I need to judge whether a number falls between a range of 2 numbers.
Ex:
A1=332.024 B1=349.956
C1=335.23 So D1 must give 1 (since between the range) else 0.
If C1=332.02 D1=0
If C1=349.9566 D1=0
If C1=332.024 D1=1
If C1=349.956 D1=1
What formula should be punched in D1?
I have a list of numbers that I have to concatenate with another number depending on if it falls within the parameters and I don't know how to do a lookup on that. I currently am using a complex if/or/and statement which is too dificult to debug and extremely complex like this: if(OR(AND(a>=1,a<=10),AND(a>=20,a<=30)),concatenate(a,"123"),if(OR(AND(a>10,a<20),(a>30,a<40))),conc atenate(a,"456"),"a is not in the parameter")
is there a way to do a lookup for this?
Something else to throw into the mix, there are some ranges that shouldn't be there and return nothing so from 40-55, there shouldn't be a result.
also, there are some that are just one number (56 gets 789 but then at 57 it goes back to abc)
I'm looking for a formula to check whether a given number is between two other numbers.
Example: I have a list of data items which give the following info:
A.......B..........C.........D
ID# Group Low# High#
1001 food 12345 13960
1003 soap 27192 32245
2004 tires 93471 95532
2005 food 71174 76772
2006 soap 33183 36591
Such a list is many hundred of lines long.
Then I have other data which provides a Group ID and a product number, which number is likely to between the Low# and High# in the data list.
What I want is a formula to check whether the product number is between the Low# and the High#, AND that the Group matches.
Example: the data being supplied is Soap 28332. So, I want a formula to check through the data list, and if 28332 is between the Low# and the High# AND if the group SOAP matches, then give back the correct ID number.
Thus for the data Soap 28332, I would want the answer to be 1003, which is the ID # for soap in the given range.
A data listing of Food 73776 should give back the ID 2005, etc, etc. This list of data needing the correct ID# is thousands of lines long.
Thus I need a formula to check that the given number is within the low and high #, and that the group designation matches. If so, then give back the correct ID#.
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
I need to compare for each trip whether there is a trip with Es and no Es in it and mark every line in column E with tag "Mixed Use". In the data below trip 2 has mixed use. I have attached a sample file.
Trip Employee EntertainmentMiles
Trip 1Employee 1E827
Employee 2E0
Employee 3E0
Employee 4E0
Trip 2Employee 1758
Employee 20
Employee 30
Employee 40
Employee 50
Employee 60
Employee 70
Employee 80
Employee 9E0
Employee 10E0
I would like to check a 4 column range to see if a particular number has been added to a range of number.
this is the formula that I wrote but it does not test beyond the 2nd column.
=IF(OR((MATCH(3,COLUMN_D)),(MATCH(3,column_c)),(MATCH(3,column_b)),(MATCH(3,Column_a))),3,"")
Does anyone have an different way of check for this?
I need help to this : When i type a number to a cell and press enter , i want to check if this number exist in a range of cells (in sheet 2) , and if exists , excel show me a message. Actually i use it for my *** club. Number is the client code. When i writte 50 in a cell , i need from excel to check if this client own me money , and show me some message..
View 8 Replies View RelatedI'm trying to count the number of numbers within a given range.
Example Row Y has cells that contain a series of numbers 1,5,9,12,23. No cell in the range should have the same individual number more than once. At the end of row Y I want to know how many numbers, not the total of the numbers are within that range.
Y
1 1,3,5
2 21,32,44
3 12,19,31
..
40 2,4,18
41 total number of numbers in range Y1:Y40 - 12
To keep is simple. in a1:a5 are values 5,10,15,20,25. In c1 value is 13.
Need a formula to look at range a1:a5
And return only the next number higher than 13. Of course it's a3 or 15.
I have a range of cells (D10:D20) with numbers in them. I need cell A10 to look at D10 and return a specific number based on a set of criteria.
The same thing would go for A11:A20 & D11:D20.
