Calculation Value Based On Month Name In Adjacent Cell
Feb 28, 2008
I have a spreadsheet spread over with dates in column A from September to December and I have a fuel rebate column as well. The fuel rebate is different for each month and is calculated as a certain amount of cents per dollar added to the total amount in Column B
September: 26c
October: 13.5c
November: 43c
December: 66c
e.g. If there is an invoice for 10/9/07 (september) for $100, then the fuel rebate would be $100*.26 which equals $26 fuel rebate. I want to calculate column B (this is the column with the dollar amount in it), but I want the calculation to be different depending on what date is in column A, so if in column A the dated month is October, then the calculation would be something like B2*0.135. give me the calculation I am certain you don't need VBA for this right (just nested IF statements?)
View 3 Replies
ADVERTISEMENT
Jul 25, 2012
I'd like to sum a range of cells if the date in the adjacent cell is last month, so... A2:A1000 holds the dates and B2:B1000 holds the values, i'm trying to figure out how to sum all of the values for the previous month (i.e. June).
View 7 Replies
View Related
Feb 18, 2009
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies
View Related
Dec 17, 2007
I tried all those search and have no idea what to look for, sorry.
I have attached a single sheet with Footpath Budget for you to see.
In J6, we put in Y or N for Yes or No if there's a nature strip along the footpath.
Now, in cell G49 gives us the total square meters of nature strip.
What I want to do is if I put N in cell J6, cell G49 should be empty or zero because N means there's no nature strip. But if I put Y in J6, then cell G49 can give us total squares from cell C43.
So what formulas can I put in cell G49?
View 3 Replies
View Related
Nov 10, 2012
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies
View Related
Feb 20, 2014
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
View 4 Replies
View Related
Oct 19, 2007
I am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then
ActiveCell.Offset(-1, 2).Value = Date
End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
View 2 Replies
View Related
Mar 22, 2006
I am writing a formula to calculate the last and next month end e.g. if I
enter 28-02-06, the expected result will be liked 31-01-06 and 31-03-06.
28-02-06 will be stored in cell A1, and my expected result will be displayed
in A2 & A3.
My formular is liked " =A1-31 , = A1+31. But because of "31"
has to change each month, therefore if doesn't work to my calcaulation.
Also, from the above example, the calculation for March is correct "31-03-06"
but the January is worng, it comes date on 28-01-06. But I need both result
at the end of the month.
View 12 Replies
View Related
May 2, 2009
I am trying to get the sumproduct of a column of amounts based on the adjacent cells ID code.
For example column B will have codes 1FHD, 2FHS, 3FHG etc. these codes will be mixed otherwise I would have just did a sum of the cells.
Column C would have dollar amounts.
Sumproduct based on adjacent cell ID Code
View 6 Replies
View Related
Aug 19, 2013
How would I make cells in column A to C be highlighted yellow, of which is 0.02 in value be higher than in compared with the adjacent cell in column D ? It is easy to use condition format function to setup the conditions in 1 row. The problem is there are thousands rows in the sheet(of which represents an individual file by each row), and need to have the conditioning format applied on each row independently. How can it be done w/o the need to have format painter applied line by line, of which is a very time consuming.
View 6 Replies
View Related
Jan 11, 2009
I have been reading through trying to find a similar post but the nearest i could find was one dealing with numbers rather than text. This is how the workbook looks.
Column A contains a list of numbers based on vehicle types. Column B contains a list of vehicle names.
A B
1 Car,
1 Taxi,
2 Bus,
2 Lorry,
3 Skateboard,
3 Bike,
1 Motorcycle,
What I am looking for is the best way to combine the text from column B depending on the value of column a. the finished results would then end up as: "Car,Taxi,Motorcycle,", or "Bus,Lorry," etc. This is just a simple list.. The one I am working with has around 2500 entries. I have been trying to do this using the CONCATENATE function and IF statement but it's just not working..... My head is ready to explode
View 2 Replies
View Related
Oct 5, 2011
Set cell fill color based on number of adjacent cell
I am doing a research with the following information. In column B, I have the name of the buyer company, column B cells that contain numbers 1, 2 or 3 opposite the company name in column B depending on certain characteristics. I would like to mark the companies in column A in different colors (or some other recognizable way) as described below.
