I would like to use a command button to copy a row of data from one workbook to a column in another workbook. The row of data will have different values on a daily basis but will always be B2 through BE2. I would like the copied row of data pasted in the next available column to the left in the other work book.
View 3 RepliesI've been using the following code to bring in individual cell values from one closed workbook to an active one. I would like to modify this is possible to bring in multiple cells at once and also pull them into a different worksheet in the active workbook. Basically, my command button is on Sheet1 but I'd like the data to pull into a cell on Sheet2.
Private Sub CommandButton1_Click()
With Range("Q9")
.Formula = "='C:Users[Workbook Name.xlsm]Worksheet Name'! N27"
.Value = .Value
End With
i have one workbook consist of many worksheets, i want to have command button in sheet 3 that if i click the button the sheet1 and sheet2 will copy to another new workbook.
View 9 Replies View RelatedThe data in 4 specific cells in C:UsersOfficeDropboxWB1 needs to (upon clicking command button) be copied to the next available blank cell in 4 specefic rows in C:usersOfficeDropboxWB2.
WB1 Specific Cells List
Sheet1!A4
Sheet1!Q7
Sheet1!N22
Sheet2!E3
Data from these cells are to be copied to the rows listed below respectively.
WB2 Destination Rows (Next available blank row)
Sheet1! Row B
Sheet1! Row D
Sheet1! Row F
Sheet1! Row J
I gather from reading other posts that sending this data within the same WB is fairly easy, is it easy to do between WB's though as i must have seperate WB's?
I have been looking at summing closed workbooks here and decided that due to the problems people are facing I would be better off opening the workbooks
I have a command button that makes the cells switch between 2 sets of data.
The second set of data is held in a second workbook and needs to be recalculated every time. Works fine if the workbook is open but only returns the saved values if closed.
If have added some VBA to the Command Button that opens the 2nd spreadsheet, however, is there a way to get it to open in the background rather than on top of the sheet I am working on.
My humble approach has been to write a macro and then edit it to go back to the original sheet I have been working like so:
Private Sub CommandButton1_Click()
'
' OpenABC Macro
' Macro recorded 21/04/2009 by martin.lucas
'
' Keyboard Shortcut: Ctrl+Shift+M
'
ChDir "L:CustomersABCABC Stats"
Workbooks.Open Filename:="L:CustomersABCABC StatsMasterABC.xls", _
UpdateLinks:=0
Windows("TopLine Management.xls").Activate
End Sub
Can this be done without the user knowing it has happened.
and can a check be done so that excel does not try to open it again if it is already open.
I am trying to enable a command button on opening the Workbook, However it dosent work. I have placed the command button on the worksheet. Programatically it gets disabled on clicking it once. So i want it to be reactivated on reopening the Workbook.
View 5 Replies View RelatedI am using Excel 2010. I am using a shared workbook that was originally created in Excel 2003. This workbook has a command button that is supposed to be clicked to open a userform. However, I cannot even click on the button when opening the shared form in Excel 2010. When the form is not shared, the button works fine.
I have no problems with the button when opening the shared form in 2003 or 2007.
Is there anything I can do to make the command button work while the form is shared and while using Excel 2010?
I'm having a problem creating a Reset All command button that will remove user entered unlocked cell values from an entire workbook save for one specific worksheet. So for example, I have five tabs labeled as "DTF", "Week 1", "Week 2", "Week 3" and "Week 4". I want one single command button (placed in the "DTF" worksheet) to remove all of the unlocked cell values from "Week 1" to "Week 4".
View 9 Replies View RelatedI have a workbook with two worksheets, "Main" and "Control".
Both of them are with hidden tabs (unchecked "show sheet tabs").
On worksheet "Main" I have command button which opens worksheet "Control".
The assigned makro is: Sheets("Control").Select
The problem is: when I open "Control" and close after that the workbook, the next time when I open the workbook "Control" pops-up instead of "Main" even though I do not save it.
1. I need macro on "Main" which will allow me to open "Control".
2. Regardless I "Save" or "Don't Save" "Control" when selected and workbook is closed, to open the workbook always displaying worksheet "Main".
I use Excel 2007 (at home) & 2010 (at office).
Copy data from workbook, open existing workbook, select range and paste. But my copied data is lost.
Sub Select_Copy_Paste()
'
'
Windows("ElektroFunctiesDatabase.xlsm").Activate
Sheets("PowerSupply's").Select
Range("A2:I6").Select
Selection.Copy
[Code] .........
' Here i need to do something to paste data into r.address?
