I've got a range of data in Column D approx 50,000 rows long and I need to go down this range and when theres a blank cell copy the info from the cell above. I've got some code which loops through this but I need to make sure I put "EOF and the bottom of the info to stop the loop. Is there a slicker way of writing this code?
Code:
Sub TestBlankCell()
Range("D5").Select
Do
[Code].....
I am looking for a formula function or a vba code where:
- In workbook1 find the first cell that is empty between range A7 -
A10,
- In workbook2, in Range G10- G13: find the word "Day1".
- If the word "Day1" exists in cells G10 or G11 or G12 or G13, copy
the particular cell or cells where "Day1" exists to the first found
empty cell or cells in range A7-A10 in workbook1.
Lets suppose cells A8, A9, A10(workbook1) are empty cells, that means
A8 is the first empty cell.
And G10,G11,G12, G13 (workbook2) have the word "Day1"
Then,
Copy cell G10 into cell A8
Copy cell G11 into cell A9
Copy cell G12 into cell A10
I am using MS Excel 2000. Sheet1 is my working sheet. Cell A17 displays the current date (dd/mm/yyyy). Cells B17:K17 display my summary figures for that day. What I would like is a macro button that would look at the date in Cell A17, and if it is the first of the month …. eg 01/03/2005 it should insert a new sheet into the workbook and put the name Mar05in this case or what ever month it is on the tab. It then copies Cell A17:K17 and pastes the data in to the corresponding monthly sheet starting in A3 to K3. Because my working sheet (Sheet1) is updated with different data daily the new summary data (always in A17:K17) needs to be copied and pasted under the previous days entry in the corresponding monthly sheet. For the month of March I should end up with 31 entries giving me a summary for that month.
View 7 Replies View Related(I am using Excel version 14.0.7106 and MS Office Professional 2010.)
I have a macro in which I have named a range of numbers in a spreadsheet, used the "find" function to find a particular number in that range, and now would like to copy some information into a cell in the same row as the found number. However, when I try to move over to the cell that I'm copying to, it only goes to the 1st row in the range that I have defined.
Here's the portion of code I think you need to see. Everything works...it finds a match...but then I don't know what to do from there to get the information to the correct row:
'Grab the 1st project number
Range("C8").Select
Do Until ActiveCell.Value = ""
If ActiveCell.Value "" Then
prjnum = ActiveCell.Value
Selection.Offset(0, 8).Select
[Code] ..............
I am looking to find all visible cells in column E that are blank, and then add ''B'' to those empty cells.
I am using code similar to the below:
[Code] .....
I'm trying to find a macro that will copy data from the areas of B120:E179 and I120:K179 for example (linked to another worksheet within the workbook) and special paste (Values Only and skipping blank cells) it to the next available open cell up top where basic data entry will be taking place B10:E29 and I10:K29. I need it to only copy/paste the rows with data (skipping all cells/rows with no data) and once it is finished coping I will need it to place an "X" in column M next to the row that it copied data from. I would also need it to reference the data in each row from B to E and if there is an entry say on B14 to E14 that matches it but if I10 to E29 are blank then paste that information on row 14. If it does not match or if those columns are full then paste on next available line.
I hope I'm making sense here. This is for a vehicle tracking log between checkpoints. Each driver and info will be listed on each row. Columns B through E will contain information for each driver: name, badge, #passengers, and vehicle #. The log lists location, time, and destination for outgoing travelers in columns F to H. Incoming info is listed on Columns I to K............
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
I have small problem to solve and I can't find out how: I have to find cells in a range (L4:L20) with value PM and copy range with two next cells to cell F4 (not a cell with "PM") If in range("L4:L20") cells = PM then copy range with next 2 cells to ("F4"). See attached worksheet.
View 3 Replies View RelatedI have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.
View 3 Replies View RelatedI have a table like this:
1/2/14
2345
1/6/14
34665
1/7/14
5473457
For Column A-I would like to create a macro that will copy the info from cell A1 and paste in in A2. This will continue all the way to the last row containing info which will vary. So after the first copy/paste, it well go to A3 and copy paste onto A4, A5 will copy and paste onto A6 etc.
