I have a macro that calls the Calculate event. My problem is that the workbook is rather big and so the calculate takes some time. The user cant see the Status bar as I am working in full screen mode and useing Userforms that fill the entire screen.
I want to be able to display the progress (eg: Calculateing 35%) to the user.
Is there any way that a macro can "read" this info from the statusbar or from somewhere else?
Im forgetting how to code something for this ....
View 7 Replies View RelatedI have a macro that takes quite some time to run, 3-4 minutes is it possible to have a % progress indicator in the status bar to let me know how much of the process has been completed so far?
View 5 Replies View RelatedI have been looking for a macro (and have failed to find one) that would give a progress bar in status bar as a percent of the macro run time, e.g
If I had a macro that took say 5 minutes (which I would know in advance) to run is there a way to have a progress bar in status bar that would progress incrementally as a percentage of the 5 minutes or even simpler break the 5 minutes into 1 minute increments?
I have a query around dates and current project status.
I1 Contains the Current Date
C4 Contains Due Date
C5 Contains 4 Possible Selections. Not Started, In Progress, Awaiting Feedback,
Complete
What I want the formula to do is.
IF Current Date is greater than Due Date AND Current Status is either Not Started or In Progress then return Overdue.
I've written it as follows, but it doesn't seem to work?
=IF(I1>C4,IF((C5="Not Started",IF(C5="In Progress"),"Overdue",""),""))
My VBA code will copy and paste several workbooks into master list.
the cells to be pasted will be starting on cells(13,9) until cells(13,501) or Range("I13:SG13")
while the max row will be determined by Cells(Rows.Count, "F").End(xlUp).Row
Here is the progress bar code I found in internet, maxrow/column has been changed to my requirement but how to place my VBA code to this script? the one highlighted in red, I guess it
[Code] .....
My VBA code will copy and paste several workbooks into master list. The cells to be pasted will be starting on cells(13,9) until cells(13,501) or Range("I13:SG13"). While the max row will be determined by Cells(Rows.Count, "F").End(xlUp).Row
Here is the progress bar code I found in internet, maxrow/column has been changed to my requirement but how to place my VBA code to this script? the one highlighted in red, I guess it
Code:
Sub ShowProgressInStatus()
Dim Percent As Integer
Dim PercentComplete As Single
Dim MaxRow, MaxCol As Integer
MaxRow = Cells(Rows.Count, "F").End(xlUp).Row
MaxCol = 501
[code]....
I would like to know how to input 10% 25% ect then in another cell the graph bar growing till 100% mark is completed.
View 6 Replies View RelatedHow to show progress bar for both percentage completion and time left.
The code below is already created with percentage completion. Just to add time left.
[Code] ........
Display progress bar with percentage completion.
The below code just display macro is running without notifying user the percentage of completion.
[Code] .....
What formula I should use for this condition:
A (Contains many months, e.g. 3 November, 2 December, 10 January, etc. -- in excel date standard format mm/dd/yy)
B (Contains Paid, On process & Waiting for Invoice -- using IF formula)
I want to calculate the percentages of November that has been paid from all of A that contains November in it in column C.
What formula i should use?
I already use =SUMPRODUCT for counting the November.
I only want to use 1 other column to calculate the percentage (C column)
I want to use a msgbox as a progress indicator for a routine in an application. I cant figure out how to do this.
View 5 Replies View RelatedI have some vba code that currently copies a status table out of a worksheet, into a temp file for an email. The status table in excel has a column D which can have different status. I want to select everything in the table except rows that are 'Descoped'. Currently my code looks like:
Set rng2 = Sheets("Execution Status").Range("B2:F420")
This picks up everything without looking at the status. I want to change it so it doesn't pick up the rows where Column D contains 'Descoped'.
In pseudo code I would describe it as:
Set rng2 = Sheets("Execution Status").Range("B2:F420") where value in D5:D420 is not equal to 'Descoped'.
I have tried:
Set rng2 = Sheets("Execution Status").Range("B2:F420").Value "Descoped" and nothing gets selected.
Im consolidating datas from muliple excel files to single data base excel file.Am having macro and it is working fine for me.But when am loading data to data base file the excel files are vibrating.To avoid this issue i want to Set the progress bar which should indicate the progress of the data loading.
View 12 Replies View RelatedI have a workbook that I've built for a project. I've attached a sample workbook. What I'm trying to do, for the entire sheet or workbook if possible, is turn any Cell with a percentage of 30% to 49% yellow and any cell with a percentage of 50% or more Red. I would also like to move the ID's of the variable cells, for example Id number 9922, to the cells beside the description of the rows, Affected would be an example, if the information contained in the same row as the ID meets with a set of variables.
For example I only want the ID's moved if they correspond with IDsub 1-25. One more thing, the people who will be using this spreadsheet will be copying data from a website when it is imported it does not insert the values as numbers. I would like to format the cells, in example workbook they would be any of the cells labeled ID IDsub Variable or Number, so that anything put in that cell will automatically be converted to a number.
I should also probably add that the formatting will be done on approximately 80 rows a sheet with 47 sheets.
I would like to have a progress bar in some of my userforms.