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies View RelatedI have some vba that opens a closed workbook, copies data from a named range and then pastes it to the active workbook.
However, what is happening is that the closed workbook is opened and only part of the data is pasted. What I would prefer to happen is this:
Open the closed workbook-->copy the named range-->paste(append) to next empty cell in column B.
Heres the code that I have got.
Sub Workbook_test()Dim wb As Workbook
Application.ScreenUpdating = False ' turn off the screen updating
Set wb = Workbooks.Open("G:WAREHOUSEPlanningSmartNew Training Plan raining plan.xls", True, True)
[Code]....
On one workbook I have "column A" that lists serial #'s, one serial number per cell. What I need is to be able to take all the non blank data from that column and copy it to another workbook with all those serial #'s in 1 cell numerically sorted and separated by commas.
View 1 Replies View RelatedWhen you click on a command button what would the vba code be to copy the data from the active excel workbook active sheet so that it ends up in the active word document?
I want the values from:
Cell A1 value in Excel to bookmark name "Text1"
Cell A2 value in Excel to bookmark name "Text2"
Cell A3 value in Excel to bookmark name "Text3"
to be copied into the active word document.
I have a sheet named sheet9 and i want to copy the data from this workbook-sheet9 to a workbook called import data and sheet named "database".
View 5 Replies View RelatedI am creating a spreadsheet to provide to a group of about 40 people. The spreadsheet allows each member to track the referrals they receive and give. I need to plan on creating updates for the spreadsheet and want to make it so they can easily transfer their data to the most current version in the future. Here is a breakdown of the workbook:
Worksheets:
Members
Lists
Referrals Given
Referrals Received
Totals
Formulas
I need to copy the data that they have input from the following worksheets:
Referrals Given
Referrals Received
Here is a breakdown of the "Referrals Received" worksheet:
A1:V4 - Data that will not change and includes many named cells
A5:Nxxx - Dynamic Named Range where they input their data
O5:Vxxx - Contains formulas
I need to be able to copy
A5:Vxxxxx
from the old workbook to the new
Some side items to note:
There is VBA in the worksheet of
Private Sub Worksheet_Change(ByVal Target As Range)
and included in the code is an Unprotect & Protect code to always keep the sheet protected
I figure whatever works for this sheet will work for all the sheets.
In sheet1 I have different dates include different month as well.
I want to copy and paste current month data to sheet2 with command button.
I have a time card report which will record the time spent on work for each employee. Each month, i have to generate the time card report and copy the data to my master file. Is there any code that can auto copy the time card entry directly to the master file? I only need some of the entry on the time card report, some of the column can be ignored.
I was thinking of creating a macro that will prompt me to choose the file to import as there are different file for different individual. Attach here with the master list (Demo.xls) & the time card for one individual (Nov-KTTHAM.xls) for reference.
I want to copy the data on column B of the time card to the column A of the master list, column C to column B, column D to column C, column E to column D, column F to column E and column G to column G.
How can i copy paste a set of data from a workbook to another workbook. for example i will copy cell D10:I10 of workbook1 to cell B2:F2 of workbook2.
I am a macro newbie and I think this is beyond me.
I've been trying all morning with no success to make a macro that will copy data from all columns of one workbook containing specified header text to a single column in a different workbook.
So for example, I've got a workbook called coupon barcodes that has multiple tabs for each person redeeming coupons on sheets 2-88 (sheet one can be skipped) and some of the columns are labeled "voucher 1" in cell A4 or B4 or C4 etc. with a list of all the coupon barcodes that customer redeemed below that. I want all of the data from all of the columns in this workbook that have the header "voucher 1" to be copied and pasted into one column (order doesn't matter) also labeled "voucher 1" in another workbook I have open called vouchering database.
There must be a way to do this that is easier than searching the internet all afternoon again
=IF(ISERROR(INDEX($A$1:$B$10,SMALL(IF($A$1:$A$10=$A$10,ROW($A$1:$A$10)),ROW(1:1)),2)),"",INDEX($A$1: $B$10,SMALL(IF($A$1:$A$10=$A$10,ROW($A$1:$A$10)),ROW(1:1)),2))
I have 10 columns in workbook 1 and i am tryin to populate all the data from
10 columns of workbook 1 in to workbook 2. but the prob is if i use the above
formula, i have to modify it in all the columns of workbook 2 to get the data
from workbook 1. what makes my job easier is if i cld use the above function
or any other to populate all the 10 columns of workbook1 in 10 different
columns of workbook 2 without having to use the formula 10 different times
and modifying it each time. its like writing the function in one cell and all
the 10 cells get populated by itself in workbook 2 with the data from
workbook 1. I used the above function as there are dupluicates in the data
and vlookup dont work in that case.
