In one of my columns I need to count the characters (alpha/numeric AND blank spaces) in each cell. (Any that are over 300, I will need to manually reduce to under 300.) How can I do this? Basically I would simply like to know which cells exceed 300 characters.
View 9 RepliesWe are in the middle of a system conversion and I need to make sure our data is not over the length of the maximum character count for certain fields in the new system. Is there any function in Excel that counts the # of characters in a cell or will highlight the cells that contain larger than a certain # of characters?
View 2 Replies View Relatedhow many times a charachter appears in a cell?
View 9 Replies View RelatedThis should be simple, but I am struggling with finding a way to use the search or find function to identify text characters. This is my situation, I have for example a cell that contains FW023 or D1234. I need to be able to count the number of characters that are text.
i would think I would be able to do it with the search or find function, but can't figure out how to get it to just count the number of text characters with in it.
I'm trying to use conditional formatting to highlight cells in a column that have less than 8 characters.
I know the LAN function, but I don't know how to make it work for the conditional formatting.
I have 62,000 lines - and some of the cells contain 4 numbers, and some of the cells contain a sequence with two letters followed by 8 numbers
I want to count how many cells have the sequence of two letters and 8 numbers.
Everything Ive read so far has led me to using the LEN function, but that doesn't seem to be working too well for me.
Example: In D5 if I have AB00011111
Basically =LEN(D5) will tell me there is 10 characters in the cell - How do I get it to count the cells with only 10 characters and post the number of cells with 10 characters in column E1 for me.
I'm making a register and need to count the attendences (marked on the register as 1) and the number of authorised abcenses (marked on the register as AA).
I'm using the SUM function to count the attendences but wondered if they was a formula that would allow me to just count the AAs from the list.
Cells in the range of BG8:BP8 either have a "W" or an "L" in them. I want to have cell BO9 display the total number of Ws and cell BP9 to display the total number of Ls.
View 3 Replies View RelatedI need to be able to paste information into excel and then get excel to read the characters to 50 and then move the other info to another line and do the same command again until it has read all the data and put it in lines of 50.
View 9 Replies View RelatedI have a spreadsheet, a small section attached. There are near 20000 rows at present. I need to count the number of characters in B1 excluding any hyphen in b1. If a hyphen occurs in b on its own,the count is zero.If b cell is blank,i need a count of all characters in A.I need a formula I can autofill down.The count column is c and I have completed it manually to show what I mean.
View 9 Replies View RelatedSo we have people's names in a table. First name in one column and last name in another column. We have a 3rd column where we can use 8 characters to do a combination of First 5 of Last Name + first 3 of first name. However, if someone's last name is only 3 or 4 characters, we'd then want to take more from the first name to fill out the 8 characters.
So:
Charles Johnson -> Johnscha
John Smith -> Smithjoh
Willian Wu -> Wuwillia
What's the best way to do that without creating some crazy formula with tons of if/thens?
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
Using Excel 2007. I have a limit of 80 characters and spaces in a particular cell and I need to force those characters/spaces over 80 to the next cell. Is that possible?
View 11 Replies View RelatedI have an index of 80,000 names from an index. Some names appear in multiple volumes and on multiple pages within a volume. While the name is the same, they are different people. The Roman numeral is the volume and the numeric is the page number.
Example of original data: Joe Shmoe V-225, 310 VIII-22, 86, 110
I have separated the data into separate columns. Now I have:
Col 1 Col 2 Col 3 Col 4 Col 5 Col 6
Joe Shmoe V-225 310 VIII-22 86 110
At this point, I want to combine the Roman numeral in Col 2 with Col 3 and 4 and combine the Roman numeral in Col 4 with Col 5 and 6.
There are way too many records for me to manually enter the Roman numeral where missing.
I cannot get various formulas (Countif, Match, Frequency, Etc) to work properly.
I am trying to arrive at a total number of matches of numbers in cell range B1:G1 with any numbers entered into the cell range of K1:P11 and have the total of matches display in cell H1.
However I do not want to count duplicate numbers from the K1:P11 cells. (if the number 5 in posted in K1:P11 multiple times I only need it reported once in H1)
B1:G1 is the constant and the numbers will not change - K1:P11 cells will be populated by adding numbers until the all the numbers in B1:G1 is completed and match.
