I have to workbooks and I want to populate one of them with data from the other. The receiving document has the fields Account and SubAccount which I need to match up with the account and subaccounts in the other workbook.
However, in the other workbook, the line looks like "1000 Wages 000001" (which is account, name, subaccount). I can't find out how to have my receiving document scanning the providing document and when it finds an account and subaccount (in the above string) that matches the account and subaccount in the receiving document, to bring over the data.
I have a series of of quesitons but honestly, I think it'll be answered by ONE question.
This is the my request as described below:
Bob, Jim, and Lisa are Project Managers (PM). Each PM has a Project Template Workbook with required info they need to fill out PER job. This Template workbook has a VBA button that submits their info to the PM Master File.
The PM Master file is a seperate workbook that sums up each project as filled out by the Project Template Workbook.
What I need is the code to either copy/paste the values from the template to the master file ensuring that the most recent addition of information goes to the next row and doesn't paste over the existing data.... or ... I need a different approach.
I have several hundred workbooks an am trying to write a macro to transfer data from another workbook "_TABLES.xlsm" to each of them. By using 'Record Macro' I have so far come up with -
Where "12-01-01 Results.xlsm" is the receiving book. My question is - what do I call a generic sheet so as I may drop the macro in all the other workbooks not labelled "12-01-01 Results.xlsm".
I am trying to automatically transfer data from nonadjacent cells (C1, B5,B10,B16,B22,B28) from multiple workbooks in a masterworkbook folder from A2:F2. I am a novice at VBA. I am not able to copy as Range("C1,B5,B10,B16,B22,B28") and the way it currently is coded only the last copied range (B28) is pasted to the master workbook. The data pastes to A2 in the master workbook instead of F2 where I want it. I need copying the cells from the workbooks into row 2 in the master bookbook. Here is what I currently have:
Sub LoopThroughDirectory() Dim MyFile As String Dim erow MyFile = Dir("C:ToolFolderWorkObjectives")
I have been given the following code to transfer data from multiple workbooks within folders and subfolders to retreive the same line of data from each of the workbooks and place them in a master workbook.
the folders are set up as follows,
there is a main folder, (a yearly folder) within this are 12 monthly folders (named January to December) within these are four weekly folders (named week 1 -week 4) contained within these weekly folders are the workbooks that i wish to copy data from.
for example a1 - k1
the code i am using transfers the file names but comes up with #REF! instead of transfering the data
I have created timesheets for employees that work in our shop. Our company manufactures products for different industries, such as mining, wind power generation, general industrial applications, and so forth. I modified some time sheet templates I found for excel to accommodate our company's actions. Each employee has their own workbook, in which the months are separated into different worksheets. Each sheet is divided further into weeks and in each weekly section the areas of information are divided as follows:
A / B / C / D / E / F / G / H / I / J / K / L / M Work Sector / Workshop or Fieldservice / Scope of Work / Job # / Reg or OT / Mon / Tue / Wed / Thu / Fri / Sat / Sun / Total
There are 7 workbooks (one for each employee), each with 12 sheets (one for each month). I want to create a master sheet that will pull information from everyone's timesheet if they worked on a particular job. In other words, I would like to type a job number into a cell, then have excel look through everyone's timesheets and pull over only the rows of information that contain that job number
I am looking for the code to transfer a sheet from one open workbook to another open workbook. I am just wondering what type of code I need to type so that a particular sheet from one workbook goes into a particular workbook that I desire. i.e if there were 10 workbooks open, I want a particular sheet from one workbook to be moved into one particular workbook out of these 10 sheets.
I have two workbooks with the same sheet names. One workbook is called "Main" and the other is called "Subset".
Column D in each sheet is mostly identical between the two workbooks and contains the LOOKUP references.
I would need a macro (called from the "Main" workbook) which allows the user to browse for the "Subset" workbook.
Once selected, the macro should cycle through all sheets of the "Subset" workbook and for column D values LOOK them UP in "Main" workbook and transfer the adjacent values from column C of the "Subset" workbook to column C of the "Main" workbook.
Appropriate error handlers need to be in place for:
- Selecting the appropriate workbook (i.e. one which contains identical sheet names) - The "Main" workbook is likely to contain additional sheets which should be ignored by the macro - Column D LOOKUP entries which are not found in the "Main" workbooki should be ignored (and vice-versa)
I use excel and would like to know how to copy a large volume of address data but at the same time filtering out irrelevant data placed under each other in a row, in this case, air compressors air conditioning web address etc ( see below for example). I need the first 5 lines only. The rows of unwanted data are irregular i.e some have 10 lines, others 5 , and others 2 or one line which makes using a formula difficult as there is no consistency. The data eventually need to be placed horizontally in columns to be compared to other address lists. To make matters worse, the text data has been merged and wrapped.
I have a spread with five tabs. Each tab is a person's job responsibilties for numerous properties. Each person works with a property called Orange Avenue. I want to create a tab for JUST Orange Avenue items but want it to automatically pull any and all info from each tab where that person's Ornage Avenue duties are.
