Conditionally Format Entire Row Based On Adjacent Cell Values
May 24, 2013
I have a large workbook with 2 rows of data I want to format (R25:R530, M25:M530). Row M is already populated, row R is new data that I am entering. When the value of a cell in row R is larger than its adjacent cell (R25:M25) in row M, I would like the font to turn red. When the value is smaller, I would like the font to turn green.
With the amount of time I've spent attempting to conditionally format, I could have gone through and formatted each cell individually by now!
View 8 Replies
ADVERTISEMENT
Feb 22, 2012
I have two data tables (12 columns each, 60 rows each) in the same worksheet. Ideally, I'd like to conditionally format the 1st table to show if any values changed from the 2nd table.
I see that I can conditionally format each cell to compare to its respective cell in the 2nd table, but would rather not do this 720 times.
View 2 Replies
View Related
Apr 29, 2009
i've been trying for teh last two days to figuire out a way to conditionally format the first cell in a row to turn a certain color based on the values of several independant cells in that row, as opposed to monitoring the whole row. I have tried numerous IF, AND, OR, formulas to no avail. The cell obviously also needs to ignore blank cells...Can this be done?
Basically I want the first cell to turn yellow if dates in certain cells are within 90 days of today, and turn red if within 30 days of today.......
View 9 Replies
View Related
Jun 11, 2014
I have spent too many hours Googling and trial with mostly error in attempting this. I formatted the very first cell A1 for today's date =TODAY(); this is also dirrectly above the column with all the dates in it. I just want an entire row's contents to turn red if it is 15 days old or older. This =$A1<TODAY()-15 somewhat works, but it only turns the date cell red, not the whole row. It also makes blank cells turns red, which I would like to remain blank (another formula is needed I imagine).
View 3 Replies
View Related
Feb 28, 2014
What I am trying to do is create a multi-currency expense report. For example, cell B1 has a drop down list of three different currencies. Based on the currency selected in B1, I want C1 to reflect that number formatting using the proper currency.
Im sure there is an easy way to do this but I have tried using an if statement in the conditional formatting section but it does not work.
how to total the different currencies using the ifsum formula, so this is more of a presentation task, but still it has annoyed me to no end.
In the example workbook, the currency value selected in row E should effect the currency formatting in Rows F-L
View 1 Replies
View Related
Dec 1, 2009
Format the number in Column AL to '[hh]:mm' when Column C's value is ="P/T", otherwise format to 'General'
Column C's value is referenced from another sheet in the same workbook via a VLOOKUP function.
Column AL's value is based on an IF formula which goes like this:
=IF($C4="F/T",SUM($AJ4)+($AK4/2),SUM($D4:$AH4))
Basically the above formula asks if Column C's value is F/T then count (because if F/T then the corresponding values in that row are whole numbers). If not, then SUM (because if P/T the corresponding values in that row are set to [hh]:mm format).
I have another sheet in the same workbook which has code (quoted below) which does something similar but I don't understand it enough to get it doing what I want for the sheet in question.
View 6 Replies
View Related
Mar 25, 2013
Below is my code which isn't formatting the cells it's suppossed to. It looks like it isn't doing anything. I think the issue might be with the highlighted section of my code, but when I go to "Manage" my rules for conditional formatting, excel references the appropriate cell under the "Applies to" section. I am using relative cell references for for the majority of the rest of the code and this section follows a section that selects the correct cell for this conditional format.
Code:
Selection.FormatConditions.Add Type:=xlExpression, Formula1:="=""ABS()>.005"""
Selection.FormatConditions(Selection.FormatConditions.Count).SetFirstPriority[code].....
View 1 Replies
View Related
Nov 24, 2013
let's say cell A1 is colored blue manually, how can i format cell b1 to be colored red? is it possible in conditional formatting?
View 7 Replies
View Related
Sep 12, 2006
way to conditionaly colour code all cells in a grid based on cells in other grid: i.e.
gridA
1 1 2
1 2 1
2 2 1
grid B
12 11 14
34 16 53
35 64 23
i want all cell in grid B to be red if the coresponding cell of GridA is 2.
so here "14" "16" "35" and "64" will be red!
