Module To Find & Move Based On Cell Adjacent's Set Value
Jul 27, 2007
ABCDE
FGHIJK
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
writing a Macro which will move data from a cell to an adjacent cell.
E.g Column B has only data in certain cells, I would like the Macro to work down the column and every time it encounters data in Column B to move it into the adjacent cell into Column A.
I need to create a repeatable macro/module to help me prepare a spreadsheet for import into Microsoft Access. In each row of the spreadsheet is various information including Order Number, Model, and Serial Number. The problem lies in the Serial Number column, which often contains several Serial Numbers delimited by commas. In order to serve my needs in Access, each Serial Number instance needs to become a new row ( record) wherein all of the information (except for the Serial Number) is the same. It is crucially important that all of the serial numbers are in the same column. (I tried using text to columns as a starting-off point, but seemed to dead end).
I am really stumped at this particular point in my coding. What I am trying to do is to have a user input an ID number. When they click OK, I want to find the ID number and then subtract 1 from a number that is 13 columns over. So if the ID number is "123456789" and that matches the value in A3, I want to subtract 1 from the amount in M3 (leaving the new value in cell M3). So, if M3 was 30, now it would be 29.
I am trying to calculate an adjacent cell to place an interger value after a find result. The following example, lets say location=$L$5, I need to calculate Cells(13,5).Value =n. Its for a page number and the cell I need is always to the right of the found cell.
Until now if I needed to find a cell's data (and its adjacent data) I've been using code in the format of (for the purpose of this example, you can assume all data in coulmn 1 is unique. Functioning as aprimary key using incremeting integers):
I am having a problem using data from my combobox to find the cell on the worksheet and write to the adjacent cell.
Worksheet name is Fleet ComboBox Name is ComboBox7 TextBox name is TextBox3 CommandButton1
I would like to be able to take the text from ComboBox7, find this text in Col A of worksheet Fleet and write the Value of TextBox3 in the adjacent cell in Col B. when the CommandButton1 is pressed.
2. Find a matching value in column A (starting in row 2), error message if the is not a match.
3. Copy the adjacent cell column B (rows vary) to the clip board. It would copy until it found the first blank row.
I have attached a scaled down version of the spreadsheet, the one I use has 100's of codes. I know some VBA but not much. I searched the forum but could not find anything.
I have found many posts similar to what I am trying to accomplish, but nothing that I have been able to modify and make work. I need a VBA script that will find a cell with the text data "Difference" and copy the adjacent (to the right) cell's data. I then need to find a cell with text data "Ops" and paste the previous data to it's adjacent cell.
I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.
I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.
I want the user to be able to choose from the list or type the drug name in.
I have one sheet in my workbook called 'mapping' which has a list of codes on it, the length of which will vary on a periodic basis.
I have another fairly large sheet on the workbook called 'data' (around 2000 rows) that will also vary in size. I want to do a search on the data tab for each code that is contained on column 4 of the mapping tab and if the code is found, enters the corresponding value from column 1 of the mapping tab to the cell 6 columns to the left of where the code was found on the data tab (cols H and B in this case).
The issue I have is the codes maybe contained more than once on the data tab so I need the find/replace command to search the whole of the data tab and perform the task each time.
I am using a macro to find a value in a cell and if found, replace the value in the cell to the left. Thr macro works fine - unless the value I am searching for does not exist. The answer is ( Ithink) an IF statement, but I am having problems with the errors, when I try the IF.
The macro below blows up at the ActiveCell.Offset(0, -1) = "109073X line with an error "Run-time error "1004" - Application-defines or object-defined error.
I've tried a number of things I've seen from this board but have not found a way past the error.
If the value is found, the macro moves to the else statment and stops at the ActiveCell statement with the above error. If the value is not found, then the macro goto NotFound.
Sub Macro2() ' 'Range("A1").Select 'Start from the home cell Dim ValueFound As Object Set ValueFound = Cells.Find(What:="Cirrus Reversals/CREDITS") If ValueFound Is Nothing ThenGoTo NotFoundElseActiveCell.Offset(0, -1) = "109073X"'ActiveCell.FormulaR1C1 = "109073X"End If NotFound: End Sub
I have a spreadsheet with a column A of dates April 08, May 08, June 08 etc. Adjacent to each of these dates is a value in column B. I want to select the appropriate value relevent to the current date and use it elsewhere. Therefore if it happens to be Oct 08 when I open the spreadsheet I want the value in column B, adjacent to Oct 08 to be represented.
