I have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
I have a start time in one column, end time in another and a column with the difference between the two. In another column I have profit. In the last column I have profit per hour where I divide the profit by the hours, but since one is hours and the other is a number it gives me an error.
In the frmula below, Is there a way for the operator to input a number between the range that is shown size of inducer wheel. Example: 2.277" could be inputed as 2.267 to 2.287" anything else would be rejected.
Air OutletGeometry# of Bolt HolesSize of Wheel Inducer "0.010" Noise SuppressorBackplate flange styleA/R ratioCastingPart # StraightFixed62.277"YesFlat0.58AStraightFixed62.277"YesFlat0.58AVA-11-763 - 449633-0039 VA-11-763 - 449633-0039==IFERROR(VLOOKUP(J5,Cat,10,0),"******")
I am attempting to create a formula that will count the number of times, lets say letter A, occurs in column E. However, the tricky part that I have been confused on is that I only want to count how many times A occurs between each hour of the day. I need to count number of times "A" occurs between each hour of the day for the entire month.
My Worksheet looks as such: Column A contains the dates for the month of November, Column B contains times that random instances occur, Column C is not important, Column E contains a Letter A-N that pertains to what occurred at a time in column B. SO, Column B and column E coordinate with each other.
Here is an example. Column A - Cell A1 - 11/01/2013 , A2 - 11/02/2013, A3 - 11/03/2013. Column B - Cell B1 - 12:01 AM , Cell B2 - 14:03 , Cell B3 - 15:23 Column C - Cell E1 - A , Cell E2 - A, Cell E3 - B
So I would like Column F to display that between 12:00 - 12:59 Am there was X number of times the letter A occurred throughout the entire month.
I have two columns of numbers (I'm going to call them Column A & Column B). There are 23 rows with these numbers. There is another column (Column C) which is also 23 rows of numbers. I am trying to find a way for a designated cell that falls between the two numbers in Column A and Column B to display the number in Column C. The numbers would work their way across the row. For example, if cell A1 had a value of 1 and B2 had a value of 10 and cell c3 had a value of .034, if the designated cell has a value of 7, I would want the cell below the designated cell to show the value of .034. I can't use the if/then function because of the 7 limit. I also can't use the vlookup because there is a range of numbers instead of an equal to.
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result: X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant A(1, 1) = Range("C3").Value A(1, 2) = Range("D3").Value A(1, 3) = Range("E3").Value
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
I have a set of data (Data tab) that lists name, a high number, a low number, and the state that is associated with the name and range between the high and low number (see attachment). I am trying to figure out a formula that will return the state value based on a match of the name and the number between the high and low. I am trying to use Index/Match but i cant figure out the "between the high and low" portion.
I have a time sheet in which i need user to enter a time sheet number in cell c14
I need a formula for that cell so the user can input the time sheet number but only be able to do this if the time sheet number they are imputing is the next number in sequence of the last one used.
I have a sheet which details specific card numbers in Column A, and the date and place of transaction in the Column B. This very long list contains multiple entries for each card number. What I would like to do is use Sheet2 to list each card number and the number of times it appears in the list.
Id like to run a Sub Macro a certain number of times, dependant on the amount of data provided. It could be that I need to run it say 290 times today, but 500 tomorrow.
Is there a bit of code to say, run the macro '500' times?
At the moment, if I set it to run more than it would need to it debugs and gives a compile error, procedure to large.g
Is it possible to determine how many times a formula will be used? Here’s my problem.
I have items that are bought, and then altered. So I need a cell to determine how any times my ‘IF’ formula is used. My current formula is:
Formula entered into D3.
=IF(D2>0,D2,””)
Row 2 is the amount and Row 1 are dates.
If I drag the formula to the right, E2 will be equal to 0 so will enter 0. But I need it to say what ever is in D2 3 times. (As this particular item takes 3 weeks to do) So D2 & E2 & F3 will all have whatever was entered in D2.
I have an interesting problem (I hope you find it interesting too). I'm trying to find the historical "high" day of the week for a particular stock I follow. I searched for several hours but was honestly unable to make any progress. Normally I do my own formulas, so other than pasting a rare macro, that's pretty much the extent of my (lack of) experience, ie please assume I am a novice....
I currently use a manual time clock for my employees to punch in and out. I then use Excel to tally their times. This is very tedious and error prone.
Is it possible to use Excel as the timeclock itself? I know that the employee can enter the time in a spreadsheet manually. But this also opens the door for error and potential dishonesty.
What I am looking for is, if the employee can punch in and out by doing a keystroke and Excel uses the computer's clock to timestamp.
I have this list with articles at work. It looks like this:
1 1 1 2 2 2 3 3 3 etc
I wish to find out if any number in a column appear more then 3 times, and if it does, return that number to be. Is this possible with a formula? I've tried, but didn't succeed.
I have a problem with LAN function. I have following formula to count how many times appears number 2 in a box: LEN(I5)-LEN(SUBSTITUTE(I5,"2","")) in I5 I have 1,2,3,12,34,22,21 . Outcome is 5 which is not what I need. What I wanted to do is to get output of how many times appears number 2, not how many times appears expression 2 (it counts also 22, 21, 12, 2) . The output that I need should be 1 since number 2 appears just once in the box.
I want to count every time a certain cell changes. For example, if C2 is currently set at August 5, 2007 and I change it to August 12, 2007, then add 1 to cell B2.
I'm trying to repeat a macro a set number of times depending on the number a person inputs into cell B3.
Here it is currently: Columns("C:D").Select Range("C4").Activate Selection.Copy Columns("E:E").Select Range("E4").Activate Selection.Insert Shift:=xlToRight Range("C3:D3").Select
I have created a userform with 4 textboxes and "ok" button. whenever I press OK I want it to copy TB1(text),TB2(number) and TB3(number) in the first empty row a number of times based on what is in TB4(number). however, each time it has to add 1 to TB2 and whenever (TB2+1) exceeds 5 then 1 is added to TB3 and TB2 start over from 1 again.
I have a task which I am sure can be done quite simply. I have a list of names in column A and a number in column B. I want a Macro to copy the name in column c, d, e etc for the number in column b.
