Swapping Characters Within A Cell?
Apr 15, 2014I have SKU numbers in a cell and need to change the location of the sizing digits. Here is the example:
AOP6000SSUMD
AOPSS6000UMD
I have SKU numbers in a cell and need to change the location of the sizing digits. Here is the example:
AOP6000SSUMD
AOPSS6000UMD
I have SKU numbers in a cell and need to change the location of the sizing digits.
Here is the example:
AOP6000SSUMD
AOPSS6000UMD
I am replacing characters within a cell.
In trying to better this project i am working on, and getting great help from this forum, I have a new question. Is it possible to swap data in a cell on the fly either through a button, check box or radial?
What I have is a "bid" area on a work book that is supplied info based on the user choice. So what happens is the user goes to a part page, picks and item, and then clicks a button to add the item to a bid sheet. From there the corresponding cells are auto filled via VLOOKUP. The item that is transferred is the part number; also this is what I would like to “swap” on the fly. The part numbers have generic descriptor (which I already have stored on another sheet along with the rest of the data that is auto filled via VLOOKUP) but because the user is transferring that data for VLOOKUP to work I am not sure it can be done.
I have an worksheet with 10 following columns, the columns may be in whatever order.
Object Attached ToObject Type Date Last ModifiedDescriptionFile IDSizeTypeIs File InUniversal Resource IdentifierVersion Identifier
I am looking for optimal algorithm to swap between columns. I need to get the order like in a list.
in 1 workbook i have 2 sheets (sheet1 and sheet2) with same format of data that I need to compare and compile in sheet3 by a primary key column.
example:
sheet 1 & 2 data format:
|Atr1|Key|Atr2|SubAtr1_1|SubKey1|SubAtr1_2|SubAtr2_1|SubKey2|SubAtr2_2|Atr3|
..................... ......................................../......................................../
......................................Set1.....................................Set2
To be more specific I can compare this with an electrical wiring table, where:
Key is the wire number
Atr1, Atr2, Atr3 are general atributes of the wire number
Set1 are the atributes of the first end of the wire, called "from":
SubKey1 is the "from" device and its subatributes SubAtr1_1 & SubAtr1_2
Similar for the other end of the wire is Set2.
This means that Set1 and Set 2 have similar format & type of data.
I have found on your site an example of macro that is doing the comparision between the 2 sheets of data but I encountered a problem...sometimes on sheet2 Set1 and Set2 are reversed and are highlighted as a difference but I don't want this.
Please help me with macro that would create a rearranged copy of sheet 2 respecting the following conditions:
1. if Key from sheet1 cannot be found on sheet2 then copy entire row on sheet3.
2. if Key from sheet2 cannot be found on sheet1 then copy entire row on sheet3.
3. If Key from sheet1 = Key from sheet2
If SubKey1 from sheet1 = SubKey2 from sheet2
& SubKey2 from sheet1 = SubKey1 from sheet2
Then reverse Set1 with Set2 by swapping cells
and copy entire row (with Set1 and Set2 reversed)to sheet3.
All data on sheet 3 should be sorted by Key.
So we have people's names in a table. First name in one column and last name in another column. We have a 3rd column where we can use 8 characters to do a combination of First 5 of Last Name + first 3 of first name. However, if someone's last name is only 3 or 4 characters, we'd then want to take more from the first name to fill out the 8 characters.
So:
Charles Johnson -> Johnscha
John Smith -> Smithjoh
Willian Wu -> Wuwillia
What's the best way to do that without creating some crazy formula with tons of if/thens?
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
I'm trying to use conditional formatting to highlight cells in a column that have less than 8 characters.
I know the LAN function, but I don't know how to make it work for the conditional formatting.
Using Excel 2007. I have a limit of 80 characters and spaces in a particular cell and I need to force those characters/spaces over 80 to the next cell. Is that possible?
View 11 Replies View RelatedI have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
When I try to enter 18 numeric characters in a single cell, the last three characters are converted to zeros. I can find no format that would allow me to see all 18 entered characters. Is there a way of doing this?
View 2 Replies View RelatedI have a spreadsheet which I use to enter notes related to particular invoice numbers. A v-lookup pulls the notes into another tab. What I'm running into is that the notes can be quite lengthy - in excess of 1,000 characters. When the notes get too long, they don't all appear in a single cell (unless it's extremely wide).
I'm wondering if there may be a way to maintain my notes in a word doc instead? Maybe in a table that pulls in using a v-lookup? But I'm not able to figure out how to direct a v-lookup to a word doc.
how many characters a cell can contain?
View 3 Replies View RelatedI have a column which contains names e.g
Mr D.H.JONES
Mr Derek Harold JONES
I want last name first,then space,the other names. This is because I am using VLOOKUP and the sheet I am looking up has the names in this format.
As you can see, in D5, I have the charactor chain SRG-DC01-RA-xxxxxxx, and in D6 I have the charactor chain SRG-DC43-RA-xxxxx.