View 9 Replies
View Related
Aug 19, 2013
How would I make cells in column A to C be highlighted yellow, of which is 0.02 in value be higher than in compared with the adjacent cell in column D ? It is easy to use condition format function to setup the conditions in 1 row. The problem is there are thousands rows in the sheet(of which represents an individual file by each row), and need to have the conditioning format applied on each row independently. How can it be done w/o the need to have format painter applied line by line, of which is a very time consuming.
View 6 Replies
View Related
Mar 13, 2013
I want to highlight an entire row based on the contents of of a particular cell. For instance, if c4 contains data, highlight the entire row 4. If c5 is blank, do not highlight the entire row 5...and on and on...
View 2 Replies
View Related
Nov 22, 2013
I need to make an entire column formatless if the cell in row 3 contains no text. I want the whole column to just appear like a normal formatless column, but if there is text in the row 3 cell, I want it to be the way I have it formatted right now.
View 1 Replies
View Related
Feb 18, 2009
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies
View Related
May 22, 2014
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
View 4 Replies
View Related
Dec 6, 2013
I'm trying to conditionally format rows of data based on duplicates in the first column, then filter the results. I have a table of data with mutiple variables assigned to different "headings" that looks a little something like this:
A
B
C
D
[Code]....
[selects the table, then GoTo Special selects the blanks, fills in the blanks with the cell above, then Copy and Pastes As Values the entire table again to fill everything in]
I’m stuck on how to input a formula into the conditional formatting window that will:
Format the text to white in columns A, B, and E based on there being a duplicate above that row in Column A only. i.e. conditionally format the values with a * below:
A
B
C
D
E
[Code]....
If I use the conditional formula I found: =A1=A2, then cell E3 gets made white text when I don’t want it to, hence the “referencing column A” part of the question (Column A is always a unique ID number whereas Column E can have a duplicate in the row above). [Edit: Why can't I type Enter or put a line break here... I'll try re-edit at home...] When I go to filter on Column C for YYY again, the conditional formatting needs to realise to un-white the text, which is my next headache because it means conditional formatting that acts relative to hidden rows as a result of a filter... Oh and did I mention the client wants this done in 2003? This is an afterthought though – as I can force them to use 2010 if need be
View 6 Replies
View Related
Jun 5, 2014
I request you to write a code for me to fill the cell values as "Not Applicable" in Column "AZ", if the "B" Column cell values = "Justified", "Approved LSAR" & "Approved SDAR".
I have attached the work book of what I am trying to accomplish.
View 14 Replies
View Related
Nov 10, 2012
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies
View Related
Feb 20, 2014
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
View 4 Replies
View Related
Jul 11, 2013
Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
View 9 Replies
View Related
Nov 14, 2009
I wish to compare 2 sets of data in 2 cells and in the third cell i wish to both display the difference and format in a colour depending on the outcome of the difference. Is this possible? or is there another solution?
e.g cell A1 is 21
cell B1 is 26
cell C1 is the difference and if the difference is greater than say 2 then it would colour red if equal to 1 then yellow and if less than 1 as in 0 -1 etc it would colour green. I have been very successfully using conditional formatting to colour a cell that has the data inputted but cant now do it for the formula cell. The context is pupil progress but that i guess is irrelevant really.
View 4 Replies
View Related
May 25, 2011
I have a spread sheet and I want to conditionally format rows to be a certain color. That part I'm fine with. But I don't want them to be a set color. I have a "key" of different colored cells that I want to be the fill colors of the formatting. The ultimate goal is that for example the key looked like this
red
blue
yellow
green
then the rows I had would be formatted as red, blue, yellow, and green. But if you were to go into the key and change the first cell from red to purple, then the rows would become formatted as purple, blue, yellow, and green. Obviously I can copy formating by hand using the format painter, but I want it to update automatically.
View 4 Replies
View Related
Oct 18, 2013
Picture1.jpg
How do I create a CF if a cell is blank (in my case represent no sales) i want to have it yellow (ex. C2)
But if it has two consecutive blank cell i want to CF with Red. (Ex. F3)
But i also need to exclude blank cells when we we have no previos sales of that item (Ex.B3).
View 3 Replies
View Related
Jan 10, 2012
Is it possible to conditionally a set of cells based on a different cell? Example; Background color of cells A2:A10 = blue if A1>0
View 1 Replies
View Related
Sep 29, 2006
I'd like to hide rows based on the value of a specific cell (that specific cell will always be C14, and it will have up to 8 variables selectable from a drop down list).
