Separate Text From Numbers In A String
May 30, 2002Is there a way to separate text from numbers, (other than text to columns)
My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
Is there a way to separate text from numbers, (other than text to columns)
My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
Is there a way to separate text from numbers, (other than text to columns)
My data is all different lengths, nothing consistent,plus I want to put the separated data in another column.
I am in need of a formula that will separate a string of text. Specifically, I want to pull out the number values (including cents) from the rest of the text. This is how the text reads:
10.00 OVERDRAFT PROTECTION TRANSFER FEE
10.00
56.00 ELECTRONIC/ACH DEBIT
56.00
199.00 ELECTRONIC/ACH DEBIT
199.00
2,017.64 ELECTRONIC/ACH DEBIT
2,017.64
The data to the left is the data I am working with and the I want the results to read similar to the results on the right.
I receive an extraction from AutoCAD that lists the electrical devices in a drawing. I don't have any problems extracting the letters. I have a problem extracting the device number and the device number extension.
The device label extraction is similar to this:
DCM1005-1
DCM1005-10
DCM1005A
MTR1005-1
MTR1005-10
MTR1005A
I want to create 3 columns from the device label: (I separated the column with commas)
A1, B1, C1, D1
DCM1005-1, DCM, 1005, 1
DCM1005-10, DCM, 1005, 10
DCM1005A, DCM, 1005, A
MTR1005-1, MTR, 1005, 1
MTR1005-10, MTR, 1005, 10
MTR1005A, MTR, 1005, A
I'm trying to separate text from numbers into two separate cells...
Essentially, I would like the users to copy and paste data into Column A, as seen below. Then, hopefully by formula separate the text characters into Column B and the numbers into Column C.
Input: Output 1: Output 2:
Col A Col B Col C
Wells 123 Wells 123
Wells 1234 Wells 1234
Wells Fargo 123 Wells Fargo 123
Wells Fargo 1234 Wells Fargo 1234
Wells Fargo Inc 123 Wells Fargo Inc 123
Wells Fargo Inc 1234 Wells Fargo Inc 1234
Ideally, I would like to do this with a formula...
I have the cell data as below
How would I split into a new column the first part which is a date into a new column, then the country and the remainder into separate columns?
I still want the original data as I need to check that the splits worked well?
16.5.90 CH 1671/90-4
18.10.1991 CH 3056/91-1
24.07.92 ch 2341/92-2
30.7.92 ch 2395/92-3
18.11.92 Us 3533/92-5
26.5.93PCT 1577/93-0
9.8.93 CH 2363/93-8
17.8.93 CH 2445/93-0
25.1.94ch209/94-6;8.12.94ch3714/94-1
25.1.94 ch 209/94-6 ; 8.12.94 ch 3714/94-1
8.4.94 ch 1047/94-0
22.4.94 ch 1255/94-7
18.11.1992 CH 3533/92-5
18.11.1992CH 3533/92-5
I have a script to import all the data in a text file into an excel sheet. However, the data that is imported are in the first column of every row.
for e.g.
123454566788329929201012827192019128278111111111abc213123123123123
there is no comma nor / to separate the string of alphanumerics is there any vba script that i can incorporate to separate the first 3 digit in the first column then 5 digit in the second column then 7 digit in the 3rd columns and etc.
I have one column that has forename and surname information and I need to separate the surname into a separate column next to the forename.
Is there a formula for this?
I've tried the formula where you can request to move so many characters to the right, but it's difficult with all of the surnames being a different number of characters.
I have address that sits in one cell only and I need to separate into two or three columns (streetname, street number, streetletter).
Is this possible as the length of street text, numbers and letter differs all the time...
Attached is a sample file with before and after result
address.xls
I have this export containing HTML content in each cell. I need to filter out a specific code from the links included in the HTML.