Would it be more efficient to do this while both workbooks are open or to code it in such way that the code opens the workbook, copies the range, selects the first workbook, copies the range and then closes the second workbook?
The way I have it setup now is something like this..It requires some interaction from the user. I was hoping to have EVERYTHING work behind the scenes, but if it will be faster to do it this way then I will keep it that way.
Set MyBook = ActiveWorkbook
MySource = Application. GetOpenFilename
Set wbSource = Workbooks.Open(Filename:=MySource)
Set rngJ18Cpy = Range(Range("B4", Range("I" & Rows.Count).End(xlUp)))
rngJ18Cpy.Copy Destination:=don 't know yet
I have two separate workbooks, one is used to create job estimates, and the other is like a running list of the estimates ( Tracking Sheet) that have been entered and completed. What I need to do is send select data from the estimates workbook and enter it on the last line of the Tracking Sheet workbook in a certain order.
Sub copy_to_another_workbook()
Dim smallrng As Range
Dim destrange As Range
Dim destWB As Workbook
Dim Lr As Long
Application. ScreenUpdating = False
If bIsBookOpen("P&WM Estimate Tracking Sheet.xls") Then
Set destWB = Workbooks("P&WM Estimate Tracking Sheet.xls")
Else.............
using Excel 2007/Vista
when I go a new edit a macro, I get the message
"Cannot edit a macro in a hidden workbook. Unhide the workbook using the unhide command"
Where do I find the relevant "unhide command"?
I m not able to use the standard Excel Paste Special function when I copied a range of cells in another Excel workbook opened in a separate instance of Excel. Instead, Paste Special thinks that I have copied some non-Excel objects and gave me the Paste As options. This is not the case if I open both workbook within the same instance of Excel. Could you share with us if there is a trick to trigger the normal Paste Special options in such situations (without having to invoke Macro procedures)?
View 2 Replies View RelatedI have been trying to edit a code which previously saved a copy in a new workbook to a specific folder/path. (Additionally it copies and clears some figures, but this is working as it should.)
However I would like the copy to be saved at the same location as the original workbook, regardless of the path the original workbook is saved.
I.e if I need to move the workbook containing the code to a new folder/location, when using the macro, the new copy should be stored in the same folder/location as the original one.
For now it is only saving the copy into "My Documents"
Code:
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 16-02-2009 by ceng
'
Sheets("Bunker ROB").Select
Sheets("Bunker ROB").Copy
ActiveWorkbook.SaveAs Filename:= _
ActiveWorkbook.Path & Range("D3"), _
FileFormat:=xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
[Code] ........
I run a model in Excel that automatically saves my file every xx iterations. After saving the file I want to make a backup of the file. Tried
[Code] .....
but get a permission denied error message.
I don't want to use .SaveAs as it is a huge file that takes a while to save and SaveAs has a tendency to break links that should not be broken..
I have an open workbook (A) and this is where the code should reside. I want to use VBA to copy the content of an entire worksheet from a closed workbook (B) to an existing worksheet in workbook A. How would you accomplish this?
View 7 Replies View RelatedI have 2 workbooks. 1 is where data is entered called wksPB, the other is like a database workbook. The wksPB has data to be feed from column B to F and there is a dropdown.
what im looking to do is, if the combobox value is selected as Decline then it should display a messagebox that reference value in cell B is denied. if combobox value is Agreed then the macro should search the database workbook for the text entered in column b of wksPB and then copy data of C:E of wksPB to H:J of database sheet where that text is found and also the approver name in wksPB C24 to the approver cell of where that text was found. I've reached till finding the text but what I get my head twiting on is how to copy the text from wksPB column B:F to database sheet column H:K. Im attaching the sample workbooks and the code where ive reached till.
[Code] .....
Attached Files
Replacement Records - 2014.xlsx
forum file.xlsm
I need to copy a range of values (actually two ranges). The ranges are of fixed size. Le't say A2:D20 and E2:H20.
Both workbooks have the exact same layout, and they both have the same named worksheet (in this case it's called Entry). However the actual filename of the source workbook is unknown. I know numerous users have changed the filename of the xls file.
I want to instruct them to open the old and new workbook, and open a third workbook containing the copy macro, they run the macro and it copies the data.
How can I reference a known worksheet name but of an unknown workbook name esp when the source and destination share the worksheet name?