I am looking for a way to calculate the average time, over a number of times.
So basically, would have different times in 24 hour hh:mm:ss, all in column i.
I have tried =AVERAGE(i2:i18) and it doesn't work.
I have also tries Ctrl/Shift enter as an array, it didn't work.
I tries to format cells as time and number, it didn't work!
I'm trying to calculate whether a time value located in a cell is between the times in two other cells. Here is what I tried:
=IF((AND($A62>=C$55,$A62
Need a ormula that will calculate various lengths of time within a column.
For example: I would like to be able to add
02:43 (2 minutes 43 seconds) plus
01:10 (1 minute 10 seconds) plus
05:15 (5 minutes and 15 seconds)
..and accurately arrive at the sum of
09:08 (9 minutes 8 seconds)
Currently, whenever I input the value of 02:43- and assign the value of 'TIME'.. it reads it as 14:23 (clock time..not length of time.) I will only be using data that follows the format of mm:ss (minutes:seconds).
I need to create a formula to calculate monthly hours worked (144.20) by hourly rate (£14.25). So far everything ive tried has given me awrong answer. I cant seem to make the total right. From what ive come up with (Not good) the total accepts the hours-just not the minutes.
View 8 Replies View Relatedhow to find the average times of two different sets of groups. There are the baseline times and intervention times. Both groups have three subtopics: Time Fell Asleep, Woke Up, and Duration (how many hours I slept). I am not sure how to find the average of each subtopic. Here are the times....
Baseline times:
Fell AsleepWoke UpDuration
2:30 AM10:00 AM7:30 hrs
4:30 AM12:30 PM8:00 hrs
[Code]....
I need to find the average time it takes students to take exams . I use the following formula =text(end time - start time, "h:mm"). I am able to calculate the amount of time it takes a student to take the exam. Now I need a formula to calculate the average time students take to complete a test. I have over 80 times i need to average. Whenever i try a formula I keep getting 0.
View 9 Replies View RelatedIs there a way to calculate the number of hours between two times specified like this:
Start
End
Hours
Comments
Mon 6:00p
Mon 9:00p
3.00
Same day
[Code]..
I think I can write a UDF and that may be the easiest. Is there a straightforward way without a UDF?
I have a set of 7 years daily rainfall data. I need to calculate the daily average of rainfall from this 7 years data set. I don't wanted to calculate it by for example copying and pasting the first day rainfall of each year rainfall to a new sheet and average it for all the days. I need to calculate it all at a time.
View 1 Replies View RelatedOn my spreadsheet i have a bunch of variables:
A1 = Arrival time at Checkpoint 1 - 5:53:08
A2 = Time to destination from Checkpoint 1 - 1:10:18
B1 = Arrival time at Checkpoint 2 - 6:00:56
B2 = Time to destination from Checkpoint - 1:02:30
C1 = Total distance from Start - 2.83
C2 = Arrival Time at Destination - =SUM(A1,A2)
D1 = Speed determined from the other variables
D1 is SUPPOSED to equal 25.00
It also is where I am stumped!!
Not only can I not figure out the math but also how to format the function to get the right answer.
ps: Arrival Time at Destination is only included in case it would be useful to find the answer!
I am trying to calculate the average start time for a machine over a period. However the machine start time varies from 10:00 pm to past midnight. I have tried reviewing past posts but cannot seem to find a similar query.
View 13 Replies View RelatedI have time start and time end and the difference between the two times. In a third column I have profit and want to calculate the profit per hour. When I divide the profit with the time spent I get a very very high number. If I for instance type in 1 hour of work and profit 100, then I get profit per hour 2400. (profit/hours spent)
On a side note I am trying to get the numbers as 24 hours and not use am or pm and in the spread sheet I get these numbers but in the box at the top where you see the formulas etc. it shows as am and pm. I have uploaded an example.
I want to calculate the number of times Lampard has taken and Inswing delivery, and how many times an attempt at goal ocurs from these deliveries.
The equation i'm using is =sum(if(a1:a100="Lampard",if(a3:a100="inswing",1,0)))
However, this is not calculating the correct number, and instead just equating 1.
