On one workbook I have "column A" that lists serial #'s, one serial number per cell. What I need is to be able to take all the non blank data from that column and copy it to another workbook with all those serial #'s in 1 cell numerically sorted and separated by commas.
View 1 RepliesI am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI have multiple workbooks ( with unique names) under same folder. Each workbook has "Report-Corn" sheet.
I would like to copy cell "P15" from each (workbook-> report-corn -> P15) and paste to Master.xls workbook -> Sheet 1 one after another which is also located under same folder.
I about 150 different workbooks that I need to copy the cell data from the first sheet to a second workbook
The code is running all the way through to the "Clear values?" pop-up box, BUT nothing is actually being pasted into my second workbook
Sub TransferData()
Dim wkb As Workbook, wks As Worksheet, LastRow As Long
Dim FilePath As String, FileName As String
Dim ws As Worksheet, blnOpened As Boolean
'Change these variables as desired...
FilePath = "C:UsersPipeline2DesktopOveralnd Focal Points" 'change path here
[code]....
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View 2 Replies View Relatedhow to loop through workbooks in a certain directory and copy the rows in sheet1 where column B contains numbers greater than zero, and then pasting them into a new master workbook. The sheets will be named differently each week but will always be in the same directory.
View 4 Replies View RelatedI'm trying to set up an excel that will allow me to gather data from multiple workbooks and get it into one master worksheet. All of the worksheets are formatted the same way (See below)
Employee Last Name
Employee First Name
Employee Position
Employee Series Number
Departing City
Departing State
Attended Pilot Training?
We don't have the data yet so the idea is to paste this information into their perspective worksheets and then have them automatically populate into the master tab.
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
I have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook
Application.ScreenUpdating = False ' turn off the screen updating
Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
[Code]....
I would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.
View 3 Replies View RelatedI have a userform which loads the data into a worksheet named "Data" which is being used as a database for an event scheduler. I also load a calendar from a worksheet named "Month" so I need the information from the userform "UForm01" added to 2 worksheets.
The userform adds a series of textboxes to worksheet "Data" in the first open row. I also need certain textboxes from the Userform to be added to another worksheet to populate the calendar.
See the code below.
[Code] .....
What I am trying to do is when data is changed in a workbook, I would like to be able to have it automatically copy the changes to another workbook.
View 2 Replies View RelatedI have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies View RelatedI am creating a spreadsheet to provide to a group of about 40 people. The spreadsheet allows each member to track the referrals they receive and give. I need to plan on creating updates for the spreadsheet and want to make it so they can easily transfer their data to the most current version in the future. Here is a breakdown of the workbook:
Worksheets:
Members
Lists
Referrals Given
Referrals Received
Totals
Formulas
I need to copy the data that they have input from the following worksheets:
Referrals Given
Referrals Received
Here is a breakdown of the "Referrals Received" worksheet:
A1:V4 - Data that will not change and includes many named cells
A5:Nxxx - Dynamic Named Range where they input their data
O5:Vxxx - Contains formulas
I need to be able to copy
A5:Vxxxxx
from the old workbook to the new
Some side items to note:
There is VBA in the worksheet of
Private Sub Worksheet_Change(ByVal Target As Range)
and included in the code is an Unprotect & Protect code to always keep the sheet protected
I figure whatever works for this sheet will work for all the sheets.
I have 2 workbooks. 1 is where data is entered called wksPB, the other is like a database workbook. The wksPB has data to be feed from column B to F and there is a dropdown.
what im looking to do is, if the combobox value is selected as Decline then it should display a messagebox that reference value in cell B is denied. if combobox value is Agreed then the macro should search the database workbook for the text entered in column b of wksPB and then copy data of C:E of wksPB to H:J of database sheet where that text is found and also the approver name in wksPB C24 to the approver cell of where that text was found. I've reached till finding the text but what I get my head twiting on is how to copy the text from wksPB column B:F to database sheet column H:K. Im attaching the sample workbooks and the code where ive reached till.
[Code] .....
Attached Files
Replacement Records - 2014.xlsx
forum file.xlsm
I have a folder which contains multiple 'Customer' workbooks (example attachment 'Customer_001'). Each workbook has a filename unique to the customer (Customer_001, Customer_002, Customer_117 etc). The workbooks contain a single sheet with customer information and answers to questions. These 'Customer' workbooks are automatically saved into a folder once the customer completes a Userform and clicks 'save'. Potentially, there could be 100's of customers' workbooks saved in the folder, each with their own unique filename.
I also have a 'Master' sheet saved in a different folder (example attachment 'Master'). The 'Master' workbook has multiple sheets named 'Department 1' and 'Department 2'. The purpose of the master sheet is to consolidate all information from the individual customers' workbooks.
Specifically, I would like a command button on the 'Master' workbook to execute the following tasks...