I have a main workbook that is meant to summarize data from other workbooks
In Row 6 from column H on I have workbook names in each cell
Column G in all workbooks (including the main one) contains our branch #'s for our offices
For each workbook listed in row 6 , I need to open that workbook (I have that setup with the code below---notice there is an AX.xls that is appended to the file names listed in row 6 in order for the names to match what is in the windows directory)
In the newly opened workbook, I need to, for each value in column G, copy the value from adjacent cell in column H (the dollar value) then search column G of the main workbook for a matching branch and paste the value to the appropriate row under the workbook name column (remember workbook names are in row 6)
The trouble is, for each branch in column G in the newly opened workbook that cannot be found in the main workbook, I need to paste the new branch # at the bottom row of/in column G and the $ value (H column value from the newly opened workbook) to the corresponding row under the workbook name column
Sub OpenWBs()
Dim Rng As Range Dim WB As Workbook Dim MyPath As String Dim lastCol As Integer Dim newRange As Range
I have a listbox that has row and columns. The rows are combinations of options and the columns are Additives.
After selecting a row in Listbox1, (first column are names) i would like the value of the second column to goto a specific area.... find that value and in the cell to the right of it place a "Y". The "Y" would indicate that "yes" it was part of the selection row of the listbox. Same for third column, forth, fifth and sixth. The result from the listbox is a number of Y's and N's in the result page. Then making all that were not part of selected line and equal to "N" to hide row (height = to zero).
Listbox and expected result are in attached example worksheet.
The attached does show the need much better then I can explain it.
how to make the data look like a table with three columns. Other than the date, it is space delimited. I have a tracking spreadsheet where Column A is populated with dates for the year. Column C contains daily values.
I don't always start entering daily values on the first day of the year, e.g., this year the first value in Column C corresponds to March 9. All values in Column C are contiguous - there are no blank cells until the value in Column A is greater than today's date code. I would like to use a formula (rather than VBA) to look down Column C and find the first non-blank entry where the value in Column A is less than or equal to today(). In this case, the formula should return the value for March 9, 2008.
CREATE TABLES LIKE BELOW?Column A Column B Column C
March 1, 2008Saturday March 2, 2008Sunday March 3, 2008Monday March 4, 2008Tuesday March 5, 2008Wednesday ...................
how to cut a string from text and copy it to another cell: Example of a TEXT:..........................
This is Text in one cell - I need to cut the BOLD part. It always ( if appears ) is after statement <b>Kod Producenta</b>: and before <br/> It's not always in the same place. but always between statment above. "<b>Kod Producenta</b>: STRING_THAT_NEED_TO_BE_COPIED_TO_DIFFERENT_CELL <br/>" how can i do it with VBA macro? with cpp would be so much easier but still i need to do this in VBA...
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
i am trying to find a cell in column C (if cell =140) and copy that cell and the adjacent cell in column "D" to worksheets called" upload" then repeat through multiple tabs- repeating process and dumping values in columns on the "upoload" worksheet
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then ActiveCell.Offset(-1, 2).Value = Date End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
How would I make cells in column A to C be highlighted yellow, of which is 0.02 in value be higher than in compared with the adjacent cell in column D ? It is easy to use condition format function to setup the conditions in 1 row. The problem is there are thousands rows in the sheet(of which represents an individual file by each row), and need to have the conditioning format applied on each row independently. How can it be done w/o the need to have format painter applied line by line, of which is a very time consuming.
I have been reading through trying to find a similar post but the nearest i could find was one dealing with numbers rather than text. This is how the workbook looks. Column A contains a list of numbers based on vehicle types. Column B contains a list of vehicle names.
A B 1 Car, 1 Taxi, 2 Bus, 2 Lorry, 3 Skateboard, 3 Bike, 1 Motorcycle,
What I am looking for is the best way to combine the text from column B depending on the value of column a. the finished results would then end up as: "Car,Taxi,Motorcycle,", or "Bus,Lorry," etc. This is just a simple list.. The one I am working with has around 2500 entries. I have been trying to do this using the CONCATENATE function and IF statement but it's just not working..... My head is ready to explode
Set cell fill color based on number of adjacent cell
I am doing a research with the following information. In column B, I have the name of the buyer company, column B cells that contain numbers 1, 2 or 3 opposite the company name in column B depending on certain characteristics. I would like to mark the companies in column A in different colors (or some other recognizable way) as described below.
columns result col A col B col C 7 Materials Inc 3 7 Materials Inc 2 6 Rayon Inc 3 6 Rayon Inc 3 6 Rayon Inc 3 8 Commun Corp 1 8 Commun Corp 2 8 Commun Corp 3 8 Commun Corp 2 8 Commun Corp 1
I would like to have on output in column A as shown above according to the following criteria:
4: if there are only 1 in column C opposite the specific company in column B
5: if there are only 2 in column C opposite the specific company in column B
6: if there are only 3 in column C opposite the specific company in column B
7: if there are 1, 2 and 3 in column C opposite the specific company in column B
8: if there are 1 and 2 in column C opposite the specific company in column B
Any suitable function in excel or Macros that can work with the formatting, because I have tens of thousands of companies and it will take too much time to do it manually.
