I have created a userform with 4 textboxes and "ok" button. whenever I press OK I want it to copy TB1(text),TB2(number) and TB3(number) in the first empty row a number of times based on what is in TB4(number). however, each time it has to add 1 to TB2 and whenever (TB2+1) exceeds 5 then 1 is added to TB3 and TB2 start over from 1 again.
View 3 Replies
I'm trying to modify this line:
Range("A2").AutoFill Destination:=Range("A2:A10"), Type:=xlFillSeries
I trying to copy down a formula a set number of times based on a cell value or a declared value.
I have a task which I am sure can be done quite simply. I have a list of names in column A and a number in column B. I want a Macro to copy the name in column c, d, e etc for the number in column b.
View 9 Replies View RelatedI am not good at writing codes and so would really appreciate if someone could help me.
I have a range suppose A1:D50 which i want to copy it certain no.of times, say around 50 times below the original range or in another sheet.
Can a code be created where I have a useform , where I will be entering the number for eg.50, which will copy the range 50 times below the original range or in new sheet.
Just curios if this is the most efficient way to copy a workbook x number of times.
I tried copying 77 workbooks and not sure exactly how long it took, but about 2 mintues. The original workbook is 300 KB.
I enter a part number in "D1". The number of components required for that part number is returned in "G1" based on a VLookup. I would like a macro that will copy and paste the part number I enter in "D1" in the first empty cell in column "D" and will paste it once for each component (G1) required. For example, if the number of components required is 4, and the first empty cell in column "D" is "D10", I would like to paste the part number in cells "D10", "D11", "D12", and "D13".
View 2 Replies View RelatedSay I have (cell A1) 10 salespeople and they each sell a (A2) $100/month membership, so I have (A3) $1,000 monthly revenue.
(A4) is an assumption about how many months the average person will stay a member.
So if A4 = 6, (6 month membership assumption) how would I get Excel to output $1,000 (the result from A3) into cells B3 through B8
but then for instance if A4 = 3 (3 month membership assumption) it would only output the the $1,000 result from A3 into cells B3 through B5
So like A1 through A4 of...
10
$100
$1,000
6
would output $1,000 into B3 through B8
but
10
$100
$1,000
3
would output $1,000 only to B3 to B5
I have a excel table in Cell B2:C2 to B10:C10 in sheet1. I need to copy this table "x" number of times as specifiedin A2, with an row offset (gap) of 10 rows starting D2 in sheet2.
But somehow, only the first row of the data is getting copied?
I have the following macro: .....
I have a large amount of data and I'm trying to count how many unique values I have in one column. I also want to know how many times each duplicate appears. I tried using a pivot table but it's not working for me.
I also tried the following formula: =SUM(IF(FREQUENCY(H:H,H:H)>0,1)) but it's not quite working.
Is there a function that allows you to read column A for an ID (these may or may not include letters/numbers/"?", are non-sequential and are of variable lengths) and, if it is the first time that it has seen an ID column B will read "sample_1_arm_1", if its the second time it has seen an id it will read "sample_2_arm_1", etc? An example of what I am trying to do on a much larger scale:
id
event_name
C83-858
sample_1_arm_1
[Code].....
I am trying to come up with a macro that selects values from one sheet and inserts them into another sheet. The number of values will change each time based on the user's entry, as well as the number of times that each entry should be pasted.
For example:
Entry: X | Y | Z
Number of Times to be Inserted to New Sheet 3 | 2 | 1
Result:
X X X Y Y Z
I have spent a while trying to figure it out, however the best I can come up with is using an array, but I can only get one value from the array to paste multiple times:
(*Note: In my testing, I didn't insert into new sheet or set up the array to handle different values, I was just trying to get the basic idea to work)
Dim A(1, 3) As Variant
A(1, 1) = Range("C3").Value
A(1, 2) = Range("D3").Value
A(1, 3) = Range("E3").Value
[Code].....
I've tried everything I know (which isnt that much to be honest. lol). Ive tried the frequency formula but that doesn't work the way I want it - I think its probably the wrong formula to use. I've also tried a pivot table but they always vex me. If a pivot table IS the way to go, could someone talk me through it step by step? (*the wizard is just as confusing as doing it yourself I find) ....
View 9 Replies View RelatedI have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
I wish to calculate the total number of combinations using the number of entries in 6 fields regardless of what the actual entries are. In other words only the number of entries are relevant. They look as follows for example:
Field A1=4; Field B1=3,5,12; Field C1=9,2,11; Field D1=14,1,5; Field E1=18,2; Field F1=3,7
Calculating it using a calculator is too tedious since I have several rows of data with similar entries. I just need to know what the total number of combinations are eg in the above example 1X3x3X3X2X2=108 using some excel formula.
Using Excel 2007, how can I copy several HTMLTextArea value fields into a range?
View 9 Replies View RelatedI've attached an example of the .xls file.
There are four data worksheet. Each share a common column data set; ITEM NUMBER. Is there a way to create a macro so that when you enter an ITEM NUMBER into a textbox on the "Output sheet" page, it will automatically gather all rows from all worksheets that is associated with that ITEM NUMBER?
