I am trying to write formula in a cell using vba code, but i m not getting the expected one.
[Code]......
In the above code, i m trying to insert the formula where it fetches the address of a cell using some variables.
Here r = 1, c = 1 and resOffSet = 7
From the above code im expecting cell adress like A1 , B1 etc but i am seeing "0" in the cell value.
I have this formula
=IF('Senate 1'!K10="",'Senate 1'!K$8,IF(S10>'Senate 1'!K10,S10,""))
what am hoping i can get it to perform is have S10 replace it self each time a greater value is inserted in Cell S10.
I have a formula in Sheet1 column H that I need to appear in the cells when the button is clicked (the button inserts a new row).
View 1 Replies View RelatedHere attached is my sample workbook:
Attachment 310920
My button inserts a new row into the table.
What I want is that everytime a new blank row is created, the formula in the Days in Situ column is there as well (but obviously the cells update depending with which ever row it's in.. eg below formula is row 10.).
I have some columns with formulas in it. at the end of the column (used range) i have a row with total values of individual columns. However, Whenver, I insert a new line, then the formula of that particular column is not applied to the new rows inserted. does any one know why? If it is not set automatically, How do i enable it do be done?
View 9 Replies View RelatedIn my "example" I have references in Summary!D23:E32 which take data from Input!B36:U36. Is it possible to automatically update these formulae if a row is inserted eg above my row 37? The formula in D23 should then change from =OFFSET(B37,-1,0) to =OFFSET(B38,-1,0) and so on. I would like this to occur wherever I insert a row.
I am using this code, but it inserts rows consecutively from the top only.
Sub InsertVolRow()
Dim iRow As Long, iColumn As Long
On Error Goto Exit_Error
iRow = Application.WorksheetFunction.Match(" Total", Range("A:A"), 0)
Rows(iRow).Select
Selection.Insert Shift:=xlDown
iColumn = Application.WorksheetFunction.Match("Total", Range("2:2"), 0)
Cells(iRow - 1, 1).Select
Selection.AutoFill Destination:=Range(Cells(iRow - 1, 1), Cells(iRow, 1)),
I've applied a basic multiplication formula =D12*E12 in a table Column F, also I've filled it throughout but now if new rows are inserted in between or at the end of the table, new cells in this columns doesn't include this formula.
View 1 Replies View RelatedI'm trying to wrap my head around this. I have in a formula in one sheet pointing to a cell in another. Once I insert a row the formula adjusts. I need them to remain static.
I have tried searching, however I'm not 100% on the terminology.I have tried the F4 shortcut and put the $ signs in, however they still change.
I'm trying to use a formula for column F, starting in cell F6, for column M, starting from M26. The formula works in Column F but after I tried to use it in column M with adjustments, it doesnt work. Attached is the file.
View 3 Replies View Relatedthe autosum is not working on one cell which has a formula. All the other cells with formulas are summing correctly. The forumla i used is: =IF(C21="No","-1","") If i enter "No" in C21 the value -1 is return.
However the autosum does not seem to pick up this -1 and only returns 0.
All the answers I can find for this address either the auto-calculation setting or formatting the cell as a number. I am using this same formula in a bunch of cells to calculate totals: =SUM(E12:E17). It works find all over the sheet, except in one box. There is no difference in formatting or data type or anything.
Not working: notworkingexcel.png
Working: workexcel.png
The numbers being summed from the cells above the one in question are referenced from another sheet if that is relevant.
Formula to cell with macro not working
I'm trying to enter this formula into cell in VBA macro.
I send these kind of mails to intimate people about upcoming meeting, the format I prepare in Excel 2013 and paste it in Outlook 2013 (as a table, not as an image)
Now one of the columns I put as 'Days Remaining' which basically tells the users how many days are there to the review, the image below will show how it looks:
Now the numbers of days remaining will be correct the day I send the mail, but when somebody opens the mail at a later date, it would not sort of show the true number.
Is there a way to auto-update this number inside the Outlook mail, as it works in an Excel Sheet?
I am using the worksheet change routine for conditional formating of more than three items.