1. Copy the data from range A3:F3 from each of the 'Customer' workbooks held in the folder.
2. Paste the data into the next blank row on the 'Department 1' sheet in the 'Master' workbook.
3. Copy the data from range A7:F7 from each of the 'Customer' workbooks held in the folder.
4. Paste the data into the next blank row on the 'Department 2' sheet in the 'Master' workbook.
5. Save the 'Master' workbook.
6. Delete all 'Customer' workbooks in the folder.
I have 17 workbooks which contain similar data and formatting. The only variance is the number of rows of data in each. I want to write a macro in the Master worksheet that will accomplish the following
1. Create a worksheet name in the master workbook with the same name as the workbook that it's pulling data from.
2. Copy over the column headings from columns A:P to the newly created worksheet on the master workbook
3. Copy over all rows that contain the word "down" under column D titled Operational status
The naming convention for the master workbook will be titled "All Switches". The naming convention for the worksheets containing the data are titled Port_Map_on_tiegcsw01, Port_Map_on_tiegcsw02, Port_Map_on_nypgcsw01. There are other names , but I can reference the code an update accordingly.
I found some searches on the forum for creating a macro to copy data between workbooks, but not quite sure how to write the macro for the three functions.
I am using code to filter my 4 sheets Greater then 0 (zero)
After apply above filter now i need to copy multiple rows and paste on another specific workbook for paste i m using below code:
for 1st sheet with the name ("V2")
for 2nd sheet with the name("LV")
For 3rd sheet with the name ("F2")
and 4th sheet with the name("L2")
If I play above code one by one all is going very well,,,,,,or if use in this way all is going very well
But here is a big problem..........if any sheet have no value greater then 0(zero)....then code paste all data... e.g shssts("LV") .Range("C5:C54").Copy but C5:C54 have no data greater then 0(zero) and it will paste on another sheet c5:c54 and again new sheets data will paste below the c54 while c5:c54 have no data.
So I want if any sheet have no data with range is greater then 0(Zero) then skip the copy paste code or use like SpecialCells(xlCellTypeVisible) .
Basically, i have a common workbook template that is used by multiple users across the business to request a cost for numerous new products.
Within the template, there is a common section at the top, where specific project information is entered. There is also a table beneath where 1 or many products can be entered, with specific information relating to that product in the same row.
All the submitted requests are uploaded via an email attachment, to a particular sharepoint directory.
What i would like to do in the master workbook is the following:-
1. Open in turn every uploaded workbook within the sharepoint directory and copy the following cells into the master workbook, each in it's own row (or next available), with the data in adjacent cells.... 1st cell to enter data is $B6.
Cells to copy from each sheet:
Common info contained within cells:
$DG$2,$N$11,$N$12,$N$19,$N$13,$AO$7,$AO$8,$AO$9,$AO$10,$AO$11,$AO$12,$AO$12,$AO$13,$AO$14,$BO$8,$BO$11,$BO$14
Product specific info: $U37, $AD37, $AH37, $DH37, $C37, $O37
Depending on the number of products requested, we need to repeat (loop?) until it finds the next blank row in the table. I have hidden a blank row in the table, so there will always be one!
All of the common information needs to be included for each product specific entry.
For each file, once the upload has been completed, i would like the file to be moved to another "archive" directory.
I have attached the template for information. The master workbook is still in development so can't share currently.
How can i copy paste a set of data from a workbook to another workbook. for example i will copy cell D10:I10 of workbook1 to cell B2:F2 of workbook2.
I have a workbook ("CaTr") Sheet1 has data ranging ("B2:I41").
There are about 30 cells values (scattered) which needs to be copied in a workbook "CA_Log" in one single next available row .
As soon as the CaTr.sheet1 is filled I want the operator to click a button to trigger this event. Then the sheet1 in workbook CaTr should be saved as "G3" cell value.
What I am trying to do is let a user open 2 different excel files and then copy the values from one of the files into the other. The problem I'm running into is that some of the cells aren't in any kind of order that allows for a range, or at least to my understanding of how a range works in VBA. So from the first sheet I need to take the values of [N53, M53, P53, AC53] pasted into [D26, D27, D28, D29]. I'm thinking that maybe this is something that could be done with an array, but I'm still much of a beginner in programming so I haven't gotten it to work.
View 1 Replies View RelatedI have 2 workbooks where I need to copy information across automatically.
I need to copy certain cells from the Issue Record Template to the next available row in Investigations Spreadsheet.
I need to copy
A5 -> B
B5 -> C
D5 -> D
E5 -> E
F5 -> G
G5 -> H
B11 -> O
F11 -> J
I was thinking that the action that could run the macro would be entering a yes or no into F11. The files are kept in the same folder on the shared drive.