columns result
col A col B col C
7 Materials Inc 3
7 Materials Inc 2
6 Rayon Inc 3
6 Rayon Inc 3
6 Rayon Inc 3
8 Commun Corp 1
8 Commun Corp 2
8 Commun Corp 3
8 Commun Corp 2
8 Commun Corp 1
I would like to have on output in column A as shown above according to the following criteria:
4: if there are only 1 in column C opposite the specific company in column B
5: if there are only 2 in column C opposite the specific company in column B
6: if there are only 3 in column C opposite the specific company in column B
7: if there are 1, 2 and 3 in column C opposite the specific company in column B
8: if there are 1 and 2 in column C opposite the specific company in column B
Any suitable function in excel or Macros that can work with the formatting, because I have tens of thousands of companies and it will take too much time to do it manually.
View 1 Replies
View Related
Mar 4, 2012
I want the font of a value in a cell to turn green or red based on the value of the cell below it - NOT based on a set value or range like all of the other examples are based on. I want to apply a formula or condition to the entire table.
Column a has the date for each value, newest date is row 1 and oldest date is row 250. Column b-k has the number value for each animal species we are tracking. If there are more animals than the day before, the value went up and I want the font to be green. If there are less animals than the day before, then value went down and I want the font to be green.
There are about 250 rows in each table and I have 4 tables. I thought I could do conditional formating but I can only find how to change font color based on a set value. For instance, for each day there are over 10 turkeys, then it would be green. That is NOT what I want, see below:
Mon 5 no color change
Fri 5 color change to green
Thu 4 color change to red
Wed 5 color change to red
Tue 7 color change to green
Mon 5
date looks more like this - col a is date, col b is turkey, col c deer, etc
Mon 5 4 3 4 2
Fri 5 3 4 2 7
Wed 5 2 7 1 0
Tue 7 4 6 5 9
Mon 5 1 1 5 4
I would think this is similar to daily stock prices, if data goes up then it is in green, but if the price goes down then in red. Not based on purchase price (set value), but based on previous days closing price. For this report, I only care about the change day to day.
View 6 Replies
View Related
Aug 26, 2013
Is there a way to shade a cell based on whether the adjacent cell is shaded? I found some ways to do this with VBA but I was looking for a non VBA solution if possible. So basically if cell C5 is highlighted yellow I would want cell D5 highlighted yellow too, regardless of the values inside the cell. Is this possible without VBA?
View 6 Replies
View Related
Apr 25, 2008
The easiest way for me to explain it is to give an example: if the list contains Red,Blue,Green,Yellow. i need a formula for the adjacent cell that inputs £1 if red is chosen, £2 if blue is chosen, £3 if green is chosen, £4 if yellow is chosen
View 2 Replies
View Related
Jan 20, 2006
There's got to be a way to do this (mail merge style perhaps...) I would like to insert the entry/ies under a heading in a table in one worksheet whenever that heading matches the data entered in a separate worksheet.
Presently I can find no way to do this in Excel.
View 12 Replies
View Related
Jan 23, 2008
I'm trying to create an if statement to check to see if a cell has a value in it and return a math function. My problem is that some of the values contain more that just the name searched for. This is a basic example
A B C
10 Williams DXT if(B1="Williams",A1*.8,if(B1="Johnson",A1*.85,1))
20 Williams DPX if(B2="Williams",A2*.8,if(B1="Johnson",A2*.85,1))
30 Johnson AMV if(B3="Williams",A3*.8,if(B1="Johnson",A3*.85,1))
40 Johnson ACS if(B4="Williams",A4*.8,if(B1="Johnson",A4*.85,1))
50 Smith TWN if(B5="Williams",A5*.8,if(B1="Johnson",A5*.85,1))
View 4 Replies
View Related
Jan 15, 2010
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
View 9 Replies
View Related
Feb 16, 2014
A2:A5 contains different dollar amounts, a6 is the sum of those amounts
In column B (B2:B5), i place a "p" beside the amount in column A once it has been paid.