HTML Code:
<some HTML>
<a href="http://site.com/content/GE6053" class="button"><span>Text</span></a>
<a href="http://site.com/content/GE123" class="button"><span>Text</span></a>
<some HTML>
I need to get the string GE#### before each " class="button"> and copy it on a cell on the right. There are other links of this format [URL] ..... in the cell, but I am interested only the ones that have " class="button"> after it.
The length of the ID after GE can be 2, 3, 4 or 6 characters long. But I am ok with getting GE + 6 characters following it as that means I would get something like GE12" cl and I will delete the extra character by doing a find/replace.
I have a large sheet of data I'm trying to sort through. Each row of data has a column that contains a long string description. Each of these strings contains a three letter codes in all caps that I want to be able to pull out. I have a seperate sheet that has all of the possible three letter codes in one column. Is there a formula that can compare each string of text to this list of three letter codes and if it find a match put that code in a column on the original sheet?
Doc Number
String
Code
33333
This is an example string of text. An example three letter code would be HCB. The location of the code within the string varies.
HCB
33332
This is an example string of text. An example three letter code would be CDQ. The location of the code within the string varies.
CDQ
33331
This is an example string of text. An example three letter code would be RCA. The location of the code within the string varies.
RCA
Codes
DCP
HCB
RCA
CDQ
LCP
DCA
SCR
I would like to "reverse concatenate" an address text string as follows: ....
View 9 Replies View RelatedI want to separate the texts and numbers in a column A1.Please find the attachment.
sampleworkbook.xlsx
creating a formula to separate the text from the numbers into 2 separate columns.
Examples are:
A1= Angel Romero 260.00
A2= Wieben Chiropractic Clinic 74.00
A3= R Ricardo Ramirez Dds 340.00
The 'Text to Column' function does not work because there is no fixed width and no deliminater. To add in a deliminater, like a "", is an option but there are thousands of cells to do this to.
As you can see, using LEFT, RIGHT and MID functions become tricky since the deliminater would be a "space" but there are often several "spaces" in the string of characters.
Is there a way to SEARCH or FIND the first number and let that be the deliminater?
I have cell with lot of texts, punctuations and numbers all mixed together,
example :
private-4089 AND road ESCORT,trailer-4111 & test vehicle
I need to remove all texts and keep the numbers only: 4089, 4111
then I hope I can do text to column to put each number in a cell
I have text in column F that have numbers at the begining of the text. Unfortunately not all the number are of the same lenght. what is the way I can separate them from the text.
example:
87VADTREVINO GROUP79403HEITKAMP SWIFT7O554HEITKAMP SWIFT
Suppose I have SPSS/HR/AF00093, and I want to take from right just 00093, how it is possible?
I want to do this in excel sheet...
I know I can use text to columns to do this. I have horse results listed in column A as follows 3.5L (i.e. 3.5 lengths), 4L and so on. Every number ends with an L. I want a formula in column O that just gives me the number as below:
3.5L 3.5 (in column O)
4.5L 4.5
and so on.
I want to separate the text and numbers into two different cells. Basically, I have the entire drawing details in one cell and I need to split it up, e.g. I have:
KEEP PLATE 902 4 0002
STOOL 525 4 0199
PACK PLATE 525 4 0200
PACK PLATE 525 4 0201
PACK PLATE 525 4 0202
table.tableizer-table {border: 1px solid #CCC; font-family: Arial, Helvetica, sans-serif; font-size: 12px;} .tableizer-table td {padding: 4px; margin: 3px; border: 1px solid #ccc;}
.tableizer-table th {background-color: #104E8B; color: #FFF; font-weight: bold;}
florida golf found 4 time(s) in 21 Title words (Density: 38.10%) florida golf found 7 time(s) in 25 Meta Description words (Density: 56.00%) florida golf found 8 time(s) in 49 Meta Keywords words (Density: 32.65%) florida golf found 2 time(s) in 18 Heading(s) words (Density: 22.22%) florida golf found 18 time(s) in 191 Alt tag(s) words (Density: 18.85%) florida golf found 14 time(s) in 470 Linktext words (Density: 5.96%) florida golf found 5 time(s) in 210 Bold text words (Density: 4.76%)
I am working with reference numbers which follow the following format:
first section:
E
G
WS
Second Section
PH
PP
HBP
PR......................................
