Sum Unique Values Formula
Jan 16, 2008
This question pertains to the solution offered by Dave Hawley in the following post: Sum Unique Values That Exist In Another Column. The original question relates to summing certain values in a column based on unique values in an adjacent column. I have tried the solution on my own, and it works quite well, however, I just can't understand how the "criteria" in column C functions.
ID XXX
1 100
2 200
1 100
3 500
4 600
2 200
--------------------
Total 1400
Assume your 2 columns are A & B and you wish to SUM column B where any unique value exists in the same row but Column A. Add headings to A1 & B1. In C1 Enter the text Criteria. In C2 Enter this formula =OR(COUNTIF($A$2:$A$100,A2)=1,COUNTIF($A2:$A$100,A2)>1). In any cell Enter =DSUM($A$1:$B$100,B1,$C$1:$C$2)
View 3 Replies
ADVERTISEMENT
Aug 14, 2014
1. Using a formula, I am trying to to obtain a list of unique values (string) (caveat: see #2) from the range E2:E10000 (arbitrarily chose 10000 - the row number is variable)(see #3).
I currently have a formula that seems to work for this purpose but I don't know how to add the condition in #2 (below)
2. To include all unique string values except those starting with the letters "IC"
3. Is there a way to make this formula so that it can only seek values up to the last row, and not go to the 10000th row if not necessary? The E column has no empty cells until after the last row that contains data.
Here is the formula I currently use which serves #1 (above):
[Code] .....
Any way to improve/simplfy this formula for the purpose describbed in #1? How can I add the condition in #2? Can you see a way to include #3? The most important issue here is #2.
Example of desired results:
Column A | Column B
AA | AA
DD | CC
AA | DD
CC |
DD |
DD |
IC |
IC |
View 14 Replies
View Related
Jan 7, 2010
here's the situation and what i'm trying to do:
each row/record is as follows:
column A contains zip code
column B contains zip code population
column C contains city name
columns D contains state name
there are multiple duplicates in each column.
i am trying to calculate the population for each city and place that data in each row in column E.
in order to do so, i need to add the populations (column B) of all UNIQUE zip codes (column A) for each city (column B) / state (column D).
View 13 Replies
View Related
Sep 18, 2013
I have the following macro (as part of a much bigger set of code that adds some formulas to to cells to return the total number of unique values. The problem is, this part of the macro takes over 10 minutes to run. Is there a quicker way of doing this or am I going to have to just wait it out each time.
The columns B and/or H is a formula. Column W is an string value.
FYI the last row it is counting to is between 4000 and 30000 lines in each of the formulas
Code:
Dim IRMatRow As Integer
Dim IRMisRow As Integer
Dim UKMatRow As Integer
Dim UKMisRow As Integer
IRMatRow = Worksheets("Matching Stats").Cells(Rows.Count, "H").End(xlUp).Row
[Code] .........
View 2 Replies
View Related
Dec 3, 2013
I have a query from an access DB that I pull into an excel sheet automatically every 15mins. Column G contains a list of 6 digit customer reference numbers and column C contains a list of the users that have modified records for that customer.
I use a summary sheet to count the number of customers a user has modified records for in that day. The trouble I am having is counting unique records using the COUNTIFS function. In my database if a user changes a record and hits save 10 times that will create 10 records. I only want to count this as 1. I am using the following formula but it doesn't seem to like the 2nd range and criteria in the countifs bit.
=SUM(IF(COUNTIFS('Daily Loss Data'!G2:G1500,'Daily Loss Data'!G2:G1500,'Daily Loss Data'!C2:C1500,"John Smith*")
=0, "", 1/COUNTIFS('Daily Loss Data'!G2:G1500,'Daily Loss Data'!G2:G1500,'Daily Loss Data'!C2:C1500,"John Smith*")))
Daily Loss Data Sheet Notes: Column C = user, Column G = Customer Ref.
I am using an IF statement because my range changes after each query refresh so contains zero's that I obviously do not want to count.
View 1 Replies
View Related
May 14, 2014
I have a very large table in Sheet 1, in the following range A10:1:3068.
