I have a data range - C4:C54 and I want an AVERAGE calculated in C56, but I only want a value displayed in C56 when a data entry is put in. Up to 50 data points could be put in anywhere e.g. only 14 values in C16:C30, or 44 values in C6:C50, or the full 50 in C4:C54.
The formula I've been trying is
=IF(ISERROR(C4:C54<>""),AVERAGE(C41:C54),"")
However, when no values are in the range it displays DIV/0! whereas I'd like the cell blank.
TotHCInv.Value = WorksheetFunction. Sum(KRInv, PBLInv, CRInv, PVInv)
If i >= 34 Then CPSCtphRMA.Value = WorksheetFunction.Average("G" & (i - 30) & ":G" & i)
The first line runs properly, but the second line bugs out with the error message "Unable to get the Average property of the WorksheetFunction class". I can simply do the math, but I thought that using the worksheet function would be easier than summing and dividing. I'm curious, though, as to why I can't seem to use the Average function.
I have a program that requires the last 8 days to be total, unless there are 2 days off in a row. So my cells need to sum the previous 8, but then stop when two zeros show in the column and then restart following. One zero should continue to total the previous 8 days. As shown below, for 1/10/14 I should see 57.5. The sum needs to restart on 1/13/14 to show a total of 10.5. I have tried multiple formulas with no luck.
Col A Col B
1/5/140
1/6/1412
1/7/1412
1/8/1412
1/9/1411
1/10/1410.5
1/11/140
1/12/140
1/13/1410.5
1/14/1411
1/15/1411
Hi, I am runnning this marquee label function in a userform (Dash). When I close the form, using 'unload frmDash' the function is still running in the background. Can someone give me a tip on how to end it at the same time as the form is closed?
View 14 Replies View RelatedI have a vba function linked to conditional formatting that i want to temporarily stop while a sub to insert a line is running as the sub stops when it hits the sheet where the vba function operates. When i disable the vba function (or remove the vba function) the sub works fine, if the vba function is not disabled the sub stops.
View 4 Replies View RelatedI have 3 conditions within my spreadsheet, which only 1 condition can have a numeric value in it at any one time.
The result of my calculations returns the following results
Condition 1: False; Condition 2: 168001.5072; Condition 3: False
I then use the MAX command to pick up the cell that has a value in it.
The command I use is: =MAX(L28,N28,P28)
The problem occurs is when I use this MAX command it Rounds up the value from 168001.5072 to 168001.51 - I need to stop this rounding from occurring.
Now I have just been told on this forum about how to use the TRUNC command to stop my original formula from rounding my final value (168001.5072) but I'm not sure if using the TRUNC command will work in this situation.
I can not use the "=" command becuase depending on the values I use any 3 of the conditions can be met, which will mean a value will sit in either condition 1, 2 or 3, so that is why I need to pull the MAX value.
The attached image shows my issue.
The value on the right 168001.5072 is being rounded up and displayed as seen on the left as value 168001.51 and I would like ot know how to stop this from occuring.
image2.PNG
I have two columns A & B. If I enter "Short" into Col A, I want "Long" to automatically appear in Col B, and vice versa. This is the code I have created so far. =IF(C4="Short","Long",IF(C4="Long","Short",IF(C4="",""))). This works but when I paste the formula into all cells in Col B, I get "FALSE" showing up in every cell. How can I stop the "FALSE" from populating every cell in Col B while Col A remains blank?
View 4 Replies View RelatedI have fought with this for 2 days and I am trying to have a worksheet cell update the date and time if the cell it is referencing (B3 see below)
Here is the formula I am using however it updates every time a new row is added to the worksheet. So the Date/Time stamp on each row is always updated to NOW() everytime.
=IF(ISNA(B3),"0/0/00 00:00",NOW())
I would like to have a Date/Time stamp stay as is once that row has been added. Is there anyway to stop the field from updating once the date and time have been set?
I have this equation
=(INDEX(abc!B8:D18,MATCH(Sheet1!C39,abc!A8:A18),MATCH(Sheet1!D39,percentiles,0)))
it gives me this #N/A. I'd rather have it show $0.00.