I have a start time in one column, end time in another and a column with the difference between the two. In another column I have profit. In the last column I have profit per hour where I divide the profit by the hours, but since one is hours and the other is a number it gives me an error.
View 4 Replies View RelatedI need help with a formula to calculate average number of rebills per client.
I don't know how to get excel to add the number of unique client in a given row. Example
Column A
Client 1
Client 1
Client 1
Client 2
Client 2
Client 2
Client 3
Client 4
Client 4
Client 4
Client 4
Client 5
Formula needs to calculate number of Unique clients. In this case, the answer is 5, but how can I get excel to calculate for me?
I have a worksheet that has all weekday dates in column 1 and values in column 2. I want to create a 30-day moving average based on the last (non-zero) value in the column 2.
Since every month has a different amount of days, I want it to search the date that has the last value (since I don't get a chance to update it daily) and go back thirsty days from that date and give an average of all the column 2 values skipping and values that are null or zero.
In my workbook I have about 20 sheets (less in the attached sample), and on most sheets I’d like to query data for each day and find an average value based on the time and then copy that result into another sheet. I’m not sure if I’ll need 2 macro’s for this or if one can be used.
Here’s a quick description:
Assuming that I am currently in the sheet I want to run the macro, then I will either input “1:45” or “0:45” into a popup box, or I could always simply input the 1:45 or 0:45 in the code itself. I’m flexible
1:45:
If I input 1:45, then I’d like the macro to find the first 1:45 in Column B and the value in the same row in Column F will be used in the calculation. Once 1:45 is located, then the macro moves up to find 22:45 in Column B and the value in the same row in Column F will be used in the calculation.....
I am attempting to create a formula that will count the number of times, lets say letter A, occurs in column E. However, the tricky part that I have been confused on is that I only want to count how many times A occurs between each hour of the day. I need to count number of times "A" occurs between each hour of the day for the entire month.
My Worksheet looks as such: Column A contains the dates for the month of November, Column B contains times that random instances occur, Column C is not important, Column E contains a Letter A-N that pertains to what occurred at a time in column B. SO, Column B and column E coordinate with each other.
Here is an example. Column A - Cell A1 - 11/01/2013 , A2 - 11/02/2013, A3 - 11/03/2013.
Column B - Cell B1 - 12:01 AM , Cell B2 - 14:03 , Cell B3 - 15:23
Column C - Cell E1 - A , Cell E2 - A, Cell E3 - B
So I would like Column F to display that between 12:00 - 12:59 Am there was X number of times the letter A occurred throughout the entire month.
I'm looking for a formula that will calculate the difference in times between specific times while working with a 24 hr clock. Please see details below:
E3 provides the start time of 4:00
H3 provides an end time of 15:30
If an employee works betwen the hours of 0:00 (midnight) to 5:59, this is considered DIFF hours and is therefore the number I am seaking. So for the data noted above, the total DIFF hours worked is 2 hours.
I am trying to find a way to calculate the number of hours between date/times found in separate rows. The attached data set will help to envision what I am talking about.
For each couple of rows, I need to find a way to calculate the number of hours elapsed from row 1 to row 2. In the first example, to calculate the number of hours between 12/2/2009 8:56:51 and 12/4/2009 6:35:27.
Ok, I for some reason just cant wrap my head around this. I need to to get the average time per call of two rows, but they are based on how many calls taken.
so in one column i have 50168 calls taken at 4:21 seconds per call. and in the next row i have 597 calls taken at 5:20 per call. I need to see what the new average will be with them combined, and I need it to display in m:ss form.
This sheet has several years of data so is full at 65,000 rows.
One issue is that there may be skip or gaps in the date sequence, so I can't rely on the relative position of cells to be accurate.
Thanks for any ideas!
******** ******************** ************************************************************************>Microsoft Excel - solar1.xls___Running: xl2000 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1=ABCD6492810/1/200313:00:00308 6492910/1/200313:15:00302 6493010/1/200313:30:00280 6493110/1/200313:45:00323 6493210/1/200314:00:00366 6493310/1/200314:15:00317 6493410/1/200314:30:00247 6493510/1/200314:45:00219 6493610/1/200315:00:00259 6493710/1/200315:15:00259 6493810/1/200315:30:00233 solar1 [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name boxPLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
If you have some low time resolution data you need to compare with high time resolution data how do you average the high resolution data. For example data that starts and ends a fortnight apart and you want to compare it with data that starts and ends 1 hour apart you need to average the hourly data to do so. I can't figure out how:
So if I had Sheet 1 with hourly data
A B C D E
1 Date, Time, Measurement
2 01/01/2014, 01:00, 62
3 01/01/2014, 02:00, 38
etc....