I have some data that is both text and numbers in the same cell. I would like to split the the data so that the text is in one column and the numbers are in another column.
The numbers are all a fixed length (15 chars) so I know that I can use the following formula = RIGHT(A1,15)
However I am not quite sure how to split the text as the length can vary as as well as the number of words in the string.
For example A1 is 1 word with 7 characters but A2 is 2 words, 14 characters long inc space.
A1 Goodwin 000710280740120
A2 Gillette Ridge 000715058510122
B1 Goodwin
C1 000710280740120
B2 Gillette Ridge
C2 000715058510122
I have thousands of lines of data that are of the following form:
Jackson, TN 9623 BCBS TN 98 UnitedHlthCare 2
Jacksonville, FL 3577 Aetna 47 BCBS FL 37
Knoxville, TN 3796 Cariten 44 John Deere 41
Lakeland-Winter Haven, FL 2165 UnitedHlthCare 31 Aetna 29
I need to separate these lines into columns such that, for example, the first line would be in 6 columns: (Jackson, TN) (9623) (BCBS TN) (98) (UnitedHlthCare) (2)
The delimiter does not work because some of there is no one character that always separates the text and the numbers. I've tried going through in word and typing something like '%' where I want to separate, but with thousands of lines of data that is extremely tedious.
Is there any formula I can use that would be capable of solving this?
I'm pulling phone numbers out of text strings. There is text string ("Office:") indicating that the number following is an office number (the number that I need). MID and FIND take care of this. There are sometimes two instances of office numbers in single text string, so adding a second column using the third argument of FIND lets me start another search past the first instance of an office number. We have a bunch of office numbers with the qualifier "(Text)" after the original "Office" but before the phone number. How do I catch these ones?
View 8 Replies View Relateda formula to extract the numbers into two separate fields. The text may vary in length and the numbers vary in length also from 1 digit to 2,000,000.
Data in A1 is as follows:-
Meter reading Old:1345 New:67890
Actual
Result
london#123;new york#34;
london;
new york;
delhi#145;chennai#54;
delhi;
chennai;
hyderabad#748;
hyderabad;
[code]....
removing the # and numbers from text and add new line after ; symbol. So it would save me a lot of time in preparing status.
I am trying to extract numbers after a specific text in a text string, for eg :abc SN 12345 xyzedf SN No. 456 mnoAs per above, i want to extract any numbers afters "SN". the numbers can be vary in digits i.e. it can be 3 digit numbers or 4 or 6. Also, at times there is some other text in between (like SN No.) numbers and search word (i.e. SN)Any formula to get result as "12345" and "456".
View 5 Replies View RelatedI am struggling with a problem which involves a column with both the text and nos in that. I want to calculate the following formula.
Total = the Sumproduct of the nos in the description*Length*Width*Height.
In the description column,
1) The nos will be varying i.e x*x or x*x*x or X*x*x*x*.
2) After the nos there will not be any data.
Example table:
Work Description
Length
Width
Height
Total
Parapet wall 2x4x8
12
2
4
6144
[Code] .......
Is there a way to achieve this, what is the formula for this ??
In a data report i have a column which contains a mix of text and may contain an 8 digit number which could start in 0.
for example
in column A i could have "Hello how are you 01237232 I am fine"
I wish to extract the number into a seperate column, and would ordinarilly use a mid or left/ right function, however the text infront and behind the number will vary in length, which means i cannot do this.
The number will always be 8 digits, could start in 0 but will not always, and it may not be present in all the cells in this column.
How I an achieve this?
I have several lines with text strings containting three numbers in each line. I need a code to extract all three numbers from each text string. The numbers can be placed on the following columns in each row.
View 2 Replies View Related