I'm looking for a short snippet of code to cut all rows with the string "W2 - No P.E Kit" in column E of the Raw Data tab into a tab called No kit. I don't want gaps in the rows of the Raw Data tab however.
View 4 RepliesI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
I am trying to paste data from one sheet to another using their string but not getting the logic.
below is the example for the same.
Sheet1 - data source
A
B
C
ABC
56.32
45.65
DEF
26.5
23.6
Sheet2 - Data needs to be pasted
A
B
C
DEF
23.65
36.65
XYZ
23.65
12.65
PQR
15.23
25.65
ABC
65.59
65.26
MNL
26.65
23.65
Value contains in Column B and C for ABC & DEF should replaced by the values in Sheet1
I am working with flight numbers and want to split out the letters from the digits. Examples,
BA1234A
BA123
EZY4566H
BE7893B
In column A I need the first two or three letters only,
BA
BA
EZY
BE
In column B I need everything to the right of what appears in column A
1234A
123
4566H
893B
etc.
I have a string that has an IP that doesn't follow a fixed length.
Eg:
10.248.242.65Microsoft SQL Server Compact 3.5 Service
10.248.242.5EOL/Obsolete Software: Oracle Java SE/JRE/JDK 6/1.6
10.248.251.144Microsoft Sync Framework Service Pack
seperate that IP and the String. I tried the below formula =REPLACE(A2,MIN((FIND({"M","E","S"},A2))),0,"?")
It works fine for the above examples, but i want a formula that can seperate the string after the IP ranging from A-Z or a-z
getting any formula so that i can determine atleast the position of the First Letter(A-Z,a-z) from left.
I have the data like this :
03/07/2009;31267400;78168 in Cell A5
And here i want change that data like this :
Cell A6 = 03/07/2009
Cell B6 = 31267400
Cell C6 = 78168
On sheet one, in the column column C I have cells which have characters separated by a space character (For example cell C3 looks like this: "L C"; cell C12 looks like this: "S BF54FR"). There are only a few cells which have more than three characters. The characters are separated by a space character. I would like the macro to do the following: take out each on of the character in put in the same row next column. (For example if in column C has the value: "L C" then in the same row column D should have the value "L" and column E should have the value "C". Or if column C was "S BF54FR" then column D should have the value "S" and column E "BF54FR".
View 6 Replies View RelatedIs there any way to create a macro for the following:
I have the following format
First Name MI Last Name in Column A.
Sometimes there is a space on the last name for someone with a last name Mc Cormick (for example)
Also, sometimes the list of names is short and sometimes the list of names is long. Is there a way to get a "universal" macro in place, that will not depend on the number of names in the list but will be able to detect when the list ends?
So far I was able to run the macro to get them from text-to-column into cells A, B, and C. However, the middle column sometimes contains the last name if there isn't a middle initial. I need a way to test the middle column for more than one character. If there is more than one character, it is a last name and needs to be in the third column.
Is there a way to separate text from numbers, (other than text to columns)
My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
Is there a way to separate text from numbers, (other than text to columns)
My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
I have a script to import all the data in a text file into an excel sheet. However, the data that is imported are in the first column of every row.
for e.g.
123454566788329929201012827192019128278111111111abc213123123123123
there is no comma nor / to separate the string of alphanumerics is there any vba script that i can incorporate to separate the first 3 digit in the first column then 5 digit in the second column then 7 digit in the 3rd columns and etc.
I have one column that has forename and surname information and I need to separate the surname into a separate column next to the forename.
Is there a formula for this?
I've tried the formula where you can request to move so many characters to the right, but it's difficult with all of the surnames being a different number of characters.
I am in need of a formula that will separate a string of text. Specifically, I want to pull out the number values (including cents) from the rest of the text. This is how the text reads:
10.00 OVERDRAFT PROTECTION TRANSFER FEE
10.00
56.00 ELECTRONIC/ACH DEBIT
56.00
199.00 ELECTRONIC/ACH DEBIT
199.00
2,017.64 ELECTRONIC/ACH DEBIT
2,017.64
The data to the left is the data I am working with and the I want the results to read similar to the results on the right.
Can I paste text inside a box on sheet 1 that automatically paste into a cell in sheet 2? I'm trying to make sheet one look more like a web page. I want to be able to create text boxes on sheet one that will automatically copy the text into a certain cell in sheet 2. Seems like I seen something a long time ago where you go to sheet2 and in the cell you want the text to show up, you type in something like =sheet1 box1 .
View 1 Replies View RelatedI have address that sits in one cell only and I need to separate into two or three columns (streetname, street number, streetletter).
Is this possible as the length of street text, numbers and letter differs all the time...
Attached is a sample file with before and after result
address.xls
I am trying to split a string into separate cells. I have managed to generate the formula for the description and first dlr value in the string but I am have trouble figuring out how to build functions for the rest of the string.
Example attached.