I want to:
a. conditionally format the amounts in column a to turn green once I put the 'p' in the adjacent column
b. conditionally format the sum in A6 to exclude amounts that have been paid, and only display the total amount of the unpaid lines.
View 2 Replies
View Related
Mar 6, 2014
I want AB1 to highlight red if date in S1 is not blank and N1 doesnt equal AA1. Is this possible?
View 1 Replies
View Related
Jan 15, 2010
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
View 6 Replies
View Related
Mar 14, 2013
I have the following formula in cell H2:
=AND(EXACT(G2,UPPER(G2)),(LEFT(G2)>="A")*(LEFT(G2)<="Z")*(MID(G2,2,1)>="0")*(MID(G2,2,1)<="9")
*(MID(G2,3,1)>="A")*(MID(G2,3,1)<="Z")*(MID(G2,4,1)>="0")*(MID(G2,4,1)<="9")*(MID(G2,5,1)>="A")
*(MID(G2,5,1)<="Z")*(MID(G2,6,1)>="0")*(MID(G2,6,1)<="9")*(LEN(G2)=6))
I would like to prohibit data entry in G2 if H2 reads "false" and allow data entry in G2 if H2 reads "true" .
View 2 Replies
View Related
Mar 28, 2014
i am looking macro formula to delete row with 2 criteria :
- delete rows if yellow color background and based on adjacent cell (blank cell), otherwise keep rows when adjacent cell not blank
View 8 Replies
View Related
Jul 27, 2007
ABCDE
FGHIJK
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
ABCDEG
F HIJK
View 10 Replies
View Related
May 14, 2008
I have three hidden columns (Text only) one column with Parts, then Description, then Cost. I have a pull down menu (i.e. Cell 3, A) listing all of the choices in the hidden Parts column. I want to automatically populate Cell 3, B with the corresponding Description when a Part is chosen from the pull down menu, and the same in another column for the Cost.
I am using Excel X for Mac, in OS 10.5.2
View 4 Replies
View Related
May 14, 2012
I am trying to make a formula to calculate a month over month value, simply subtracting Feb from March to see what the difference is. That's easy. However when I do that i'm using something like =SUM(B2-C2) but when I insert the next month, I have to manually format each calculation to the new month. See example at bottom.
Is there an easy way to tell excel to always look at the most left cell to calculate from?
Jan Feb Mar Month over month
100 125 150 +25
View 3 Replies
View Related
May 24, 2013
I have a large workbook with 2 rows of data I want to format (R25:R530, M25:M530). Row M is already populated, row R is new data that I am entering. When the value of a cell in row R is larger than its adjacent cell (R25:M25) in row M, I would like the font to turn red. When the value is smaller, I would like the font to turn green.
With the amount of time I've spent attempting to conditionally format, I could have gone through and formatted each cell individually by now!
View 8 Replies
View Related
Mar 31, 2014
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies
View Related
Jan 31, 2014
I would like to know a way to sum the future months dollars only once the month has passed to consider that amount only in my forecast. For eg. If I have a Vendor A contract from Jan - April for $1000/per month in total for $4000. My Forecast should only be Feb-April = $3000. So my total column should only display $3000. Once Feb has passed , the forecast should only be March-April i.e $2000. How to get rolling month sum of forecast once month has passed.
Attached is a sample spreadsheet with different vendors.
Rolling sum after month has passed.xlsx‎
View 5 Replies
View Related
Dec 21, 2012
I have a cell A1 in sheet2 linked cell A1 in sheet1 (simply A1='sheet1'!A1). A1 in sheet1 is a data validation drop down menu.
I want to clear the content of A2 in sheet 2 everytime the content of A1 in sheet2 changes/is updated. That is everytime the value of A1 in sheet1 is changed using the drop down menu.
I tried using a Worksheet_Change event macro (which I do not fully understand) but it won't work with a cell that updates from a calculation. It also doesn't work if triggered from a cell from another worksheet (I tried linking it to cell A1 on sheet1 in this case).
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("A1")) Is Nothing Then Exit Sub
If Target.Count > 1 Then Exit Sub
Range("A2").ClearContents
End Sub
Any simple solution to clear the content of cell A2 in sheet2 when A1 in sheet2 updates?
View 3 Replies
View Related