If the number in D10 is 1-2 then A10 needs to display 0
If the number in D10 is 3-8 then A10 needs to display 0.1
If the number in D10 is 9-14 then A10 needs to display 0.2
If the number in D10 is 15-20 then A10 needs to display 0.3
Once I have that formula I know that i will just highlight A10 and drag the formula down through A20.
I have a range of values in column A, I wish to add all numbers by all other numbers, i.e for a specific value in the range, I want to add it to all the other values in the range, and output the values in a new range.
For example for values 1,2,3,4 in range A2:A5, I want to output a new range the values;
1+2 =3
1+3 =4
1+4 =5
2+1 =3
2+3 =5
2+4 =6
e.t.c, beginning in range B2. No number can be added to itself.
How do I truncate a range of numbers where a number will not show more than 2 past the decimal ....and this be in vba as part of a macro.
View 3 Replies View RelatedThis is a spreadsheet for a real estate office. The boss gave me a spreadsheet that he created to give a seller an idea how much money he will walk away with at closing. The spreadsheet includes all of the pertinate numbers but there is one item that he would like to have filled in automatically. When selling a house, you use a title service that charges a fee based on the price of the house. So, for example, If the house sells for $0 to $50,000, then let's say the fee is $112. If the house sells for $50,000 to $60,000, then the fee is $118. If the house sells for $60,000 to $70,000, then the fee is $125, and so on up to 1.5 million.
The boss' spreadsheet includes 5 different selling price scenarios, which I guess doesn't matter since you do the first one and the rest follow the same pattern.
So how do I automatically fill in a cell based on how one number falls within a range of other numbers? The fee schedule will be within the same spreadsheet, if that matters.
Ideally, I think they should be separate files, but this will be used in various locations as different realtors take it home or use it on their laptops.
I want to do a check with one cell that has a list of a maximum of 4 numbers seperated by a comma and space, with 4 cells that have one of these numbers in each of them. The numbers wont be in the same order, and they wont be repeated.
Example
A3 = 4, 12, 19, 34
A4 = 12
A5 = 19
A6 = 4
A7 = 34
I only need to highlight if they dont match. So result could either be a tick or cell changes colour.
how to check if cells contain only whole numbers (cells are in text format)?
I do not know how the code is for the activecell checking
Example Range("A1:A10")
ColumnA
12345
12345
555,10
12345
1.20
A6666
12345
12345
12345
As soon the code hits a cell containing something other then numbers then Msgbox "Error"
Sub Check()
i = 1
Do Until Cells(i, 1).Text = ""
Cells(i, 1).Select
If Not Activecell.Text only numbers then
MsgBox "Error"
End If
i = i + 1
Loop
End Sub
I have this set of number..
987654.
What im trying to do is this..I read this number and check for the first number with the 2nd number. If its greater then i will swap it. Im trying to do this so that my number can be rearranged as 456789.
I have a column of prices, I would like to have check boxes in a column beside the prices so that I can check the boxes and that they give me the sum of the prices that are checked.
View 9 Replies View RelatedI wanna create a buildin check digit for container numbers
so it will exists out of 11 cells. ( GATU 021097-9 )
is it possible when u type any letter/number in the first cell on a row it automaticly jumps to the next cell, repeating this for the full container number ?
I am creating a worksheet that has multiple pricing options. Next to each pricing option is a form control check box. I would like the worksheet to automatically total the checked rows only. I have linked the check boxes to the corresponding cells with pricing. I did not use Active X controls.
View 2 Replies View RelatedI was wanting to use an IF Then statement to check if numberes entered into cells in Sheet1 were valid numbers in another sheet. The valid numbers will not always be consecutive.
View 2 Replies View RelatedIs there a way to see if a textbox is blank.. what I mean is, there may be some spaces in the text box which make it seem that there is something in the Textbox but all they are, are blank spaces.. no numbers in otherwords..
On a userform I have a textbox7 to enter in only the last 4 digits of the persons shop phone #. I have it coded that if the textbox isn't empty, it will put the required extension "X-" in front of it to identify it as a phone extension. If the cell is empty, it will remove it so it doesn't put the X- in the database without a phone #.
