Sum Numbers Checked By Forms Check Box
Dec 6, 2008
I am creating a worksheet that has multiple pricing options. Next to each pricing option is a form control check box. I would like the worksheet to automatically total the checked rows only. I have linked the check boxes to the corresponding cells with pricing. I did not use Active X controls.
View 2 Replies
ADVERTISEMENT
Apr 15, 2008
After a user has selected the required option buttons, is there a way to disable them without deleting, so that they are still visible (for history tracking) but not modifiable?
'09-- Check metrology info
If Worksheets(" Split Lot Info").MetrologyYes.Value = True Then
Worksheets("Split Lot Info").Shapes("MetrologyYes").Enabled = False
Worksheets("Split Lot Info").Shapes("MetrologyNo").Enabled = False
If Worksheets("Split Lot Info").MetrologyNo.Value = True Then
nResponse = MsgBox("Are metrology steps set up?", vbOKOnly, "Missing information")
Worksheets("Split Lot Info").Shapes("MetrologyYes").Enabled = False
Worksheets("Split Lot Info").Shapes("MetrologyNo").Enabled = False
End
End If
End If
View 3 Replies
View Related
Jun 15, 2013
I am using an array from another application for option buttons. I have attempted to adapt this code for checkboxes but with no success.
VB:
Option Explicit
Private Sub cmdadd_click()
Dim wrs As Worksheet, i As Long, x As Long
[Code]......
View 5 Replies
View Related
Jun 2, 2009
I want the name of a check box to change when it is checked or unchecked. I have a box where it is working just fine. I was given assistance to the initial code and have been using that code to create the same scenario with other check boxes on my sheet, but receive errors. I have been trying to decipher the problem to no avail. Can someone look at my codes and explain why when I copy the same formula it is not working.
The UN-Check All / Check All button is the working check box. I am trying to apply the same function to the four boxes next to Check Date and GL Post date fields.
I have reset all codes except for the last check box #34, which I have left so the error can be looked at. What I want it to do is when checked I want the name to be "Payroll GL Post Date" When Un-checked the name should be "Adjustment GL Post Date"
View 2 Replies
View Related
Oct 20, 2008
Is there a way I can make my check box change color when it's checked? I'd like to have it uncolored and then turn green when checked. Not the cell, but the checkbox itself. I can't seem to make the check box part of the cell, if that would be an easier route to go please let me know. If I have to turn the cell green and not the check box, I'd love for the whole row to turn green.
View 3 Replies
View Related
Apr 25, 2008
I am trying to create a form and I want the form to put values on certain spaces when box is checked. For example:
apples unchecked box
pears unchecked box
and so on.
I an going to create a list like this
apples
pears
and so on
total
If I check any of th boxes, I want a certain price to be posted besidesmy listand at the bottom to give me a total.
This is just an example of what Im going to do. No I am not creating a shoping list I just want to learnesd how to create the boxes and run macros.
View 9 Replies
View Related
Jul 5, 2008
Qtn.1 - Do i use 'Conditional formating' under 'Format' to change colour of Check-box text when 'checked'
I.e when ticked >> change colour of text to red
Qtn2 - If yes-, what's the syntax to put in 'Conditional formating' ?
View 9 Replies
View Related
Sep 8, 2007
I have created checkbox for all the rows of items in sheet1 so that they will be able to select and then copy to sheet2.
example:
If a checkbox at row 1 in sheet1 is selected, the entire row (which the checkbox represent) will be copy into sheet2 (which would have the same column headers).
If a checkbox at row 2 in sheet1 is not selected, nothing will be done there.
If a checkbox at row 3 in sheet1 is selected, then the entire row of 3 in sheet1 will be copy again into the next avalible row in sheet2 (in this case, row 2 in sheet2)
.
.
.
There will be other informations at the beginning (top) of each excel worksheet which does not need to be touch at all. Only the data portion (starting column C row 16 in sheet1 and column A row 16 in sheet2) will need to have the above function.
View 9 Replies
View Related
May 8, 2008
I have a Userform which has a series of Frames that contain Option Buttons. What I would like to do is check that an option button in each of the frames has been selected. If there are any missing then I need to inform the user - I would like all frames to be checked at the same time on the click of a button.
View 2 Replies
View Related
Feb 28, 2009
My problem is trivial but annoying. When I initiate my user form, one of the check boxes has a dashed border around the outside as if it was selected. No matter what I try, I cannot get the form to initialize without effecting this box. If I delete the box and recreate it, another box simply inherits this problem.
I have attached the spreadsheet, please Click the button over "A1" to see what I mean if you have the time.
View 2 Replies
View Related
Sep 5, 2009
I have a macro to that clears my excel cells. I have added "forms check boxes" that need to be cleared at the same time. Can this be done with code that i can add to the macro or does it need to be seperate?
View 9 Replies
View Related
Aug 30, 2006
code below whould return value "a" to specified range(s) The cells are formatted Marlett, 10pt, black, bold, center. Should return a nice tick mark to the specified range if selected shape has value of 1. I double chk'd the name of the shape referred to in code and it is correct Yet value of "a" is not returned, though the chkBox is "ticked". What else can I check?