Also, on worksheet 3, the ITEM NUMBERS have an extension that defines the type. Can a wildcard be setup so that it will only match the first six characters of the cell?
I want to filter data using two sheets. i want only the names in a field that are listed on BOTH sheets. i have a two lists of names and i want only the names that are included in both sheets while still including the rest of their information.
View 4 Replies View RelatedI created this formula =G2*2.9%+.3
what I am trying to do is take the number in the G column multiply it by 2.9% and add 0.30. For instance if 20.00 is in the G2 cell, the number I want the formula to produce is .88
the formula works for me but what happens is the rest of my sheet that does not have any numbers in the G column gets filled with .30
How do I prevent the formula from calculating if the G column is blank?
Writing a macro in excel where you can use the data in your excel file to copy data to microsoft project.
I have an excel file of task name, deadline, time remaining, and assigned to and I want to copy those 4 columns to a correlating column in project. So basically I would loop through these fields on each line til I reach a blank which could be entering a varied amount of tasks.
The full macro would change ms project start date to today's date then copy the 4 columns from excel to project to add a new task for each line in my file and then save the project file.
I've seen some links on macro with project but most are more advanced then this or are exporting data from project to excel.
Using Excel 2007, how can I copy several HTMLTextArea value fields into a range?
Cross posted:
http://www.mrexcel.com/forum/showthread.php?t=361659
I have the catalog #s of some products in column A, and I have the brand in column B, Product name in Column C, and the model # in Column D. I want to create a formula that if I select the catalog # it should autopopulate the brand in column B, product name in column C and the model # in column D!!
And I have the brand/product & model # in a different sheet!!
I'm currently working on a maintenance task sheet for a couple of generators. I have successfully created button macros to input dates. I would like a macro to copy all the cells that are RED (due to a condition rule) plus their associated fields to the left from worksheet "Schedule" to worksheet "Tasks Due". [URL]
Here's the pre-programming flow, I just don't know the code to do it:
Scan worksheet "Schedule" for red cells in following Range
H8:I16,H18:I22,H24:I35,H37:I41,H43:I49,H51:I59,H61:I72,H74:I75,H77:I84,H86:I89,H91:H100
If cell = red Then Copy Row A:I
Insert Row into sheet ("Tasks Due")
If red cell is in worksheet "Schedule" H8:I16 then insert copied cells in worksheet "Tasks Due" one below cell = Fuel System
If red cell is in worksheet "Schedule" H18:I22 then insert copied cells in worksheet "Tasks Due" one below cell = Lubrication System
[Code] .....
If my uploaded workbook doesn't work I've linked screenshots of my document.
Top of "Schedule" worksheet: [URL] .....
Middle of "Schedule" worksheet: [URL] .....
Bottom of "Schedule" worksheet: [URL] .....
"Tasks Due" worksheet: [URL] .....
I have a spreadsheet with a heap of raw data in it. I need to perform a search based on a customer name, then return certain columns from the raw data IF the customer name is matched in one column, AND a special flag name is matched in a second column. The customer name is always a single entry for the purpose of the query, however the special flag must be checked against a possible list of values in a table. I know this is hard to explain, and I can't add attachments to my posts, so I have created a sample document and placed in in dropbox:
[URL] ........
I am trying to count the number of rows that have values greater than 10/01/2008 in either of two fields. I tried following formula but instead of giving total number of rows, it returns a random date.
View 2 Replies View RelatedI want a cell to tell me how many times the number 12 is in a group of cells. Is there a formula or something that will.
View 4 Replies View RelatedAttempting to do a countif as follows
Count the number of times that F2:F65536=Q1 where E2:E65536 also = N2.
So for a given row, the cell in col F needs to equal Q1 and the cell in col E needs to equal N2 for it to count.
Id like to run a Sub Macro a certain number of times, dependant on the amount of data provided. It could be that I need to run it say 290 times today, but 500 tomorrow.
Is there a bit of code to say, run the macro '500' times?
At the moment, if I set it to run more than it would need to it debugs and gives a compile error, procedure to large.g
Is it possible to determine how many times a formula will be used? Here’s my problem.
I have items that are bought, and then altered. So I need a cell to determine how any times my ‘IF’ formula is used. My current formula is:
Formula entered into D3.
=IF(D2>0,D2,””)
Row 2 is the amount and Row 1 are dates.
If I drag the formula to the right, E2 will be equal to 0 so will enter 0. But I need it to say what ever is in D2 3 times. (As this particular item takes 3 weeks to do) So D2 & E2 & F3 will all have whatever was entered in D2.
I’m looking for a code which copies information from one worksheet to another and duplicates each row 3 times.
So for example on sheet 1 I’ve got data in C12-H12, C13-H13, C14-H14 etc.
The macro should copy the information C12-H12 to row 1,2 and 3 on the second sheet and than information from C13-H13 to row 4, 5 and 6 etc. Hope you understand what I’m trying to do.
I started with the following ...
I have a start time in one column, end time in another and a column with the difference between the two. In another column I have profit. In the last column I have profit per hour where I divide the profit by the hours, but since one is hours and the other is a number it gives me an error.
View 4 Replies View Related