The problem is that it only changes if I manually type within the page and does not update if the cells are updated via formulas.
To explain a little more, I have three sheets that I combine into one to help find the best rate from three companies using the following formula:
=IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" All",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=UG!C4),FIXED(PMI!C4,2)&" PMI/UG",IF(AND(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(PMI!C4,2)&" PMI/GE",IF(AND(MIN(PMI!C4,UG!C4,UG!C4)=GE!C4,MIN(PMI!C4,UG!C4,GE!C4)=GE!C4),FIXED(UG!C4,2)&" GE/UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=PMI!C4,FIXED(PMI!C4,2)&" PMI",IF(MIN(PMI!C4,UG!C4,GE!C4)=UG!C4,FIXED(UG!C4,2)&" UG",IF(MIN(PMI!C4,UG!C4,GE!C4)=GE!C4,FIXED(GE!C4,2)&" GE","ERROR")))))))
Please feel free to condense this if you like.
So when I update a reference on one of the first three sheets, the cells update on this sheet but the cell colors never change. This is the code for the worksheet change
Private Sub Worksheet_Change(ByVal Target As Range)
Dim Cel1 As Range
Dim Rng1 As Range
On Error Resume Next
Set Rng1 = ActiveSheet.Cells.SpecialCells(xlCellTypeFormulas, 1)
On Error GoTo 0
[URL]
I got the code in the above link working for me, but how would I restrict it to a certain subset of Rows? It's overwriting headers and totals and other things I don't want to change in the worksheet.
I'm trying to write a macro similar to the one found here: here:http://www.techonthenet.com/excel/macros/checkbox.php.
Rather then use a textbox, I would like the cell to display the date when text is inserted in the cell to the left.
ie. I insert text (the letter 'a') in cell E11, and the date appears in cell F11.
I would also like the macro to do this for a range of cells ie. for E11 to F21, then from G11 to H21, then from I11 to J21, all the way to column IV.
I wanted the title to be " Dynamic Row And Column Index In Macro" but I wasn't allowed to write it so. However, I have macros where I write things like:
.Cells(138, 13).Value = Something
Now, if I add rows and/or columns in the worksheet, (138, 13) might not be the coorect coordinates anymore.
Basic run down of spreedsheet. 2 diffrent sheets formated like a calendar. sheet one is to track minutes tardy for employees at work. Work sheet 2 is to document any weather or other issue that might arive to cause and employee to be tardy.
I have condintional formating set up to change the cells a diffrent color (on sheet 1) if the same day is flagged on sheet 2 as a exceptionalable day. What i want -
When i flag a day as a weather issue or other exceptionalable issue on sheet 2 i place a inserted comment with an explantion. I want this comment to auto transfer to the corrisponding cell in sheet 1 when i place it on sheet 2. I'm not sure if this is possible with Excel 03 but thought i'd ask.
I am trying to create a filterable To-Do List. My goal is to enter each item with a userform, which I have created and pops up upon clicking the "Insert" textbox. making the following macros happen:
1) I would like to insert the new item in a row at top of existing info, below the headers, with the populated information from the userform when you click the "Add" Commandbutton on the Userform.
2) I want to make sure any filtering is reset whenever a new item is entered so the list reverts to original appearance.
Attached File : To Do List.xlsm
I'm trying to create a dynamic chart title by inserting a text box in the chart title that displays the value of the last populated cell in column A. The number of rows increases over time, so I'm trying to come up with a dynamic cell reference. When I hover over the text box a tool tip appears with this text "TextBox 2" so I assume that is the name of the text box. I'm definitely open to other methods that do not use vba. It seems that none of this code can activate the text box:
Code:
Sub textbox()
Worksheets("Figure3-5").TextBoxes("TextBox 2").Range("A" & Rows.Count).End(xlUp).Value
End Sub
[Code]....
Need automate a process that I would like to implement into my spreadsheet,
It involves inserting comments,
I want to be able to select a particular cell anywhere in my spreadsheet, and then click on a command button and have a comment automatically inserted into the active cell, I tried to record the macro by hand but I do not know how to state that it is the active cell the comment should be added to
I have a spreadsheet that gets updated from the top. Is there any way for me to mod my formulae so that they always begin with the topmost cell (row 2 in this case, and in many columns) but still extend downward?
