The following code works great:
VB:
Sub send_to_UCC()
Dim upcCode
Dim myTextField As Object
[Code] .....
But when the following code for a different page, does not work.
VB:
Sub send_to_UCC2()
Dim upcCode
Dim myTextField As Object
[Code] .....
Everything is the same except the URL and the textbox name.
The following code works great:
Sub send_to_UCC()
Dim upcCode
Dim myTextField As Object
upcCode = "0001234512345"
Set appIE = CreateObject("INTERNETEXPLORER.APPLICATION")
appIE.navigate "http://directory.gs1.org/gtin"
appIE.Visible = True
Do While appIE.busy
DoEvents
Loop
With appIE
Set myTextField = .Document.all.Item("queryByGtin_key")
myTextField.Value = upcCode
End With
Set myTextField = Nothing
End Sub...........................
Everything is the same except the URL and the textbox name.
I have a spreadsheet where raw data is entered ("RAW_DATA") for each month it is collected. There are 7 questions that are tallied and each of those responses are transfered to a separate data table for analysis (7 individual tabs within the spreadsheet). I'm currently manually data entering the values from the raw data tab to the other seven tabs.
I would like to have VBA code that could transfer the data from one month ("RAW_DATA") onto the other 7 tabs based on the date and facility identified in the raw data tab. I have not attempted the VBA since I do not know where to start with searching on two variables.
My goal is to create a tracker for my work. This tracker would have the data collection in a seperate excel worksheet using forms (embedded), where all of the information initially goes, then with the click of an "Add" button, it formats the information in the cells in the appropriate worksheet (ie: good data goes to the worksheet called "Good" and vice versa for "Bad"), clearing the data from the forms, and preparing for the next bit of information.
Date
Time
Name
Notes
Type (2 radio buttons that categorize the )
Completed tasks (checkboxes stating "Did I do this", "Did I do that", etc.)
I've run into an issue working on a small project.
The project:
A workbook in which sheet 1 is a form for people to input into 2 adjacent columns time spent on different tasks at the end of each work week. Sheet 2 is identical to sheet 1, but has the intended purpose of storing the data input into the form in sheet 1.
There is a button at the bottom of the form in sheet 1 with an assigned macro that effectively transfers all the data to sheet 2 and then clears sheet 1 for another entry.
The issue:
I cannot get the data to transfer to the next available set of 2 adjacent columns in sheet 2. It keeps repopulating the first 2 columns.
modifying the macro to transfer data to the next available set of 2 columns on sheet 2
This is all taking place in vb6 and excel 2003.
I am making a userform that is activated once the user highlights a bit of spreadsheet and clicks a button on the command bar, here is what I want it to do:
1. (copy data from the spreadsheet
this is tricky because I am trying to have it be a conditional situation where the user highlights a place on the spreadsheet and whatever that place is at the moment, it will get copied to a variable on the form.
There are 8 fields to highlight and copy, two with info that wont be copied onto the new spreadsheet but will be used to update fields and make the filename.)
2. make a new spreadsheet:
a. the filename is made from cell values in the 'from' and 'to' columns and the date.
b. new spreadsheet needs to have a template section from a7:f7 that has 4 fields that will be filled in from the fields on the form.
c. copied data is to be moved from old spreadsheet to new spreadsheet to cell a8. There should be 6 columns that will be filled with data.
3. on the form there will be a browse button to save the file in a location specified by user and 'last saved location' name should be saved to a textbox.
I read about a browse button here that I would like to use, but I have to adapt it so it can be used in the 'browse' button. [url]
I dont even know if it is possible to copy a user-specified range. It seems that it should be, because when a user highlights an area, that area is being held in memory as a position... I tried passing these values to another sheet but it wasnt successful. I tried to dim 'selection' as string and pass it into a variable, but I am new to variables and this project is a big experience for me in vb.
I also am still learning about how to make values in a field pass to another field on a spreadsheet.
Every day I receive a csv file of NAMES, PLACES, ADDRESSES, IDS, SPECIAL ID (ETID), ITEMS, QUANTITY, AND OTHER INANE INFORMATION. which is a list of people from places that are ordering item(s) for each ETID)
I CONVERT TO EXCEL BECAUSE I HAVE TO CLEAN THE DATA FORMATTING, AND SPLIT A COLUMN INTO 2 (LAST NAME AND ETID ARE TOGETHER).
I need to put the items into a form, one order per ETID.
I tend to receive on NAME, PLACE, ADDRESS, sending orders for multiple ETIDS.
I don't know the easiest or best way to get the info into the order form. I have designed the form in word and excel.
i need a little help. I have a workbook with 2 sheets. I need rows to transfer to the first sheet automatcily if the record dose not already exsist on the first sheet based on if a vaule in a certin cell is below a certin number.