I have this export containing HTML content in each cell. I need to filter out a specific code from the links included in the HTML.
HTML Code:
<some HTML>
<a href="http://site.com/content/GE6053" class="button"><span>Text</span></a>
<a href="http://site.com/content/GE123" class="button"><span>Text</span></a>
<some HTML>
I need to get the string GE#### before each " class="button"> and copy it on a cell on the right. There are other links of this format [URL] ..... in the cell, but I am interested only the ones that have " class="button"> after it.
The length of the ID after GE can be 2, 3, 4 or 6 characters long. But I am ok with getting GE + 6 characters following it as that means I would get something like GE12" cl and I will delete the extra character by doing a find/replace.
I have a large sheet of data I'm trying to sort through. Each row of data has a column that contains a long string description. Each of these strings contains a three letter codes in all caps that I want to be able to pull out. I have a seperate sheet that has all of the possible three letter codes in one column. Is there a formula that can compare each string of text to this list of three letter codes and if it find a match put that code in a column on the original sheet?
Doc Number
String
Code
33333
This is an example string of text. An example three letter code would be HCB. The location of the code within the string varies.
HCB
33332
This is an example string of text. An example three letter code would be CDQ. The location of the code within the string varies.
CDQ
33331
This is an example string of text. An example three letter code would be RCA. The location of the code within the string varies.
RCA
Codes
DCP
HCB
RCA
CDQ
LCP
DCA
SCR
I would like to "reverse concatenate" an address text string as follows: ....
View 9 Replies View RelatedI need a VBA function to extract number sequences from a string and separate them with hyphens In the example below cell A1 has the value 'xx2 yyy34 zz515' The code must produce the value '2-34-515' from the above example I have the following function that extracts the numbers but need a way to separate the groups with a hyphen
Code:
Function parseNum(strSearch As String) As String
Dim i As Integer, tempVal As String
For i = 1 To Len(strSearch)
[Code]....
I have a string of data coming from a SQL Server data connection into my workbook. The value in the column is a text string that is pipe delimited. I need a macro to parse the data from that column into applicable separate columns. I would typically use text to columns for this and parse it out manually... but the tool I'm creating is one of the automated variety, so that will not suffice for this application. I need it to do this automatically when the data connection refreshes.
U:U AQ AR AS AT AU AV
to
Produce|Fruit|apple|banana|cherry|date Produce Fruit apple banana cherry date
I'm trying to figure out how to copy & paste the following conditional formatting down the column.
The conditional formatting I'm using is in cell A1, D1, G1, J1, M1 (so I have to Ctrl click each cell manually & I then choose to "format the values that rank in the:" "bottom 1" & format it green.
I want to copy and paste that all the way down column A, D, G, J, & M and have the conditial formatting pick for each row, not the whole column. eg. A2, D2, G2, J2, M2... A3, D3, G3, J3, M3...
I am trying write code withVBA to save separate file in a different folder with Loop.
Write a code with "loop" till it finds empty cell in the column and for every change in number a separate file needs to be saved in specified folder with file name as "10010, 10011,10012... and so on with data copied in the file saved.
Below is the data.
10010
10011
10011
[Code] ....
I am trying to work out some code that will allow me to search worksheet2 to find the last filled cell in column A.
I would then like to copy the contents of the cell.
Then past this data into the first empty cell in a column in worksheet2
I am using Excel 2007
I have a spreadsheet with 1,000 rows in multiple columns
In column "B" i have 8 unique names.
What I am trying to work out is to copy and paste all the rows for each unique name and save in a separate workbook named as the unique name.
Attached is my code, pay attention to the bold part. I want the sourceSheet to be copied as a sheet and pasted in the targetSheet (the Sheet2 of "NewBook") but I want it pasted asvalues. Here is the specific part which needs to be looked at...and below is the full code.
VB:
Set sourceBook = Application.Workbooks.Open(sourceFilename)
Set sourceSheet = sourceBook.Sheets("Current")
Set targetSheet = NewBook.Sheets("Sheet2")
[Code].....
copy/paste Every Sheet Single ( P Column ) and Paste to Notepad and take P1 As file name for note pad.
View 1 Replies View RelatedI have the cell data as below
How would I split into a new column the first part which is a date into a new column, then the country and the remainder into separate columns?
I still want the original data as I need to check that the splits worked well?
16.5.90 CH 1671/90-4
18.10.1991 CH 3056/91-1
24.07.92 ch 2341/92-2
30.7.92 ch 2395/92-3
18.11.92 Us 3533/92-5
26.5.93PCT 1577/93-0
9.8.93 CH 2363/93-8
17.8.93 CH 2445/93-0
25.1.94ch209/94-6;8.12.94ch3714/94-1
25.1.94 ch 209/94-6 ; 8.12.94 ch 3714/94-1
8.4.94 ch 1047/94-0
22.4.94 ch 1255/94-7
18.11.1992 CH 3533/92-5
18.11.1992CH 3533/92-5