More practical example:
I have an Average formula in column X which (at the moment) averages X2:X75. I would like, even when adding new rows at the top (in the row 2 position) the forumla to not need to be manually extended with every new entry. So, if I add three more entrie4s, it will then average X2:X78. I tried all manner of absolutes.
I am trying to apply icon conditional formatting in a cell. The cell contains the following formula: =VLOOKUP(D20,'owssvr(1)'!O:W,9,FALSE The formula results in a "2", "1", "0" or "-1" in the cell. The icon conditional formatting is not working at all (no icon appears). I have the conditional formatting setup as numbers Green 2, Yellow 1,0 etc based on value. If I delete the formula and just type in any of those numbers directly, it works. I have changed my cells to "number" and it still does not work.
View 3 Replies View RelatedI have a program that automatically exports info into excel as that info becomes available. What I need is to be able to insert into a cell the exact time that the information was inserted into excel. For example, cell A1 gets info inserted into it, I need cell B1 to automatically insert the time that the info was inserted into A1. Any time there is new info inserted into A1, B1 needs to update that corresponding time.
View 2 Replies View RelatedOur spreadsheet pulls values from a column when a month is inserted in a certain cell:
OCT is typed in B2 and in the column below it, from B10 down to B286, data (numbers) are pulled from the October column K10 through K286 using =IF($B$2="Oct",K10,IF(and so on for each month). IF Nov is typed in B2 then the same happens except data is pulled from the November column, L. The monthly columns from K through V are tied to and updated
from other sheets. As you can see the problem is that nested functions allow only 7 and I need 12, one for each month. I have looked at the VLOOPUP and the HLOOKUP but our data is not set up that way (tables) since they need to be exact numbers pulled from the monthly columns that are tied to other sheets.
OCT (B2)
OCT NOV DEC
Complaint 3 (B10) 3
6
Inspection 10 (B11)
10 2
NOV 11 (etc)
11 5
Door Notice 1 and
so on
Recheck 32
Citation 2
Work Order0
Demolition 0
I have a problem with the code below. The code pastes values into column c, depending on values in Column A.
The problem is that, at the end I want it to go to column d and execute the R1C1 formula, but the lastrow1 variable is always set to 1 ( I went through the code pressing F8) so the formula won't go down the column.
Code:
If Range("A" & i).Value = 2 Then
Worksheets("deacc").Activate
Call SelectRndRow
Worksheets("sheet1").Activate
Range("c1").Select
Selection.End(xlDown).Select
[code]....
why my datedif function is not working.
View 3 Replies View RelatedI currently have a workbook (Unconfirmed Application Audit 02) which is the result of an audit of applications on PCs. I have come up with a macro which will insert new columns into the sheet and fill those columns with data, should the application listed, have a replacement specified in the AppRM file. The macro works fine for column G, in that it pulls through the new software manufacturer name but column H should pull through the new product name and I should display the new product version and they don't. To me, it looks like the exact same formula in each column apart from the column reference to get the information from.
View 7 Replies View RelatedI have a Age calculating formula in an excell cell, which calculates the age as on another date.
The forumala is =IF(E4="","",IF($C$1="","",ROUNDDOWN(($C$1-E4)/365,0))) where E4 is the date of birth and C1 is the date in which I want the age calculated to be.
The above formula works very well on my computer, but does not on any other computer. If I access it from my sent items or from a shared drive, it works perfectly on mine, but not on any other computer!!! I get a #value error message on all other computers.
I have tried the foll:
If i enter =ISNUMBER(C1) where the age has to be calculated, I get #Name?
If I enter =ISNUMBER(E4), i get TRUE
The above is on the sheet where it does not work ( on others computer ) and i get TRUE for both on mine. Also both have the same date formats and same time zones...
where the issue with the following formula is?
=IF(AND($E$2="N",$AA$550),"BT1",IF(AND(Z5="F",Y5>=0),"CLEAR",IF($AA$5