View 9 Replies View RelatedI am trying to fine an easy way to sort the attached spread sheet. it is a down load from our supplier which has a lot af data that i am not interesed in the only ones i need are columns description (r) and units (o) and name (g).
I am wanting to split each waste i.e oil fitters, acid batteries etc and each site so that the total amount each site has returned can be tabled ,so that i can create graphs showing who has/ has not return their waste steams.
import data from a website that requires a login/password (no login page, it pops up in a separate window like when trying to log onto an FTP).
I've got the login/password, and it's a simple call to the page to import it, but each time it asks me to authenticate when connecting (get the "Windows Security" popup asking me to authenticate).
Even when I select "Remember my credentials", it doesn't seem to, and so every time I end up having to manually hit enter to get by it.
Is there any way to pass the login/password information via VBA, or to get the "remember my credentials" to stick?
We have a list of around 800 clients containing client id, name and e-mail and i need to add contract number. I can only get the contract number by accessing the admin (password-protected) using a URL that looks like this admin/index.php?client=id.
Problems:
1. if i use the From Web option in excel's data tab, i get the entire table not just the needed cell
2. if i get the data using the above mentioned option, i can only do it from one client at a time
Is there any way to have a web query stay connected and get live data from a site while still being able to use excel at the same time?
Basically the site has information that changes by the second and i need to keep a running record of it, and when it hits the variables needed i want to be able to trigger a set of code.
I am trying to create a form to use as a golf tracker. I basically have created a scorecard where I input the date, score, fairways in regulation, greens in regulation and putts. I want to be able to put that information just like if it was a scorecard and then have a button that says submit. Then that information is output into individual sheets (i.e. one for scores, one for fairways, one for greens and one for putts).
I'm missing something in my UserForm initialization code. If I fill the form out once and click 'OK' (run the code to put the form data into a sheet), when I go back into the form all the old info is still there. If I then click 'Cancel' (Unload Me) and reopen the form, the old data is cleared out. What am I missing to make it clear it out the first time?
View 2 Replies View RelatedI'm having trouble trying to come up with a way to insert data fields into a spreadsheet form. I have a travel authorization form that I would like to have automatically fill in the required fields based on typing in a name. i.e. I would type in an employees name, and it would automatically fill-in the correct address, etc for that employee. I have attached a spreadsheet that contains one sheet as the form, and another sheet containing the employee data. I know nothing about VBA, but I have a feeling that is where I need to go.
View 3 Replies View RelatedI am needing to create a form that exports data (a quote) to an Excel Db (table) and is then able to recall the data back into the form. (the default form in excel does this and I want to copy that.)
Once the data is called back in, I can then export it to another Table to show that the quote has been approved and will be used.
I am having trouble with the VBA coding that copies the inputted quote in Cell C2 (the reference for the quote number) of the "Form" sheet and looks it up in the "Database" sheet. I have tried several variations of code, but nothing works so far.
-SS
Sub RecallQuote()
'
' RecallQuote Macro
'
Sheets("Form").Select
Range("C2").Select 'this is the cell that holds the quote number to look up from the table
[Code] ......
find the attached workbook
I have a Database and user form, in the user form i have a field named “Vehicle No” this is a combo box from which a user needs to select the Vehicle numbers, and all these are working fine now, I need your help in the following:
When user selects the second field named "Select Vendor name" i need a pop up window which shows all the Vehicles belongs to the vendor which they have selected, and with the popup window user selects the vehicle number then the Vehicle number combo box should be filled.
Currently users have to select by scrolling through Combo box which takes long time and difficult to find by scrolling.
I have created a registration workbook for this year's youth sports league. All of the information is entered into a User Form and separated onto it's appropriate sheet designated by the child's age. Next year, I would like to use this year's workbook to look up returning players.
Will it be possible to add a "lookup" button into my form, or create a lookup program, that once the registrar clicks on the correct player, the information is plugged into the User Form, the registrar adjusts the age and any necessary info, presses enter, and the information is copied into the appropriate category in the new workbook? I haven't worked with User Forms long enough to know if they can be filled in that way, but if this can be done, you are the people who would know.
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
BDD LIMITED
3 Telford Place
L*****r QLD 4315
Phone: 07 5777 3622
I have a spread with five tabs. Each tab is a person's job responsibilties for numerous properties. Each person works with a property called Orange Avenue. I want to create a tab for JUST Orange Avenue items but want it to automatically pull any and all info from each tab where that person's Ornage Avenue duties are.
cells(a,b):cells(a+4,b) have 1,9,9,0,5
cells(a,b+3):clells(a+4,b+3) have 1,9,0,emtpy,empty.
how to fill 9,5 to empty cells.