Then in Sheet 2, fortnightly data
A B C D E
1 Date on, Time On, Date Off, Time Off, Measurement
2 02/01/14, 15:23, 18/01/2014, 12:25, 52
3 18/01/2014, 12:25, 01/02/2014, 14:19, 34
etc....
I'd want to add a new column of data to average the hourly data so I can use the correl function.
I am trying to get an average of delivery times.
On Monday's I have time's of:
How can you find the average of times?
I have times like
00:01:00
00:00:15
00:00:08
All are in dd:hh:mm format
I need to find their average which shld be 00:00:28 (approx 27.6 mins)
When I do average(A1:C1) its giving me div/0 error.
I am measuring elapsed time for an event ie: began at 00:29 in ColA, ended 00:34 in ColB (or began 12:29 AM, ended 12:34 AM) for an elapsed time of 5 minutes. My result is being displayed as 00:05 in ColC which seems perfect at 0 hours and 5 minutes, but excel is seeing the result as 12:05 AM.
I have 20 rows of data and trying to get an average of the elapsed times in ColC
How do I get excel to read this as 0 hours 5 minutes instead of as the time of day?
I am trying to average times from one column that is the difference of two other columns (generally just minutes). It is formatted in a military time format.
However, I do have criteria it must meet from another column.
Ex:
Col A Col B Col C Col D
1 23:57 00:07 00:10 "=C2-B2+IF(B2>C2,1) fx I am using"
2 03:15 03:20 00:05
1 10:30 10:42 00:12
That's the basics, now I want to average Col D but only if it is a "1" in Col A. There are some empty cells, being its formatted for 100 entries. I can get an average of Col D and a count of Col A, but I can't combine them.
I work at a call center, and I need to find the average duration of time our employees spend on the phone. Here are some of the call times:
0:00:00
0:00:01
0:00:02
0:00:03
0:00:04
0:00:05.......
How would I find the average call time of these calls? When I use the formula =AVERAGE(Num1:Num2) I receive a # DIV/0 error.
I am looking for a macro that will allow me to find the mean for all of a specific time during a month. For Example, I want to find the average percentage of capacity for every day at 11:00 am for the month of January.
Percentage of Capacity By Hour Hour Month/Day/Year
0.00% 11:00 1/22/2007
0.00% 12:00 1/22/2007
0.00% 13:00 1/22/2007
0.00% 14:00 1/22/2007
0.00% 15:00 1/22/2007
0.00% 16:00 1/22/2007
0.00% 17:00 1/22/2007
0.00% 18:00 1/22/2007
0.00% 19:00 1/22/2007
0.00% 20:00 1/22/2007
0.76% 21:00 1/22/2007
1.59% 22:00 1/22/2007
1.38% 23:00 1/22/2007
2.68% 0:00 1/23/2007
1.75% 1:00 1/23/2007
3.65% 2:00 1/23/2007
3.40% 3:00 1/23/2007
2.41% 4:00 1/23/2007
I have a sheet set up with date in Column A, time in column C and numbers in column D, starting in row 2 down. I made a pivot table with the dates grouped by day, 7, to show a week and I can group the time by hours, 6am, 7am, 8am. but what I want to do is group the time for times between 2 times, like from 6:00 AM to 10:00 AM, 10:01 AM to 2:00 PM and 2:01 PM to 8:00 PM, what I am wanting to do is group by week, group by the times above and average the numbers for that time. Is there anyway to do this in a pivot table? Or some other way? this is for use in Excel 2003
View 2 Replies View RelatedRefer to the attachment. I am trying to average the data in the Y column, if the times fall into the range between column R and S. I am having trouble with the averageif function. Is there a better way to parse through column W, check if the values fall between the ranges of S and R, and if they do, average the associated values in column Y?
Attached image: Capture.JPG‎