For Column B- The same only it will copy the contents of B2 and paste it on B1, B4 copy/paste to B3 all the way until the last row of data.
I am using a worksheet to scan or enter students into a school event and determine their eligibility to participate in the event. Everything is working great but I need to do the following on Enter Student button click:
1) Cut scanned value (ID number) from input Cell A1
2) Paste value into next empty cell in column A (Rows build as students are inputted)
3) Copy Eligibility status (text) from column F into A6
I have a limited VBA/Macro background and have NEVER got a button to work.
I have 10 worksheets. I would like to create a macro to find all the "2" values on worksheet 1, and have the actual range that the cell is, compiled into a list -example: I would like the list to be similar to this= (A1,B15 ,C8)
I even tried to record it but it doesnt show me the actual range that the data is found in.
I have a workbook with over 900 worksheets.
The macro I have is looping all sheets looking for empty cells in a specific column, and when it founds an empty cell the value for one cell is copied to the empty cell.
But in one worksheet it stops with the error:
Run-time error '1004'
Application-defined or object-defined error
I am trying to do is create an invoice log of payments received. For each payment there is a cell value of how many products the customer has which is updated on each payment entry. What I want to do is have a macro that runs when all other data is entered to update this value.
So I have a main customer sheet where it holds the product amount in the same workbook, let's call this cell $A$1 holding a value of 47. I go to enter a payment record on the invoice sheet, once this is complete the macro will run and look to $A$1 on the first sheet and update $B1 on my invoice sheet. On the next entry it will update $B2, then $B3 and so on.
My company has an excel file that has our new customer's information (colum A & B are first & last name;Column C is customer email; Colum D is cutomer phone, ect...)
once that information has been entered we have another excel file that will load all of a customer's information, and then be pasted into a welcome letter into MS Word for their confirmation & emailed to them
The problem I'm running into, Is that I do not know how to populate my nex excel sheet with the info I want only from a specific line.
I would like to enter a line / row number (for example '6') and than have excel go to that file & copy/paste the name, phone, email, company name, ect. into my new excel sheet
I have one that works already, but the previous owner PW protected it & hid his formulas/macros, so I'm in a dead end now...
I need to pass range information (eg. WorkSheets("abc").Range("A1") as text or ??) from a cell (ie the above text is in a cell on some worksheet, say "XYZ") to a VBA procedure or could directly use it in the procedure, similar to...
Sub MyProc(RngInfo as string [or?])
dim RRng as range
Set RRng= RngInfo ??? it is this part I'm really not sure how to do
where RngInfo is a worksheet that has a "named" cell that contains the above cell with the indicated range in it.
eg. RngInfo is worksheets("XYZ").Range("D1") where D1 contains the text (or ?)WorkSheets("abc").Range("A1")
I've only indicated these as text items because I'm not sure what/how you would do this. The end purpose of this is to pass variable Range information from a cell on a WS either into (or use within directly) a VBA Sub. I guess I could pass the WS and Range Address as a single string separated by a "Char" and use Split to separate them and then recombine using Worksheets(Parm(0)).Range(Parm(1)) but it seems like it should be easier than that.
I have a workbook with a single worksheet that has about 2000 rows, columns A, B, C, D, E & F
Cells in colums A, B, C, E & F all have very different information in them, nothing is similar in any of those columns that I can base a criteria on. Cells in column D however will have 1 of about 18 possibilities in them
What I want to do is have another workbook with 18 worksheets, each worksheet named 1 of the 18 possibilities, and somehow magically pull the data from the first workbook and insert it into the correct worksheet in the second workbook, leaving the data in the first workbook intact.
I update the first workbook several times a day, adding and deleting from it so would need to update as it goes, or be able to run the update as and when needed.
My skills are limited to simple formulas inserted into cells and dragging them down!
I need to copy a cell into another spread sheet contingent on whether or not another cell in the row is empty.
For example, I need to copy cell A5 because D5 is empty.. However, if D5 was not empty I would not need to copy A5.
