
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find)
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Sheet1. Range("A1").Value = "" Then
MsgBox "Cannot print until required cells have been completed!"
Cancel = True
End If
End Sub
View 4 Replies
View Related
Oct 16, 2008
Hi, I am runnning this marquee label function in a userform (Dash). When I close the form, using 'unload frmDash' the function is still running in the background. Can someone give me a tip on how to end it at the same time as the form is closed?
View 14 Replies
View Related
Aug 20, 2008
I have a data range - C4:C54 and I want an AVERAGE calculated in C56, but I only want a value displayed in C56 when a data entry is put in. Up to 50 data points could be put in anywhere e.g. only 14 values in C16:C30, or 44 values in C6:C50, or the full 50 in C4:C54.
The formula I've been trying is
=IF(ISERROR(C4:C54<>""),AVERAGE(C41:C54),"")
However, when no values are in the range it displays DIV/0! whereas I'd like the cell blank.
View 4 Replies
View Related
Jan 22, 2014
I have a table as follows: [URL] - note: cells containing times and temperatures are numeric values, I've used custom formatting to add " mins" and "°C" on the end
In one cell, a user can input a time period (in mins), and in another cell, I would like to output the start and end columns (in letter/s) for the chosen time.
For example, in the link above, if the value inputted '30' then the start column is 'C' and the end column is 'G'. If the user had inputted '60', then the results would be 'H' and 'K', etc.
I am able to find the start column with the following equation:
=SUBSTITUTE(ADDRESS(1,MATCH(VALUE,C2:P2,0)+2,4),"1","")
I am struggling, however, to find the end column for the chosen time.
If each time had the same number of temperatures then it would be a simple case of adding the number of temperatures per time, minus 1, after the "+2".
My first idea was to copy the above function, but to change the "0" in the MATCH function to "-1", in order to find the next greatest time value. However, it appears that using "-1" in the MATCH function only works if the range is in descending order - my times are always in ascending order.
I have a further problem in that the time periods are not always the same values (i.e. it won't always be 30-60-90-120, it could for example be 30-45-60-75). So as far as I know, there is no way in advance of knowing the next time period up (and then subsequently taking one column to the left).
One possible workaround I have considered involves the following:
- Add a new row between rows 2 and 3, which has the time values in each cell (i.e. from column C, values of 30-30-30-30-30-60-60-60-60-90-90-90-120-120) - effectively duplicating the time row, but not merging cells
- Use the COUNTIF function to find the number of cells in that row containing the chosen time
- Add this value, minus 1, after the "+2" in the above formula, i.e. =SUBSTITUTE(ADDRESS(1,MATCH(VALUE,C2:P2,0)+2+COUNTIF(C3:P3,"="&VALUE")-1,4),"1","")
View 14 Replies
View Related
Jun 11, 2009
As everyone realizes that WORKDAY function can return a working date that exclude weekends and any dates identified as holidays. However, what if I want to return a working date excluding my designated holidays but including weekends?
For example,
Holidays are 1 Jun 2009, 2 Jun 2009 and 4 Jun 2009
Start Date: ???
Finish Date: 8 Jun 2009
Duration: 5 days
The Start Date should be 30 May 2009.
Seems like I am not able to use WORKDAY function to calculate the start date.
View 11 Replies
View Related
Nov 12, 2008
Anyone know why the NETWORKDAYS() function will return a value of 1 if the start and end date are the same? Does the function always assume that the start_date is at 12:00AM and the end_date is at 11:59PM, because it seems to also show that there are 3 days between 11/04/08 and 11/06/08.
View 9 Replies
View Related
Feb 28, 2008
Is there a way to start match from a relative position?
Say a match I have in column "A" returns 344. Is it possible to start a new match for column "B" from that spot, instead of having it return a match starting at the top?