With the formula that I have entered, I would have thought that E5 would have generated "Lawnton". I don't want the formula to pick up the SRG, the RA, or the number, just the DCXX component.
This is what I have now:
=IF(OR(ISNUMBER(SEARCH({"DC43","DC01"},D5))),"Erskine Park","Lawnton")
which has not changed a thing from:
=IF(OR(ISNUMBER(SEARCH({"DC43"},D5))),"Erskine Park")
Surely I am not far off the mark??
Cell E1 having 150 characters (letters), I want to trim first 45 characters in cell E1 and place it in cell B2 and remaining characters in cell E1 (ie. from 46th character till end) and place it in cell A3.
View 1 Replies View RelatedIs it possible to count the number of characters in a cell?
View 1 Replies View RelatedIn one of my columns I need to count the characters (alpha/numeric AND blank spaces) in each cell. (Any that are over 300, I will need to manually reduce to under 300.) How can I do this? Basically I would simply like to know which cells exceed 300 characters.
View 9 Replies View Relatedi have a long text in A1 field and i just need to capture some characters in between. Below is the example.
Raw Data:
Cell A1 (r1,c1) = Target: ABC, CustomerOrder, Results: BDE, LastUpdate: 12Dec08
I want to get the Result as below:
Cell A2 = Target: ABC Cell B2 = Results: BDE
Can this be done in Excel Cell format? Or do i need to do it in MS Access?
I am not sure whether this can be done with a function/formula or with VBA, hence posting this query in general. A neat formula however would be the best solution, coz the number of entries varies, in the workbook attached I have 14 different cases though. I need to know when a cell does not repeat any of the possible 7 letters, in each given cell. If there is repetition then leave the cell blank , if all four of the letters are different then place "NR" in the cell.
See attached wrkbk: Book1.xlsx‎
See the attached file. I regularly receive input files which I have to reformat and upload to a website as a .csv. The website does not like the / between the characters on the Input Data tab. Is there a way to automatically search and remove them and leave the rest of the characters intact? The columns do not always appear in the same order and there could be more or less columns. On the Import Template tab, columns A-I will always be there, so ideally the code should make the changes from the Input Data tab and copy the present columns (J thru whatever) header and data over to the Import Template tab starting in 'J1'. I think that VBA would be the best way to go due to the variable nature of the columns.
View 4 Replies View RelatedI have cells that look like the following
PN„¢HWA„¢PN
HWA„¢PN
PN
HCC
PN„¢HWA
HCC„¢HWA
PN„¢HWA
PN
Not the most exciting data, but I need to identify which cells contain the sub string "HWA". Ideally the next column would have that string extracted into it or some kind of indentifier
We are in the middle of a system conversion and I need to make sure our data is not over the length of the maximum character count for certain fields in the new system. Is there any function in Excel that counts the # of characters in a cell or will highlight the cells that contain larger than a certain # of characters?
View 2 Replies View RelatedI am looking for a function that will count characters[text or numbers] in a cell
View 9 Replies View RelatedI have the following in cell A1:
0113 CDW 3 yr Coterm - Ironport devices
I need to remove 0113 from this cell to read only:
CDW 3 yr Coterm - Ironport devices
Any formula to do this?
I need a VBA code to find the number of characters in each cell and display the result in next column.
For Ex:
ColA:
HI
who
There
output should be
ColA,ColB
HI,2
who,3
there,5
I have shown example for 3 rows only but there are chances like it contains more than 3 rows(Dynamic rows).I tried by creating Range variable but I couldn't succeeded.
Is there a way I can lock a set of cell to only allow 30 characters or less and if so if they copy and paste they can go over 30 characters in a cell. I can not allow they to go over 30 characters.
View 2 Replies View RelatedI have a formula which I have been using for testing up till now. =IF(LEN(Q3)
View 4 Replies View RelatedLet me state first that I do not see the need to put so much in one cell. Aren't there enough cells ?
Secondly, note the difference between DISPLAY and actual CONTENTS (see formulabar) of the cell. Contentslimits: see helpfiles, but displaylimits check out this code. It will explain itself. Experiment with settings within code.
Option Explicit
Sub count_characters_in_cell()
'Erik Van Geit
'061019
Dim cell As Range
Dim nr As Variant
Dim x As Integer
Dim temp As String
Set cell = Sheets(1).Range("A1")
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
I have a worksheet that multiple users will be entering in data, this information is then being used to pull into a form located on a sepearte worksheet within the workbook. One of the cells in the input sheet has the potential to have more characters than excel will allow. It is my understanding the maximum number of characters per cell is 1,024.
What is the best way to setup my spreadsheet in the event the data contains more than 1,024 characters. The informatino going into the cell are legal descriptions of property so I want to be able to keep the description together in the final document in the other worksheet. Is there a way the user can input the entire decription in one cell, regardless of the character size, then have a formula to take the first 1,024 characters and put them in one cell, followed by another formula to put the next 1,024 characters in the next cell?
Then in my main document I would use the concatenate formual to combine these two cells into one.