I'm trying to create a IF function to stop at $1500 for 401k employer match. To make it simple the variable in column D is constant but in reality it's based on 50% match amt up to $1500 of amount contribute(% of gross pay). The accumulation of matching is a rolling balance. If the match amt is less 1500, then match amt. But False, the left over amt equal 1500 then STOP there onward.
IF(SUM($D$3:D19)+($C20*0.5)<1500,$C20*0.5,SUM($D$3:D19)+($C20*0.5)-1500)
TPR, DISPLAY and FEATURE columns generate a rating based off of an IF function. In the Executed column, I need TPR, FEATURE, DISPLAY to be averaged together...BUT....In I want the average only include columns where there are numbers. For example in row one the eqn would be (1+3+2)/3, but in row 2 the eqn would be (1+1)/2...can I state an average function within an if function? Or what would be the best way to create an eqn for this?? I have thousands of rows to complete and doing it manually is not an option.
0- Did not meet expectations
1- Below expectations
2- Met expectations
3- Exceeded expectationsTPRDISPLAYFEATUREExecuted?Effective?Comments132Coming off of a Dec promotion113111111221
I am trying to use the simplest code possible (being a novice) to execute a macro which makes a copy of Cell A1:A4 and paste its values to Cells B1:B4 if cell B5=1 (or whatever). The Macro with copy and paste works (I recorded it and in my testing it was ok). And also the function, that contains If-Then status of cell B5, works and calls correctly the Macro.
Yet when the macro is called by the function (=CopyMyCells(B5)), the Macro (MacroCopy) runs - I tested this with a Msgbox - but stops just in doing what I need, i.e. in doing the copy-paste process. Here the code which is placed in a module of the proper Worksheet (Excel 2003, on WinXPSp3):
[Code] ........
I am trying to create a table showing the yearly average occupancy rates per quarter for every year between may 1998 and december 2008 inclusive (for licensed hotels, motels and guest houses, and serviced apartments in Australia; if that interests you).
I have a spreadsheet with a row of data showing the appropriate quarterly results for those dates. Let's say the data for this is displayed A1 through to A44.
For the yearly per quarter averages, let's say they are to go from B1 through to B11, I know I could put, for each year, an average formula with the relevant data range. Finding this to be tedious, I tried to fill-down.
I learnt the hard way however (not being too aware of how excel's grammar ticks) that the fill down function will not work for me. i.e., if B1 contained the average for the data range A1:A4 (the four quarters of 1998), the filled-in B2 would have the data range A2:A5 (i.e. the 2nd quarter of 1998 through to the 3rd quarter of 1999).
I need to use the ADDRESS function to define a range from which an average can be determined. My current function is as follows:
View 3 Replies View RelatedCustom average function. can this be done with Worksheet functions:
View 4 Replies View RelatedHow do I perform average for a range and be able to exclude outliers. For example I am taking 100 measurements, some are not measureable and recorded as 9999.9. How do I average 100 values, but exclude all the 9999.9?
View 7 Replies View RelatedEach sheet contains the test data for an individual class and I am trying to create a "Totals" sheet where I can show the average that each class had on a particular test and the letter grade breakdown. I am trying to create one 'average' formula that I may then copy across that will change the sheet reference automatically without me having to manually re-create the formula every time I add a new class sheet. I tried using the INDIRECT function but could not get it to work. Keep getting #Ref error.
View 3 Replies View RelatedI will attempt to make this as easy as possible in explaining something I am looking to do. I am looking to Calculate the average lifespan of an individual based upon
1) They are "dead" (A status,either "Alive" or "Dead" found in Data!F2:F653)
2) They were born between 1/1/2007 and 12/31/2007 (Delivery Date provided in Data!C2:C653)
The lifespans were provided on Data!E2:E653
Is there a way to include an if then else function to an average formula that will skip cells with zero?
I went into better detail in the attached example.
I have data in Column A as follows:
A1 15
A2
A3 20
A4 56
A5 45
A6
A7 71
A8
A9 23
where cells A2, A6 and A8 are empty.
I want to be able to AVERAGE or SUM the first four nonblank cells. I know I could manually select the cells, but I have a spreadsheet with 30 columns and 40 rows, and the data (including empty cells) in each column is different.