I don't need this macro to loop.
i need to find the first blank cell in a range of a row and return the cell value to the 1st cell of the row, or even return the column header if possible, without the use of VBA due to high security settings at my workplace!
How is it possible to have a talbe of data, months as headers, 4 rows of data for each month, but the next time I run code that imports from another Excel Report to paste the data into the next empty cells? ....
View 9 Replies View RelatedSuppose you are in a worksheet in A1. How can i place my cursor on the first not empty cell?
View 9 Replies View Relateddelete rows with the word apple in cells, in row A:
How can I make this work until last empty cell? The other issue is that I am using this to delete rows also:
Range("A1").Select
This deletes the entire row when its corresponding cell A is empty. I currently make excel put xxx in cell A2500 before running the loop. I would put do until ActiveCell = Null, but that wont work because as you can see some cells in row are empty.
I have the following code that works beautifully, unless the selection area has only one row of data.
lastrow = Range("A11").End(xlDown).Row
Range("A11:A" & lastrow).Select
Due to other data (that needs to not be selected) near the bottom of the page, I cannot do xlUp. So, what's a fix when I run into only one row needing to be sleected?
I want to search in a column for cells with numbers, and one by one get the row number. i want to do this only for the cells with values, excluding the blank ones.
View 8 Replies View Related1. copy data to 'check' sheet from web
2. new data to be appended to the existing data ( not to overwrite on the existing one.
3. sorted within selection
4. down to 1st blank cell below pasted data
my code is not working not well
Sub Srt()
If Len(Range("a1")) > 0 Then
Range("a1").End(xlDown).Offset(1, 0).PasteSpecial
Else
Range("a1").PasteSpecial
End If
ActiveSheet.Paste
Selection.Sort Key1:=ActiveCell, Order1:=xlAscending, Header:=xlGuess, _
OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortTextAsNumbers
Selection.End(xlDown)).Offset(1, 0).Select
End Sub
problems are
1. it works only in 'A' column. We need it to be flexible to 'A', 'F', or 'K' column depending on where the cursor is
I have an invoicing spreadsheet, what I want is to have a main working page and then tabs after separated by vendor, but save myself a bunch of manual work in the future.
I want to be able to work in the main tab and the other tabs automatically update with the new info.
So I want the macro to search the text in the first column and if it finds "AIM Land Services Ltd." then I want it to populate the appropriate tab, in this case "AIM", with all the respective information after it ie: A-O. But I dont want it to select any other vendors/ info.
This is what I have:
Sub MoveData()
For Each cell In Range("A1:A1") ' Where to look for the date
If cell.Value = "AIM Land Services Ltd." Then ' The date
Range("A5:O350").Select ' What is the range to copy
Selection.Copy ' Copy it
Sheets("Invoice_Log").Select ' Select the Sheet it applies to
Range("A5").Select ' Where to paste the data
[Code] .........
I want to do is add data into Sheet A each day then press a button which will copy the data in a range and paste it into Sheet B, but I want to create a list of all data so I need it to find the next empty cell and start the paste from there (if that makes sense).
I want it to create a data base on one sheet from a daily import, I have a code to copy one cell to next empty cell but dont know how to duplicate it to a range.
I hope I have given you enough info this is what I have done so far
Public Sub CopyData()
Dim ws As Worksheet, bi As Byte, vData(1 To 1)
Set ws = Sheets("A")
For bi = 1 To 1
vData(bi) = Application.Choose(bi, ws.Range("A1"))
[Code]....
I have a spread sheet with bunch of rows and columns. Columns goes all the way from A ... BB and rows from 1 to 40,000
The main focus is column Y and AC
If there is a value of FALSE found in column Y then macro should go to previous row and copy the value that contains in column AC and then move down to the next row, , where the value FALSE was found and that's in column Y and paste that value in column AC the NUMERIC VALUE
Below is the data ...
I try to get a code that will give me the first empty row after cell A18? Even if the cells above it are empty.
The code i have so far isn't working.
Anyone knows what goes wrong?
LastRow = Range("A18", Range("A65536").End(xlUp).Row + 1)