Column C has the company name, and there are multiple instances of the same company name in this column.
(Columns E to I are part of a pivot table and I have various formulas in A thru D).
In column A I have a value indicating whether the company has 'exposure' (an internal meaning for our sales team). If the company has exposure, then the word exposure is indicated otherwise the cell is blank.
What I need to do is in Sheet 2, create a table that extracts a unique list of company names from column C only where it has the word 'Exposure' next to it in column A.
I would like this to be dynamic so if I change a value in the pivot table in sheet 1 the values in the table in sheet 2 will update accordingly.
I am figuring this is an index and match or perhaps a countifs.
View 9 Replies
View Related
Mar 18, 2014
I need to count the unique items in a range that don't contain the string "option". I would like not to use VBA for that but I can't make it work with a simple formula.
For now, I have :
[Code] ......
That doesn't count the cell with the content "option" and count correctly the other unique items. However I need to ignore any cell that contains the string "option" (with wildcards).
View 8 Replies
View Related
Aug 21, 2013
I have an issues with a formulae I have written to measure two factors;
A; How many different countries appear within a certain date range. B; What countries are they.
I tried a unique list, but could not get it to work within a range? I dont particuarly care how the data is pulled through as long as I do it. At the moment I have become stuck in 'Unique Ranges' and have n given up?
The formulae issue is in the tab "Problem_Formulae", the dat in the sheet 1, and the date ranges in sheet 2. Also, just to make life a bit more challenging pivot tables are a no go .
View 6 Replies
View Related
Jul 9, 2014
I have a file with a column containing a series of records where a reference number can be repeated several times. I want to create a formula that will count the number of unique reference numbers in the column.
However - and this is the tricky part - I need it to allow for when the report is filtered, i.e. something like a SUBTOTAL function which ignores the hidden values.
So, the column in the full report has 691 unique values across 2,200+ records. If I apply a filter the column only has say 78 unique values. Is there a formula that can calculate this?
View 12 Replies
View Related
Nov 6, 2013
I have been using this function to count the number of unique text values in a data set:
=SUM(IF(FREQUENCY(MATCH(B2:B10,B2:B10,0),MATCH(B2:B10,B2:B10,0))>0,1))
It works great if I want to count number of unique text values overall. However, I want to count the occurrences of unique text values if they meet specific criteria. (Like a countifs function would if it could count unique text).
View 7 Replies
View Related
Apr 25, 2013
I have a spreadsheet with some calculations and the part i am interested in is data in R4 : V58
In this R4:R58, S4:S58 and T4:T58 have some rows that have False because of IF calculations that put False in some rows of R and hence in S and Hence in T.
For example, R15="FALSE" so will S15 and T15 be. Col U is based on whether the corresponding row in R is False or a number. If a Rown in R is false, the row in U= 0 else the row in U is the same as in the same row of a different column - Col I
Col R, T and U are numbers. Col S is text
For example:"
R S T U
False False False 0
False False False 0
False False False 0
55 DEF 3 15
46 XYZ 2 67
False False False 0
False False False 0
23 GEF 4 43
I want a table in another worksheet that will sort through this using a formula and print
Col1 Col2 Col3 Col4
55 DEF 3 15
46 XYZ 2 67
23 GEF 4 43
If I can define things like where the table will be placed in the new worksheet etc, that will be a bonus..But It appears I cannot understand how to do this at all..
View 3 Replies
View Related
Jun 4, 2013
I have a worksheet. I would like to count unique number of "Trans" in column A only if value of cells in column B "Type" equals "Return". In example below, I would want to see the value "3" as total.
Trans Type
1 Return
2 Return
2 Return
3 Exch
4 Exch
5 Return
5 Return
View 9 Replies
View Related
Jun 26, 2013
I use the following formula to count unique values within a group for a pivot:
=IF(SUMPRODUCT(($CO$2:$CO55681=CO55681)*($E$2:$E55681=E55681))>1,0,1)
When I paste values over the formula it takes around 1 hours to do the 70k cells which is excessive. I want to know if there is a way to speed it up?