View 5 Replies
View Related
Jan 18, 2013
I have a vba function linked to conditional formatting that i want to temporarily stop while a sub to insert a line is running as the sub stops when it hits the sheet where the vba function operates. When i disable the vba function (or remove the vba function) the sub works fine, if the vba function is not disabled the sub stops.
View 4 Replies
View Related
Jul 4, 2014
I have 3 conditions within my spreadsheet, which only 1 condition can have a numeric value in it at any one time.
The result of my calculations returns the following results
Condition 1: False; Condition 2: 168001.5072; Condition 3: False
I then use the MAX command to pick up the cell that has a value in it.
The command I use is: =MAX(L28,N28,P28)
The problem occurs is when I use this MAX command it Rounds up the value from 168001.5072 to 168001.51 - I need to stop this rounding from occurring.
Now I have just been told on this forum about how to use the TRUNC command to stop my original formula from rounding my final value (168001.5072) but I'm not sure if using the TRUNC command will work in this situation.
I can not use the "=" command becuase depending on the values I use any 3 of the conditions can be met, which will mean a value will sit in either condition 1, 2 or 3, so that is why I need to pull the MAX value.
The attached image shows my issue.
The value on the right 168001.5072 is being rounded up and displayed as seen on the left as value 168001.51 and I would like ot know how to stop this from occuring.
image2.PNG
View 4 Replies
View Related
Oct 12, 2007
I have two columns A & B. If I enter "Short" into Col A, I want "Long" to automatically appear in Col B, and vice versa. This is the code I have created so far. =IF(C4="Short","Long",IF(C4="Long","Short",IF(C4="",""))). This works but when I paste the formula into all cells in Col B, I get "FALSE" showing up in every cell. How can I stop the "FALSE" from populating every cell in Col B while Col A remains blank?
View 4 Replies
View Related
Oct 29, 2008
I have fought with this for 2 days and I am trying to have a worksheet cell update the date and time if the cell it is referencing (B3 see below)
Here is the formula I am using however it updates every time a new row is added to the worksheet. So the Date/Time stamp on each row is always updated to NOW() everytime.
=IF(ISNA(B3),"0/0/00 00:00",NOW())
I would like to have a Date/Time stamp stay as is once that row has been added. Is there anyway to stop the field from updating once the date and time have been set?
View 9 Replies
View Related
Nov 11, 2009
I have this equation
=(INDEX(abc!B8:D18,MATCH(Sheet1!C39,abc!A8:A18),MATCH(Sheet1!D39,percentiles,0)))
it gives me this #N/A. I'd rather have it show $0.00.
View 9 Replies
View Related
Feb 8, 2013
I need the VBA/UDF to produce a column of dates between a start date and end date, excluding Sundays.
I can see lots, excluding weekends, but very little for just Sundays.
View 4 Replies
View Related
May 6, 2009
I'm trying to create a IF function to stop at $1500 for 401k employer match. To make it simple the variable in column D is constant but in reality it's based on 50% match amt up to $1500 of amount contribute(% of gross pay). The accumulation of matching is a rolling balance. If the match amt is less 1500, then match amt. But False, the left over amt equal 1500 then STOP there onward.
IF(SUM($D$3:D19)+($C20*0.5)<1500,$C20*0.5,SUM($D$3:D19)+($C20*0.5)-1500)
View 4 Replies
View Related
May 3, 2014
I am trying to use the simplest code possible (being a novice) to execute a macro which makes a copy of Cell A1:A4 and paste its values to Cells B1:B4 if cell B5=1 (or whatever). The Macro with copy and paste works (I recorded it and in my testing it was ok). And also the function, that contains If-Then status of cell B5, works and calls correctly the Macro.
Yet when the macro is called by the function (=CopyMyCells(B5)), the Macro (MacroCopy) runs - I tested this with a Msgbox - but stops just in doing what I need, i.e. in doing the copy-paste process. Here the code which is placed in a module of the proper Worksheet (Excel 2003, on WinXPSp3):
[Code] ........
View 6 Replies
View Related