Option Explicit
Sub cv_ReviewCheckBoxes()
Dim wbBook As Workbook
Dim wsNotesLoose As Worksheet
Dim wsCoinRolled As Worksheet
Dim wsCoinLoose As Worksheet
Dim wsSummary As Worksheet
With Application
.Calculation = xlCalculationManual
.DisplayAlerts = False
. ScreenUpdating = False
End With.........................
View 3 Replies
View Related
Jul 28, 2006
I have numerous hyperlinks in cells on a worksheet, next to these I have checkboxes. I am looking for a macro that will check if the boxes are checked and if not ignore them and if so run a certain macro.
View 6 Replies
View Related
Oct 24, 2008
I have a list of numbers that I have to concatenate with another number depending on if it falls within the parameters and I don't know how to do a lookup on that. I currently am using a complex if/or/and statement which is too dificult to debug and extremely complex like this: if(OR(AND(a>=1,a<=10),AND(a>=20,a<=30)),concatenate(a,"123"),if(OR(AND(a>10,a<20),(a>30,a<40))),conc atenate(a,"456"),"a is not in the parameter")
is there a way to do a lookup for this?
Something else to throw into the mix, there are some ranges that shouldn't be there and return nothing so from 40-55, there shouldn't be a result.
also, there are some that are just one number (56 gets 789 but then at 57 it goes back to abc)
View 7 Replies
View Related
Apr 8, 2012
I want to do a check with one cell that has a list of a maximum of 4 numbers seperated by a comma and space, with 4 cells that have one of these numbers in each of them. The numbers wont be in the same order, and they wont be repeated.
Example
A3 = 4, 12, 19, 34
A4 = 12
A5 = 19
A6 = 4
A7 = 34
I only need to highlight if they dont match. So result could either be a tick or cell changes colour.
View 9 Replies
View Related
Dec 12, 2006
how to check if cells contain only whole numbers (cells are in text format)?
I do not know how the code is for the activecell checking
Example Range("A1:A10")
ColumnA
12345
12345
555,10
12345
1.20
A6666
12345
12345
12345
As soon the code hits a cell containing something other then numbers then Msgbox "Error"
Sub Check()
i = 1
Do Until Cells(i, 1).Text = ""
Cells(i, 1).Select
If Not Activecell.Text only numbers then
MsgBox "Error"
End If
i = i + 1
Loop
End Sub
View 9 Replies
View Related
Dec 17, 2006
I'm looking for a formula to check whether a given number is between two other numbers.
Example: I have a list of data items which give the following info:
A.......B..........C.........D
ID# Group Low# High#
1001 food 12345 13960
1003 soap 27192 32245
2004 tires 93471 95532
2005 food 71174 76772
2006 soap 33183 36591
Such a list is many hundred of lines long.
Then I have other data which provides a Group ID and a product number, which number is likely to between the Low# and High# in the data list.
What I want is a formula to check whether the product number is between the Low# and the High#, AND that the Group matches.
Example: the data being supplied is Soap 28332. So, I want a formula to check through the data list, and if 28332 is between the Low# and the High# AND if the group SOAP matches, then give back the correct ID number.
Thus for the data Soap 28332, I would want the answer to be 1003, which is the ID # for soap in the given range.
A data listing of Food 73776 should give back the ID 2005, etc, etc. This list of data needing the correct ID# is thousands of lines long.
Thus I need a formula to check that the given number is within the low and high #, and that the group designation matches. If so, then give back the correct ID#.
View 14 Replies
View Related
May 23, 2014
I need to judge whether a number falls between a range of 2 numbers.
Ex:
A1=332.024 B1=349.956
C1=335.23 So D1 must give 1 (since between the range) else 0.
If C1=332.02 D1=0
If C1=349.9566 D1=0
If C1=332.024 D1=1
If C1=349.956 D1=1
What formula should be punched in D1?
View 8 Replies
View Related
Jun 5, 2008
I have a column of prices, I would like to have check boxes in a column beside the prices so that I can check the boxes and that they give me the sum of the prices that are checked.
View 9 Replies
View Related
Oct 24, 2009
I wanna create a buildin check digit for container numbers
so it will exists out of 11 cells. ( GATU 021097-9 )
is it possible when u type any letter/number in the first cell on a row it automaticly jumps to the next cell, repeating this for the full container number ?
View 9 Replies
View Related
Apr 28, 2006
I was wanting to use an IF Then statement to check if numberes entered into cells in Sheet1 were valid numbers in another sheet. The valid numbers will not always be consecutive.
View 2 Replies
View Related
Oct 17, 2006
Is there a way to see if a textbox is blank.. what I mean is, there may be some spaces in the text box which make it seem that there is something in the Textbox but all they are, are blank spaces.. no numbers in otherwords..