For example, if C14 = Innovative/exploratory, i'd like to hide rows 15-45. If C14 = Technical Service, i'd like to hide rows 15-32, and 42-44. I'm not familiar with VB, but am a quick study -
View 4 Replies
View Related
Feb 6, 2008
I'm trying to figure out how to lock a range of cells (all in a row) when some puts a specific character in one of the cells. I have a sheet where I want people to enter data. Once they put a 'C' in the last column to indicate that the entry is complete, the whole row should be locked so they can't change any of the cells for that entry. There are some good pointers already on the forum to help me get the basics:
Conditional Cell Lock Unlock
http://www.ozgrid.com/forum/showthread.php?t=66397
http://www.ozgrid.com/forum/showthread.php?t=76379
However, all of these point to specific cells rather than a range of cells that can be located close to the target of the change.
View 3 Replies
View Related
Oct 24, 2013
I would like to format the color of cell A1 on Sheet 1 based on true or false values from cell range A1:A10 on sheet 2. For instance:
1. If all cells on sheet 2 in range A1:A10 were false then cell A1 on sheet 1 would be red.
2. If some cells on sheet 2 in the range A1:A10 were false and some were true then cell A1 on sheet 1 would be yellow.
3. If all cells on sheet 2 in range A1:A10 were true then cell A1 on sheet 1 would be green.
View 5 Replies
View Related
Jun 30, 2009
Using 2007, I need to conditionally format a cell colour based on 5 other cell colours that have been conditionally formatted. The 5 other cells will be coloured either red or greem. What I want to do is have an overall status cell that would be show green if all of the other 5 cells were green, amber if 4 of the other cells were green and one was red and red if 3 or more cells are red.
View 4 Replies
View Related
Jun 5, 2013
I'm quite new to VBA, but I am attempting to get a Forms ComboBox to appear or disappear based on whether a certain cell (P7) reads YES or NO. P7 in turn updates in turn based on a user-selected value. As of now, the ComboBox only appears or disppears if I go back in and out of the formula I entered into P7. Basically, I want my ComboBox to dynamically update based on the value in P7. That may sound a little muddled, so here is my code for the ComboBox:
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("P7")) Is Nothing Then
If UCase(Target) = "YES" Then
Me.Shapes.Range("Drop Down 30").Visible = msoTrue
Else
Me.Shapes.Range("Drop Down 30").Visible = msoFalse
End If
End If
End Sub
View 3 Replies
View Related
Apr 24, 2008
I am writing a macro that will format my table automatically. My table will start with 3 columns all containing data on a 1 to 1 relationship (I.e. there are no empty cells until the end of the file). Initially these are columns "A", "B", and "C" but they shift to columns "B", "C", and "D" during execution of this macro. However, my macro formats the table with seven addtional column headings which will eventually contain data though I need to format them prior to populating them. I know my column range is always going to be ("A:J") but my row range will vary on a weekly basis. That being the case, I need to know how to format the cells in these empty columns up to the number of rows containing data in the existing populated columns. For exapmle I would like the macro to format the table in the following way:
1. Insert new column "A" preserving the data in the existing column "A" shifting it to cloumn "B" and set Cell "A1"'s value = "#" --> I have already coded this portion.
2. Set Cell "A2"'s value = 1 --> I have already coded this portion.
3. Set Cells ("A1:J1")'s values = to desried column header title modifying the three pre-existing column headers while aligning the data to center --> I have already coded this portion.
4. Set all column headers to bold 10pt font and shade the headers row ("A1:J1")--> I have already coded this portion.
5. Set pre defined column widths for columns "A:J". --> I have already coded this portion.............
View 4 Replies
View Related
Jun 3, 2014
I have a matrix in excel to show % and $ for multiple columns - set up like this:
Rows Part 1 Part 2 Part 3
Criteria 1 % $ % $ % $
Criteria 2
Criteria 3
the $ columns are conditionally formatted to highlight the top 10 values on the matrix. is there a way to have the corresponding % cells also highlighted? The % and $ aren't both top 10, so the % would have to be highlighted based on the $ top 10 cells.
View 6 Replies
View Related