Range
B1 C1 D1 E1 F1 G1
2 7 19 45 22 13
H1 Total of matching numbers in cell range K1:P11
When I try to enter 18 numeric characters in a single cell, the last three characters are converted to zeros. I can find no format that would allow me to see all 18 entered characters. Is there a way of doing this?
View 2 Replies View RelatedI have a spreadsheet which I use to enter notes related to particular invoice numbers. A v-lookup pulls the notes into another tab. What I'm running into is that the notes can be quite lengthy - in excess of 1,000 characters. When the notes get too long, they don't all appear in a single cell (unless it's extremely wide).
I'm wondering if there may be a way to maintain my notes in a word doc instead? Maybe in a table that pulls in using a v-lookup? But I'm not able to figure out how to direct a v-lookup to a word doc.
how many characters a cell can contain?
View 3 Replies View RelatedAs you can see, in D5, I have the charactor chain SRG-DC01-RA-xxxxxxx, and in D6 I have the charactor chain SRG-DC43-RA-xxxxx.
With the formula that I have entered, I would have thought that E5 would have generated "Lawnton". I don't want the formula to pick up the SRG, the RA, or the number, just the DCXX component.
This is what I have now:
=IF(OR(ISNUMBER(SEARCH({"DC43","DC01"},D5))),"Erskine Park","Lawnton")
which has not changed a thing from:
=IF(OR(ISNUMBER(SEARCH({"DC43"},D5))),"Erskine Park")
Surely I am not far off the mark??
Cell E1 having 150 characters (letters), I want to trim first 45 characters in cell E1 and place it in cell B2 and remaining characters in cell E1 (ie. from 46th character till end) and place it in cell A3.
View 1 Replies View RelatedI have SKU numbers in a cell and need to change the location of the sizing digits. Here is the example:
AOP6000SSUMD
AOPSS6000UMD
Is it possible to count the number of characters in a cell?
View 1 Replies View Relatedi have a long text in A1 field and i just need to capture some characters in between. Below is the example.
Raw Data:
Cell A1 (r1,c1) = Target: ABC, CustomerOrder, Results: BDE, LastUpdate: 12Dec08
I want to get the Result as below:
Cell A2 = Target: ABC Cell B2 = Results: BDE
Can this be done in Excel Cell format? Or do i need to do it in MS Access?
I am not sure whether this can be done with a function/formula or with VBA, hence posting this query in general. A neat formula however would be the best solution, coz the number of entries varies, in the workbook attached I have 14 different cases though. I need to know when a cell does not repeat any of the possible 7 letters, in each given cell. If there is repetition then leave the cell blank , if all four of the letters are different then place "NR" in the cell.
See attached wrkbk: Book1.xlsx‎
See the attached file. I regularly receive input files which I have to reformat and upload to a website as a .csv. The website does not like the / between the characters on the Input Data tab. Is there a way to automatically search and remove them and leave the rest of the characters intact? The columns do not always appear in the same order and there could be more or less columns. On the Import Template tab, columns A-I will always be there, so ideally the code should make the changes from the Input Data tab and copy the present columns (J thru whatever) header and data over to the Import Template tab starting in 'J1'. I think that VBA would be the best way to go due to the variable nature of the columns.
View 4 Replies View RelatedI have cells that look like the following
PN„¢HWA„¢PN
HWA„¢PN
PN
HCC
PN„¢HWA
HCC„¢HWA
PN„¢HWA
PN
Not the most exciting data, but I need to identify which cells contain the sub string "HWA". Ideally the next column would have that string extracted into it or some kind of indentifier
I am looking for a function that will count characters[text or numbers] in a cell
View 9 Replies View RelatedI have the following in cell A1:
0113 CDW 3 yr Coterm - Ironport devices
I need to remove 0113 from this cell to read only:
CDW 3 yr Coterm - Ironport devices
Any formula to do this?
I need a VBA code to find the number of characters in each cell and display the result in next column.
For Ex:
ColA:
HI
who
There
output should be
ColA,ColB
HI,2
who,3
there,5
I have shown example for 3 rows only but there are chances like it contains more than 3 rows(Dynamic rows).I tried by creating Range variable but I couldn't succeeded.
I have SKU numbers in a cell and need to change the location of the sizing digits.
Here is the example:
AOP6000SSUMD
AOPSS6000UMD
I am replacing characters within a cell.