Finally the problem, if there are spaces in textbox7, no numbers, it will think that something is in there and put X- .. this messes up the database.
How do I check the textbox to see if it has numbers in there.. This is my code now...
' If TextBox7 is empty Then Phone = Blank
If TextBox7.Value = "" Then
PhoneC = " "
Else
' Preps Phone number with X- for extension
Fourdigit = TextBox7
Plus = "X-"
PhoneC = Plus + Fourdigit
End If
I have two columns A and B filled with numbers. Column A has the identifier number and Column B has number that represents intensity for the data set.
Column A can be anything from 75-1000, however, sometimes the adjacent rows are not sequential (i.e. 101, 102, 104).
1) Is there a way to automatically check for skipping numbers in Column A.
2) When it finds a skipped number, insert a row for column A and B.
3) Then put the correct number in Column A (i.e. 103) then put 0 in for column B
What I would like to do is have a macro check a column for any occurrence of a few different numbers, and then enter the text "n/a" in a different column of each row that one of the numbers doesn't appear in.
I have a list of part numbers that require a certain operation, and I'd like to mark off a cell for each item that does not require that operation. I've attached a simple spreadsheet that should help explain this better.
I'm having a hard time figuring out a solution for this situation. By the way I'm working in VBA macros. I need to check a cell for two things: if its empty or if it has something besides numbers in it. I know how to code the rest of what I need, but I'm just stuck on identifying if the cell has something else besides numbers inside it.
Possible entries would be "Isn't an enhancement" or "NOT A SIR", but I can't be sure those are the only things so I just generally need to check if there are any letters in that cell or not. One thing to note is that the contents of the cells are in text format and not number (the cell has a little green arrow in the top left that tells me about it). Any help would be appreciated, thanks in advance! Oh, just remembered, the number has to be 5 numbers long so I thought of using the Len() function but that doesn't cover things that are words under 5 letters like "None".
I am currently trying to automate some excells workbooks that my company uses. The one i'm working on is a listing of all the change orders we have. Unfortunatly there are roughly a 1000 rows, each containing the information for the change- change #, Date opened, part numbers, change description, status, date closed.
Order 0001 - 10/22/08 - 0156, 7251, 9901 - delete bag - closed - [blank] -
Order 0002 - 10/22/08 - 0018, 0612, 0875 - add notes - open - [blank] -
What I want to do is type a part number in, it checks to see if there are any rows that already have that number and have an open status (as apposed to closed) and then tells me where the conflict is. so in the above example if I typed in 0612 it would tell me that number is already in use. I am using excel 2003 if that makes any difference.
I posted my question on another site and didn't get very many responses. I've got a list of alphanumeric numbers that I'm trying to cross check against a bingo grid.
The bingo cards are in a PDF format, so here's a screenshot. There's a separate sheet for Red; White; & Blue.....
I have some code which, which I have modified it to create check boxes for all rows of data, but when I run it, it begins to wipe out the data, and create an endless column of numbers and check boxes. Here is the code:
Sub SelectCell()
Application. ScreenUpdating = False
Dim Z As Range
Set Z = Cells(1, 1).EntireColumn. Find("*", SearchDirection:=xlPrevious)
For i = 2 To Z
Range("A" & i) = i
Set cll = Range("A" & i).Offset(0, 1)
For Each shp In ActiveSheet.Shapes
If Left(shp.Name, 8) = "CheckBox" And shp.TopLeftCell.Address = cll.Address Then
shp.Delete
Exit For.......................
I have tried to set it to recognize how many rows are filled with number, give that to variable Z and then apply the code but it simply does not work.
I have a problem with a sumproduct formula which check one coloumn for negative numbers and another for a date so that it count all cases of negative numbers in a month i choose. (S contains numbers and AH contains dates)....
When i use it in a makro i get a "type mismatch" when i run the macro. I wonder if anyone can see where my syntaks is incorrect? Here is how it looks in the macro:.....
I need to generate 8 (random) numbers which should range between 0 to 80 and the sum of those generated 8 numbers should be 80.? How can I achieve this.
View 14 Replies View RelatedI'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.