Is there a single formula that will find the first four nonblank cells and then perform the AVERAGE or SUM function?
I'm trying to find the best Macro or Formula to get this done.
Sheet 1 has a list of salesperson in column "A" and the total numbers they made on Monday (in the same row, column "E"), Tuesday (In the same row, column "F"), Wednesday (In the same row, column "G"), Thurday (In the same row, column "H"), and Friday (In the same row, column "I"). I also have a sheet for each individual salesperson. I need to find a Macro or a Formula that I can use to give me the average of the numbers if "A5" = the salesperson in Sheet 3 then avarage the numbers from "E5" to "I5" and I want the results to show up in cell "D35".
I wonder if it is possible to formulate a formula in which average values are recalculated after every added record.
For example:
Record 1 shows an amount of 200 so the average value after 1 record is (200/1) 200. Record 2 shows an amount of 250 so the average value after 2 records is ((200+250)/2) 225. Record 3 shows an amount of 210 so the average value after 3 records is ((200+250+210)/3) 220.
I don't want to calculate all averages manually and most probably there must be a formula that is able to recalculate the average value after another record is added to the file.
I need some assistance in using an array formula which averages based on multiple arguments. The relevent range names in my input data are:
Col A - Manager Col B - Report Type Col C - Days taken to Complete
and I have used Validation Lists to include several different Managers and 5 Report Types which I'll call A - E, with Days taken to Complete an input. Each Manager may have 0 to numerous instances of each report during each period.
I'm trying to build a table which includes each manager and the average number of days taken to complete each report. The complication is that, while Report A & B are separate reports, for this purpose I need to get an average for A & B together.
For C, D & E, I have used the following:
{=AVERAGE(IF((Type="C")*(Manager="Smith"),Days_taken_to_Complete))}
For A&B, I have tried:
{=AVERAGE(IF((Type="A")*(Type="B")*(Manager="Smith"),Days_taken_to_Complete))}
but this doesn't work. Could someone please advise me the correct formula if either of two states in a named range are to be used to average a second named range?
I am working with averages of ACT scores and Class rank percentages. I cannot figure out how to exclude all the zeros and/or DNR (do not rank) values that are in those columns. For example if I have 10 items, and 2 are DNR, the I want to exclude the 2 DNR's in my average. I tried putting it in the Row or Column area and unchecking what I wanted to exclude and then drag it into the data area, but that didn't work either.
View 2 Replies View RelatedIf I have numeric values in a cell examples c5 = 126, and d5 = 135. How do I place these values in c5 &d5 in another cell as a cell reference within the formula ex: =Average(f126:f135)
View 3 Replies View RelatedI have a spreadsheet that contains developer related data. I want to be able to do a weekly analysis of average construction time and costs. The problem I am running into is properties enter rehab phase and exit rehab phase throughout the week.
For example:
I want to know the average $ spent and total rehab time week 1 of april. I may have 4 homes that entered rehab that week and 3 that move out of rehab that week. Moreover, I need to ensure those homes that entered and are still in rehab for that week are counted. How do I accomplish this feat?
I am working on an excel master marksheet which will be distributed to many teachers to fill in their students marks. How can I enter an average function that can work out the mean for those different classes. For example I'd like the main average function to be like this =average(d5:d50) but if a teacher has thirty students in his list the mean will be only limited to the marks of those thirty students. Same thing I want for the mode function and the median function.
View 7 Replies View RelatedThis time I have a situation like this:
Column A - Dates
Column B - Equipment Type
Column C - Load Start Time
Column D - Load End Time
I need to do some statistical analysis (average, mode, medium, st dev) on the load times, which is load start time - load end time. As far as I know, I can't subtract ranges (column d i column c) within Averageifs function. I assume I would need to use an array function for this.
Actually with the help of array formula I"m taking out Average, Min, Max value of ranges and I was omitting zero but the problem is occurring that if i have originally zero in my ranges then Average & Minimum function is not working properly.
View 8 Replies View RelatedI'm trying to use the average if function to average a range of numbers, only if a different range of numbers numbers equal a number in two different cells.
ex. average A1:F1 if G1:L1 equals M1 or M2