I tried doing an =cell and then paste special that and it works really fast but when I delete the actual formula's again the whole sheet locks up.
View 9 Replies
View Related
Mar 28, 2014
Is it possible to have a formula that generate a Unique list (List 1 and List 2) of Missing values in List 2 by comparing two lists? Something like this
List 1 List 2 Missing in List 2
1 1 3
3 4 6
5 5
6 6
View 3 Replies
View Related
Aug 24, 2009
If I have multiple entries with different but repeatable text values in one column - how do I count all unique ones ? Is there a function or does it have to be a pivot table of sth ?
View 14 Replies
View Related
May 14, 2012
I am trying to find a formula that will count the number of unique entries there. I have tried the solutions posted on various websites to no avail (most recently:
Code:
=SUM(IF(FREQUENCY(MATCH(A1:A10,A1:A10,0),MATCH(A1:A10,A1:A10,0))>0,1))
).
The answer should be 4,457.
Ticket Number
T20110819.0527
T20110830.0339
T20110901.0060
T20110901.0060
T20110907.0042
T20110907.0042
T20110908.0186
T20110908.0186
T20110908.0186
T20110908.0186
[code].....
View 1 Replies
View Related
Apr 24, 2014
see the attached spreadsheet including the data. In Column AA I have created a formula that looks at Column B, and pulls each unique value from that column. add to this formula, or propose a new one, that pulls unique values into column AA if at least one of the rows has an "Actual Finalization Date" in column D that is in 2014?
View 1 Replies
View Related
Mar 2, 2014
I need a Macro (not formula) which compares the comma separated values present in Column "I" with individual values present in Column "D" and generate the count of unique values in Column "J".
The sample sheet has been attached for reference.
View 3 Replies
View Related
Sep 15, 2013
I have some data with recurring key values and differing values in the second column, I need to produce a unique list of key values with the second values concatenated together.(See below)
The data can be 10 rows to 5000 and I can have anything from 5 to 150 sheets (Separate data sets), a macro would go a long way to keeping me sane.
Sample data Required Output
A | B Z
1| 10 | a 10,a,b,c
2| 10 | b 11,a
3| 10 | c 12,a,b
4| 11 | a
5| 12 | a
6| 12 | b
My system is Windows 8 Excel 2010.
View 7 Replies
View Related
Mar 14, 2014
I'm running into an issue trying to calculate unique values in a Data column based on a few variables in other columns.
My current formula in Summary tab D4:D19 is
{=SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$H$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))
+
SUM(IF(FREQUENCY(IF(Data!$I$3:$I$66<$E$1,IF(Data!$A$3:$A$66=$I$1,
IF(Data!$C$3:$C$66=A4,ROW(Data!$I$3:$I$66)))),ROW(Data!$I$3:$I$66)),1))}
This is currently counting the number of times a date value (data column I) appears for that name (A4:A19) in the data when meeting all of the conditions. I need it to instead count the number of times a unique date appears for that name with the additional conditions met (which all appear to work fine).
The results in the pink highlighted cells (Summary column D) should be:
Names starting with A - 3
All others - 2
I've left some other columns in the data with X's so that I can easily convert this back to my working spreadsheet.
View 2 Replies
View Related
Apr 17, 2009
I have 12 columns of data. In those 12 columns of data I have 3 digit numeric IDs. I want to count the unique number of IDs for each row. I have about 14K rows.
What would be the best way to do so?
Some rules about how the data is stored. I have 12 columns of data with anywhere from 1 to 12 columns having data for each respondent. Data always fills left to right and never skips columns.
I have attached an example file that represents how the data is stored and the output I would like (Unique Count).
View 7 Replies
View Related
Jan 31, 2014
how to get this with formula:
Column A - - Column B
a - - - - - - - a
a - - - - - - - b
b - - - - - - - c
c
c
View 8 Replies
View Related
Sep 13, 2006
I have an array that I'm using - and it works perfectly: =SUM(If((FREQUENCY(If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""),If(LEN(B10:B100)>0,MATCH(B10:B100,B10:B100,0),""))>0),1))
Now, what I would like to do, is see how many of these unique numbers relate to another number in column D
See attachment.