I have the following code, saving created files to a local network. I need to change the save location to an FTP site (with username and password). Is this possible/How do I do this?
Sub Filter()
Dim name As Object
Application. ScreenUpdating = False
Application.DisplayAlerts = False
ActiveSheet. Unprotect Password:="letmein"
MYCOUNTER = 100
I'm trying to convert this code so it transfers the data without the input box being needed.
Dim response As Long
Dim strLastRow As String
Dim rngC As Range
Dim strToFind As Variant, FirstAddress As String
Dim wSht As Worksheet
Dim rngtest As String
Application.ScreenUpdating = False
Set wSht = Worksheets("Transfer Sheet")
strToFind = Application.InputBox("Enter Your Initials")
If strToFind = False Or strToFind = "" Then Exit Sub
With ActiveSheet.Range("H2:H5000")
Set rngC = .Find(what:=strToFind, LookAt:=xlWhole)
If Not rngC Is Nothing Then
FirstAddress = rngC.Address
Do
strLastRow = Worksheets("Transfer Sheet").Range("A" & Rows.Count).End(xlUp).Row + 1
rngC.EntireRow.Copy wSht.Cells(strLastRow, 1)
Set rngC = .FindNext(rngC)
Loop While Not rngC Is Nothing And rngC.Address <> FirstAddress
End If
End With
I have to workbooks and I want to populate one of them with data from the other. The receiving document has the fields Account and SubAccount which I need to match up with the account and subaccounts in the other workbook.
However, in the other workbook, the line looks like "1000 Wages 000001" (which is account, name, subaccount). I can't find out how to have my receiving document scanning the providing document and when it finds an account and subaccount (in the above string) that matches the account and subaccount in the receiving document, to bring over the data.
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
View 7 Replies View RelatedThere’s one “master table”. Two columns in master table are titled “Name-1” and “Name-2”, and all columns in front of it carry “Properties” corresponding to these names.
In a “second” table, when we choose/type the Name-1 and Name-2, corresponding properties should automatically be picked up from the master table. Is that possible?
I have a sheet with 1250 data. All are in Column "A" I want to print them out and therefore would like the data also in Column "B" and "D" in order to save printing paper and make it easier to search. Since the data is alphabetical sorted, doing it manually is a big job.
View 6 Replies View RelatedI have a new spreadsheet that I made to give us the break down of each invoice we create. what we want is to see each job that is done (by code), the amount we charge per each, the cost of goods per each, and the profit margin. In this spreadsheet I have two tabs. in tab one it has the form I made that has a place to input the data that will change with each invoice as well as a section that is broken down into columns. In these columns I have it listed this way. CA=Job code, CB=Job Description, CC=how many, CD=Charge ea., CE=rate total, CF=COGS ea., CG= COGS total, CH=profit
I have the formula done for all of the math the get the totals. My idea was to make a second tab. In tab 2 I have everything listed in columns that will go into tab one. It is broken down like this. CA=Job Code list, CB=Job Description list, CC= charge ea. CD= COGS ea.
What I want to be able to do is when I type in the job code in the first cell under the column A on tab one, it will bring over all of the info from tab 2 and put it in the right spot for that code. So if I typed in say TT001 in that cell it would bring over the description matching that code and put it in the cell under B, along with the charge in column D, and the COGS under column F. And I want it to be that way for each code I type in and it will be different each time I fill this out. How do I explain this part? Ok so I a new invoice made its # 22. I take this spread sheet and do what I want and get all the totals so I print it out. I then want to be able to clear all the info and or just type in a new set of codes that will be on invoice # 23 and then #24 etc.
So what I am saying is the codes will be different each time I fill it out. that's why I have them listed on a different tab and will just put them in tab one long enough to get the total and print it out. Is that clear as mud? I will stop here and wait and see what questions I get back.
I have a program I built and need to transfer data from a form, from workbook "C" to another workbook "W". The workbooks are open by different users . 90% of what I locate on the Web pertains to worksheets and what don't, does not work. The folders are stored in my Public Documents.
View 4 Replies View RelatedHow to transfer data from one workbook that's open to another in a macro form. I included two sample data workbooks I have. Sample will have the macro inside it and will already be open for the other portion of the macro that will be running. I already have code that will open up the Sample2 file. I'm trying to take specific data from Sample and paste it into a summary sheet in Sample2. In Sample i will be cycling through roughly 30 sheets to find this data but I only included one because I just need to know the basics on how to make this work and then how to modify it.
Sample2.xlsx Sample.xlsx