Sum Formula Returning ZERO In One Cell Working Everywhere Else
Apr 19, 2013
All the answers I can find for this address either the auto-calculation setting or formatting the cell as a number. I am using this same formula in a bunch of cells to calculate totals: =SUM(E12:E17). It works find all over the sheet, except in one box. There is no difference in formatting or data type or anything.
Not working: notworkingexcel.png
Working: workexcel.png
The numbers being summed from the cells above the one in question are referenced from another sheet if that is relevant.
I am wondering if there is a way to return a cell reference by having excel look at a table with certain parameters. For instance... If there were a table with repeated dates such as: Feb 12 1500 1530 Feb 12 1745 1750 Feb 13 1215 1245 Feb 13 1610 1700 Feb 13 1850 1900 Feb 14 1050 1140 Is there a way to return the cell number (ie A6) for the first instance of Feb 14?
I would like to have the answer to a formula, say in cell G6, to show up in say G5. I notice in my college coarses, doing our homework through excel, the solutions are always in a cell around the entry cell.
The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.
I am trying to find a formula for a vlookup that will check one cell for any value but if that cell has no entry then it will check a different cell to return the value how do i do this?
TEAMCSS Wetherill ParkCT NAME
above is where i need it to look CSS wetherill Park is cell C1 the cell that has no entry is H1, both of these cells have validation lists in them,
I'm trying to use a formula for column F, starting in cell F6, for column M, starting from M26. The formula works in Column F but after I tried to use it in column M with adjustments, it doesnt work. Attached is the file.
the autosum is not working on one cell which has a formula. All the other cells with formulas are summing correctly. The forumla i used is: =IF(C21="No","-1","") If i enter "No" in C21 the value -1 is return.
However the autosum does not seem to pick up this -1 and only returns 0.
I am using the worksheet change routine for conditional formating of more than three items.
The problem is that it only changes if I manually type within the page and does not update if the cells are updated via formulas.
To explain a little more, I have three sheets that I combine into one to help find the best rate from three companies using the following formula:
=IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" All",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4),FIXED(PMI!C4,2)&" PMI/UG",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" PMI/GE",IF(AND(MIN(PMI!C4,UG!C4,UG!C4)=GE!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(UG!C4,2)&" GE/UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,FIXED(PMI!C4,2)&" PMI",IF(MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,FIXED(UG!C4,2)&" UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=GE!C4,FIXED(GE!C4,2)&" GE","ERROR"))))))) Please feel free to condense this if you like.
So when I update a reference on one of the first three sheets, the cells update on this sheet but the cell colors never change. This is the code for the worksheet change
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cel1 As Range Dim Rng1 As Range
On Error Resume Next Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1) On Error GoTo 0
I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.
It works I1 is blank and it works when F7:K7 has data and I1 is initialed. However, when I1 is initaled and there is no data in F7:K7 the cell reads "N/A". It should read "Approved with insufficient data".
=IF(ISBLANK($I$1),"",IF(ISBLANK(F7&G7&H7&I7&J7&K7),"Approved with insufficient data",LOOKUP(99999999999,F7:K7)))
I am using this formula. How can I get it to pull 'Sales Materials'!$F17:$F69' and display along with 'Sales Materials'!$B$17:$B$69 when my logical statement is true.
=INDEX('Sales Materials'!$B$17:$F$69,SMALL(IF('Sales Materials'!$E$17:$E$69="YES",ROW('Sales Materials'!$B$17:$B$69)-16),ROW(A1)),1) I've tried using * but I think something is going on with "-16" which I was told to you use to account for headers.
the formulas in sheet 2 of the attached file, the formula from rows 27 is returning nothing, and I think I’m not getting the formula right. It may need a little correction.
I am trying to average a data set where some rows at the moment are blank but will update at a later date, I am getting a div/0 error, the formula I am trying to use is
=IF(C23:C30="","",AVERAGE(C23:C30))
I thought this would look at the data and see if its blank leave it blank but if there are numbers there it would give me an average.
=VLOOKUP(G3,'Calculation for September 07'!C7:E1975,2,FALSE)
The formula is returning #N/A, but I see the lookup value in the table array. What do I need to add to the formula to have the lookup value recognized?
1) Not using a macro and combining relevant w/s functions, is there an intelligent way to return the value of: SUM(n=n1 to n=n2) of (-1)^(n-1)*(n)^(n-2)/(n-1)!*X^n to a cell containing the formula ??
2)Example: n1 in cell A5:: 1 (integer variable) n2 in cell A6:: 32 (integer variable) X value in cell A7::1.00 Returned sum in cell A8:: 0.567143 ...
I am using the OFFSET formula (=OFFSET($A$1,0,0,$B$1,1) and instructions (http://www.ozgrid.com/Excel/DynamicRanges.htm) I found on this site (which is great, by the way).
In the instructions on the site, it requires you to define a range for which the formula to apply. What I tried to do was skip naming the range, and simply using the OFFSET in various cells throughout the file. However, whenever I enter in a row [height] of greater than 1, the formula returns a #Value error. I want to use this offset on multiple data ranges, so naming all of them would be rather time consuming. Is there any way to skip this step?
I am trying to determine if I can write a formula that will read text in one cell, such as insurance and if true enter the amount from another cell and if false then 0. I have tried a IF statement by add the text to name manager. However, the answer is 0 rather than the amount in the selected cell. I might need to use a different formula or function.
I have two tabs (In-Transit) & (AC) column A in both sheet have a "Concatenate" that i copied and pasted and values only and also switch the format to "Text" on both tabs. I do a vlookup
[Code] ......
and it returns the results i want....But then i was thinking due to the volume of data what if the value in column A is found twice on tab "AC".. i wouldn't know with a "Vlookup".
So trying to build a Index/Match formula [Code] ....
I also returns some good results, but i also get some back as #REF. I also get #NA and both of the formulas and those are valid no matches...
The first two columns are an example of my data set; I would like a formula for the 3rd column (Length+1) which will give me the length at the next age (i.e the value in the cell below in most cases) unless the following age is 1 in which case I want it to return zero.
I know I can do this as I have already succeeded once but since moving a few things on my spread sheet the formula has gone wrong and I can't correct it.
I have one sheet with many different lines on and another I would like to select certain rows with the same reference number in column A. Below is the formula I am using