View 4 Replies
View Related
Mar 4, 2011
I have number values in G2:G50 with some blanks included - what I'm looking for is a formula that will add all the values together but will only add values that exist more than once one time.
4.24
2832.74
2832.74
8643.73
8643.73
The only things that should get added at 4.24, 2832.74 and 8643.73
View 9 Replies
View Related
Dec 4, 2012
I have an ever growing client list that currently has just over 2500 names which I need to track the total number of clients, which is the easy part, the total number of files, and the most important part is how many unique names are on the list. Some clients will appear a number of times on different dates, and I need to be able to track how many clients appear only once in the list.
Adams, John
10/6
Lincoln , Abraham
10/6
Clinton, Bill
10/6
[code].....
In the above example, the answer I am looking for is 2, because Clinton, Bill and Carter, Jimmy both appear only once. My total clients would be 4, though the number number of "files" worked on would be 6.
View 3 Replies
View Related
Feb 6, 2007
I have some data and one of the columns is overtime. The data is set up where each employee has a record for each function they perform. So I may have an employee that opens and funds loans. They will have 2 records and one of the fields in the record is overtime. My issue is, in this example, that the OT will be doubled if I just sum the column. I need to sum the unique values only.
View 9 Replies
View Related
Dec 13, 2006
I have a spreadsheet into which users enter account details. I have another spreadsheet which is updated periodically which contains a valid list of accounts.
Currently I am using the following code which works perfectly to see if the account is valid or not:
If WorksheetFunction. CountIf(coaRange, checkAccount) = 0 Then
where coaRange is the search range on the valid accounts spreadsheet and checkAccount is the string of the current account to check. If I get 0 I know the account isn't valid and I highlight the incorrect cell. All this is in a loop checking each account. What I would now like to improve is the speed at which the checks are peformed. Sometimes there may be 700 rows with account details in but there might only be 10 different accounts.
View 2 Replies
View Related
Mar 31, 2014
I have one column of data. there are currently ~10k rows, but this will increase over time. each row has either a single value (example: pepsi) or a comma separated value (google,samsung) with up to 6 commas. instead of the rows looking like this:
pepsi
google,samsung
coca-cola
I want them to look like this in one column (preferably via a formula):
pepsi
google
samsung
coca-cola
I would like the above output to be a unique, alphabetized list.
View 8 Replies
View Related
Jul 24, 2014
I'm working with a data set (attached) that tracks financials at both the job and item level (in my customer's data - a unique job can be made up of a single or multiple items).
I've successfully built a formula (in column C of the attached) that counts the total number of items and their associated $ values that were invoiced in a given month based on my customer's requested item-type categorizations (i.e. "Exact Match", "Similar", "Inferred", "Cost-Plus").
The problem I'm running into is building a formula that counts the first unique instance of the Job ID associated with those items. For example - in cell C33 on the attached - The total number of items invoiced in June that were "Exact Match" was 10. These items were spread across 9 unique jobs - and that's where I'm struggling - to build a formula that only counts the first unique instance of the corresponding Job ID in Column C.
The formula I'm having trouble with is located in Cell D12 on the "Dashboard" tab of the attached.
The formula as I have it is returning a result of 8 - because it's summing the "1"'s in Column I on my "Invoice Data" tab - however it should read 9 (Filter Column Q on the "Invoice Data" tab to "June", Filter Column AQ on the "Invoice Data" tab to "Exact Match", and then sum the unique job IDs in Column C).
Excel_Forum_Example_Dataset_7.24.14.xlsx
View 1 Replies
View Related
Dec 23, 2013
I am writing a formula to accomplish the goal of counting only unique text values in a column, based upon two different factors:
*Need to Count unique text values in column named 'CASE_NAME'
*Column 'FISCAL' must match cell A5
*Column 'ZONE' must match cell A3
View 5 Replies
View Related