On a userform I have a textbox7 to enter in only the last 4 digits of the persons shop phone #. I have it coded that if the textbox isn't empty, it will put the required extension "X-" in front of it to identify it as a phone extension. If the cell is empty, it will remove it so it doesn't put the X- in the database without a phone #.
Finally the problem, if there are spaces in textbox7, no numbers, it will think that something is in there and put X- .. this messes up the database.
How do I check the textbox to see if it has numbers in there.. This is my code now...
' If TextBox7 is empty Then Phone = Blank
If TextBox7.Value = "" Then
PhoneC = " "
Else
' Preps Phone number with X- for extension
Fourdigit = TextBox7
Plus = "X-"
PhoneC = Plus + Fourdigit
End If
View 5 Replies
View Related
Jan 26, 2008
I have two columns A and B filled with numbers. Column A has the identifier number and Column B has number that represents intensity for the data set.
Column A can be anything from 75-1000, however, sometimes the adjacent rows are not sequential (i.e. 101, 102, 104).
1) Is there a way to automatically check for skipping numbers in Column A.
2) When it finds a skipped number, insert a row for column A and B.
3) Then put the correct number in Column A (i.e. 103) then put 0 in for column B
View 8 Replies
View Related
Jun 24, 2008
What I would like to do is have a macro check a column for any occurrence of a few different numbers, and then enter the text "n/a" in a different column of each row that one of the numbers doesn't appear in.
I have a list of part numbers that require a certain operation, and I'd like to mark off a cell for each item that does not require that operation. I've attached a simple spreadsheet that should help explain this better.
View 9 Replies
View Related
Aug 6, 2008
I'm having a hard time figuring out a solution for this situation. By the way I'm working in VBA macros. I need to check a cell for two things: if its empty or if it has something besides numbers in it. I know how to code the rest of what I need, but I'm just stuck on identifying if the cell has something else besides numbers inside it.
Possible entries would be "Isn't an enhancement" or "NOT A SIR", but I can't be sure those are the only things so I just generally need to check if there are any letters in that cell or not. One thing to note is that the contents of the cells are in text format and not number (the cell has a little green arrow in the top left that tells me about it). Any help would be appreciated, thanks in advance! Oh, just remembered, the number has to be 5 numbers long so I thought of using the Len() function but that doesn't cover things that are words under 5 letters like "None".
View 4 Replies
View Related
Oct 22, 2008
I am currently trying to automate some excells workbooks that my company uses. The one i'm working on is a listing of all the change orders we have. Unfortunatly there are roughly a 1000 rows, each containing the information for the change- change #, Date opened, part numbers, change description, status, date closed.
Order 0001 - 10/22/08 - 0156, 7251, 9901 - delete bag - closed - [blank] -
Order 0002 - 10/22/08 - 0018, 0612, 0875 - add notes - open - [blank] -
What I want to do is type a part number in, it checks to see if there are any rows that already have that number and have an open status (as apposed to closed) and then tells me where the conflict is. so in the above example if I typed in 0612 it would tell me that number is already in use. I am using excel 2003 if that makes any difference.
View 2 Replies
View Related
Jun 24, 2007
I posted my question on another site and didn't get very many responses. I've got a list of alphanumeric numbers that I'm trying to cross check against a bingo grid.
The bingo cards are in a PDF format, so here's a screenshot. There's a separate sheet for Red; White; & Blue.....
View 9 Replies
View Related
Aug 13, 2008
I need to compare for each trip whether there is a trip with Es and no Es in it and mark every line in column E with tag "Mixed Use". In the data below trip 2 has mixed use. I have attached a sample file.
Trip Employee EntertainmentMiles
Trip 1Employee 1E827
Employee 2E0
Employee 3E0
Employee 4E0
Trip 2Employee 1758
Employee 20
Employee 30
Employee 40
Employee 50
Employee 60
Employee 70
Employee 80
Employee 9E0
Employee 10E0
View 2 Replies
View Related
Aug 8, 2007
I have some code which, which I have modified it to create check boxes for all rows of data, but when I run it, it begins to wipe out the data, and create an endless column of numbers and check boxes. Here is the code:
Sub SelectCell()
Application. ScreenUpdating = False
Dim Z As Range
Set Z = Cells(1, 1).EntireColumn. Find("*", SearchDirection:=xlPrevious)
For i = 2 To Z
Range("A" & i) = i
Set cll = Range("A" & i).Offset(0, 1)
For Each shp In ActiveSheet.Shapes
If Left(shp.Name, 8) = "CheckBox" And shp.TopLeftCell.Address = cll.Address Then
shp.Delete
Exit For.......................
I have tried to set it to recognize how many rows are filled with number, give that to variable Z and then apply the code but it simply does not work.
View 7 Replies
View Related
Jun 30, 2009
I have a problem with a sumproduct formula which check one coloumn for negative numbers and another for a date so that it count all cases of negative numbers in a month i choose. (S contains numbers and AH contains dates)....
When i use it in a makro i get a "type mismatch" when i run the macro. I wonder if anyone can see where my syntaks is incorrect? Here is how it looks in the macro:.....
View 4 Replies
View Related