I use Excel2003
I have a filtered worksheet -WB1 (filtered by Column "B"). I want to count the number of cells or rows in column "B"(Only the filtered ones) of WB1. Copy out that exact number of cells from another workbook(WB2) from the bottom moving up(Column "A") and paste it into WB1 column "I".
WB1 - Count Filtered Cell/Row with reference to Column "B"
WB2 - copy Cell count bottom to top of Column "A"
WB1 - Paste into Column "I"
I have a workbook 'logsheet' were i enter data like 'coil, supplier, thickness, width' and 'lot'. This happens 7 times on one logsheet. When the logsheet is filled, a new copy is created (from a hidden empty logsheet).
I want this data to copied to a seperate sheet - eg called data - in same workbook so that it can be used in other workbooks as external data.
I want to enter a formula on the logsheet worksheets and not on the data logsheet because the amount of logsheets (and coils) is unkown and can vary each lot.
Is this possible with formulas eg copyto? (if that formula exists ><)
Is it possible to add data from worksheets that still have to be created from the empty logsheet
I have a VBA-coded macro in an Excel workbook that is to open another existing workbook -- a .xls file, not .csv -- copy data from it, paste that into the original workbook where the macro resides, then close the source workbook.
If I use the debugger to step through the macro -- putting a breakpoint at its first executable line, run the macro, then F8 step through it, it works fine. (With delays at the open, close statements.) Free running, it doesn't. I suspect it's a timing issue, that the macro runs full tilt even though the new workbook isn't yet open -- but I don't know how to remedy that.
Here is the situation and the simplified code (the actual macro does a lot more, of course):
Main workbook: Two sheets, "Parameters" that has the fully-qualified filename for the desired source .xls in A1; and "Data", into which I want to paste data from that source.
Source workbook: Single sheet, "Sheet1"
Macro code. For simplicity, it is trying to copy/paste all of the source worksheet's content:
Sub Go()
'
' Go Macro
' Test of getting data from another spreadsheet
'
' Keyboard Shortcut: Ctrl+Shift+G
'
Dim SourceFile As String
Dim HomeBook As String
Dim OtherBook As String
Sheets("Parameters").Select
SourceFile = Range("A1").Value
HomeBook = ActiveWorkbook.Name
right after the open, hoping that might cause a dwell for the open to complete.
When I step through it, the Locals view has all the parameters, getting set properly. If I try to simply run it, it stalls at the opened source workbook, the Locals view is empty, no data has been transferred into the initiating workbook.
If I place the breakpoint after the open, it is not reached. (I have the VBA open.) Hitting F8 then yields a VB error window, "Compile Error" "Expected: To"
Would it be more efficient to do this while both workbooks are open or to code it in such way that the code opens the workbook, copies the range, selects the first workbook, copies the range and then closes the second workbook?
The way I have it setup now is something like this..It requires some interaction from the user. I was hoping to have EVERYTHING work behind the scenes, but if it will be faster to do it this way then I will keep it that way.
Set MyBook = ActiveWorkbook
MySource = Application. GetOpenFilename
Set wbSource = Workbooks.Open(Filename:=MySource)
Set rngJ18Cpy = Range(Range("B4", Range("I" & Rows.Count).End(xlUp)))
rngJ18Cpy.Copy Destination:=don 't know yet
I have two separate workbooks, one is used to create job estimates, and the other is like a running list of the estimates ( Tracking Sheet) that have been entered and completed. What I need to do is send select data from the estimates workbook and enter it on the last line of the Tracking Sheet workbook in a certain order.
Sub copy_to_another_workbook()
Dim smallrng As Range
Dim destrange As Range
Dim destWB As Workbook
Dim Lr As Long
Application. ScreenUpdating = False
If bIsBookOpen("P&WM Estimate Tracking Sheet.xls") Then
Set destWB = Workbooks("P&WM Estimate Tracking Sheet.xls")
Else.............
I use an excel time sheet for my employees and I am wanting to use a command button to copy data in a cell from worksheet1 to worksheet2. The cell that will be copied from worksheet1 will always be "S14". I want to copy that data to another worksheet and have it paste the data in the correct cell. The code needs to find the employees name in worksheet2 and paste the data in the next blank cell. Currently the command button I have works perfectly but I have to use the specific range, I would rather have the code seek out the employees name on worksheet2 so that I don't have to worry about specific row/column ranges. Is it possible? I'm sure it is. I have attached what worksheet2 looks like.
Rather than having to use .Range("A4:AA4") I would prefer to have the code find the employees name.
Attached file: Book1.xlsx
I have two workbooks open. I need to "Save As" and close workbook 2 with a file name from a cell in Workbook 1. The macro is running from workbook 1.
I'm guessing a change in the last line. I don't know what Dim means either.
Dim FName As String
Dim FPath As String
FPath = "G:"
FName = Sheets("sheet 1").Range("A1").Text
ThisWorkbook.SaveAs Filename:=FPath & "" & FName