As an example I attach a sample. progress bar.xlsm
I'm trying to come up with an efficient formulae or function to calculate tax
The problem I have is that the tax is progressive. As below
the first 20,000 is taxed at 5%
the next 20,000 is taxed at 6%
the next 20,000 is taxed at 7%
the next 20,000 is taxed at 8%
the next 20,000 is taxed at 9%
more than 100,000 is taxed at 10%
I'm trying to do a formula like below
Cell B3 is my taxable amount
Cell B5 =IF(B$3>20000,20000*0.05,B$3*0.05)
Cell B6 =IF(B$3>40000,40000*0.05,(B$3-20000)*0.05)
This gives me a problem in that for 35k say, I end up with a negative number for the second part in cell B6. My other issue is that each calculation will take up 6 rows on my
spreadsheet. I was hoping to set up a function that could do this in a cell, but even the simple stage defeats me at the moment.
I struggling in progress bar code, Once userForm.show code executes code execution stops, Once if i close the userform at runtime step wise code continues from next line in this case i mean UserForm.ProgressBar1.Min = 0
Sub test()
UserForm.Show
UserForm.ProgressBar1.Min = 0
UserForm.ProgressBar1.Max = 100
[Code]....
There is a nice progress bar at
http://www.dailydoseofexcel.com/arch...-and-controls/
Sub DoStuff()
Dim ufUpdate As UUpdate
Dim dtTime As Date
'instantiate the userform
Set ufUpdate = New UUpdate
ufUpdate.lbxStatus.AddItem "Starting Process..."
ufUpdate.lbxStatus.AddItem "Do the next thing..."
ufUpdate.lbxStatus.AddItem "Done!"
ufUpdate.Show....................
I have a code that has a loop with up to 100,000 possible iterations. The max number of iterations, N, is variable and to be specified by the user via user form.
That's why I like to show only incremental progress , say 5% competed , 10% completed ,... , so on. What is the best way to code it?
Another question: I tried to show it via
Application.StatusBar = Format(PctDone, "#.##%") & " completed"
but for some reason it does not get updated while the code is running. Is that because the user form is visible? For now, I'm trying to add a label progress bar to the user form, but StatusBar would suffice.
I'm using a mostly recorded macro to do some rather lengthy formatting in a workbook. The formatting is lengthy enough that I don't want people to think the PC is hung. So I'd like to use the progress bar. I'm trying to trim the code down to just the bare essentials for running the progress bar during the macro procedure (and so I can better understand what's happening in the code). The attachment shows what I've done so far. When I press the "Format Workbook" button then I have to press another button ("Run Progress Meter") to really launch the progress bar.
View 5 Replies View RelatedI am using the following code to activate a progress bar.
Private Sub UserForm_Activate()
Dim dTime As Date
Dim i, t As Integer
For i = 1 To 100 Step 100 / 8
dTime = Now + TimeValue("0:00:01")
Application.Wait TimeValue(dTime)
ProgressBar1.Value = i
Next i
End Sub
This works fine and the progress bar moves in 8 steps.
However, I want to include this into a module of code and it moves along according to how far down the module my code is running.
I want to be able to have a progressbar that populates upwards. When I use a scrollbar to adjust the height it wants to go down.
View 2 Replies View RelatedUsing the below table, I'm trying to do the following
I'll use row 3 as an example. I'm trying to creat a RAG status based upon the foloowing details
G- If D3 is under 30 days past D2
A- If D3 is over 30 days past D2
R- If D3 is over 30 days past D2, and todays date is over 30 days past.
ABCDE1Today:20.7.2009Stage due (planned date)Stage completed (actual) 2 1.2.200910.3.2009R3 1.6.200910.6.2009A4 1.6.200910.7.2009R5 1.7.200910.7.2009G
I have 2 macros ready and i need to merge it to one to make it run.
First macros will do the calculation and the other is adopted from a website as an sample to display % of process. Now the issue is i don't know how to merge it. Can any one help me to setup this file please. Copy of sample file is attached for your reference.
Calculation Macros:
VB:
Sub Premium()
Dim ws As Worksheet, ws1 As Worksheet, ws2 As Worksheet
Dim cel As Range, cel2 As Range, cel3 As Range, cel4 As Range, found As Range, rng As Range, age As Variant
[Code]....
I have created a Excel userform. Since it has lot of controls, it takes good amount of time to load.
Is there a possibility of displaying a progress bar till the userform is loaded.
Google search has shown me ways to create a progress bar using Excel Forms. However, I am looking for a way to show the progress bar till the main userform is loaded.
I want to create a progress bar that will show how much percent is completed from bottom to top. It should count total total number of cases in the table. suppose they are 280 then it should show 0 to 280 in a label. 0 at the bottom and 280 at the top. then count how many cases have been completed as a percentage going up when percentage is increasing.
View 14 Replies View RelatedI have a macro that takes about a minute to run. I would like to add a progress bar to appear once the macro starts running. There are no loops in the macro. What are my options?
View 3 Replies View RelatedI use this code below to run horizontal progress bar. is there any code how to make Vertical Progress Bar,?
[Code] .....
How would I add a nice progress bar to the following
View 14 Replies View Related