I'm trying to convert this code so it transfers the data without the input box being needed.
Dim response As Long Dim strLastRow As String Dim rngC As Range Dim strToFind As Variant, FirstAddress As String Dim wSht As Worksheet Dim rngtest As String Application.ScreenUpdating = False
Set wSht = Worksheets("Transfer Sheet") strToFind = Application.InputBox("Enter Your Initials") If strToFind = False Or strToFind = "" Then Exit Sub
With ActiveSheet.Range("H2:H5000") Set rngC = .Find(what:=strToFind, LookAt:=xlWhole) If Not rngC Is Nothing Then FirstAddress = rngC.Address
Do strLastRow = Worksheets("Transfer Sheet").Range("A" & Rows.Count).End(xlUp).Row + 1 rngC.EntireRow.Copy wSht.Cells(strLastRow, 1) Set rngC = .FindNext(rngC) Loop While Not rngC Is Nothing And rngC.Address <> FirstAddress
From the attached spreadsheet I need to transfer all the rows where the issue status in column T is either ongoing or open. Now I know how to transfer them over if row 1,2,3 etc was going into row 1,2,3 etc into the new spreadsheet but as not all rows from this sheet is going over I need to now how to transfer data so in the new spreadsheet it just follows down rather than have spaces in it. i.e. if on this sheet I need to transfer data from rows 1, 5, 10, 15 on the new one they go into row 1,2,3,etc
There’s one “master table”. Two columns in master table are titled “Name-1” and “Name-2”, and all columns in front of it carry “Properties” corresponding to these names.
In a “second” table, when we choose/type the Name-1 and Name-2, corresponding properties should automatically be picked up from the master table. Is that possible?
I have a sheet with 1250 data. All are in Column "A" I want to print them out and therefore would like the data also in Column "B" and "D" in order to save printing paper and make it easier to search. Since the data is alphabetical sorted, doing it manually is a big job.
I have a new spreadsheet that I made to give us the break down of each invoice we create. what we want is to see each job that is done (by code), the amount we charge per each, the cost of goods per each, and the profit margin. In this spreadsheet I have two tabs. in tab one it has the form I made that has a place to input the data that will change with each invoice as well as a section that is broken down into columns. In these columns I have it listed this way. CA=Job code, CB=Job Description, CC=how many, CD=Charge ea., CE=rate total, CF=COGS ea., CG= COGS total, CH=profit
I have the formula done for all of the math the get the totals. My idea was to make a second tab. In tab 2 I have everything listed in columns that will go into tab one. It is broken down like this. CA=Job Code list, CB=Job Description list, CC= charge ea. CD= COGS ea.
What I want to be able to do is when I type in the job code in the first cell under the column A on tab one, it will bring over all of the info from tab 2 and put it in the right spot for that code. So if I typed in say TT001 in that cell it would bring over the description matching that code and put it in the cell under B, along with the charge in column D, and the COGS under column F. And I want it to be that way for each code I type in and it will be different each time I fill this out. How do I explain this part? Ok so I a new invoice made its # 22. I take this spread sheet and do what I want and get all the totals so I print it out. I then want to be able to clear all the info and or just type in a new set of codes that will be on invoice # 23 and then #24 etc.
So what I am saying is the codes will be different each time I fill it out. that's why I have them listed on a different tab and will just put them in tab one long enough to get the total and print it out. Is that clear as mud? I will stop here and wait and see what questions I get back.
I have a program I built and need to transfer data from a form, from workbook "C" to another workbook "W". The workbooks are open by different users . 90% of what I locate on the Web pertains to worksheets and what don't, does not work. The folders are stored in my Public Documents.
How to transfer data from one workbook that's open to another in a macro form. I included two sample data workbooks I have. Sample will have the macro inside it and will already be open for the other portion of the macro that will be running. I already have code that will open up the Sample2 file. I'm trying to take specific data from Sample and paste it into a summary sheet in Sample2. In Sample i will be cycling through roughly 30 sheets to find this data but I only included one because I just need to know the basics on how to make this work and then how to modify it.
i need the data from columns D & E on the JOKE sheet to be transferred to columns F & G on the sheet called MY PRODUCTS...
you will see that the products may have slightly different names but the product codes (column C on the joke file and column E on the my products file) are always the same.
i want to just click a button and add the data from sheet 2 tab to the columns on sheet 1 tab.
I'm trying to get my code to search through some information and transfer the data from one sheet to another. Trying to find out why my code isn't working. I keep getting errors...
I need to transfer a large amount data (~2,5 million lines of data) from one spreadsheet to another while making sure the destination file is kept in a certain format.
Spreadsheet "oxno" is the file that needs filling out with data provided to me in spreadsheet "ox" The value that is the matching criteria will be the ITS account number (Field B in "ox" and field A in "oxno") and the currency (Field B in "oxno" and field G in "ox")
So I want a macro to look in "oxno" and use field the values of field "a" & "b" and search for the them in "ox" in fields "B" & "G". Once it finds a match it should copy the value of field "I" in "ox" and paste into field "n" on "oxno".
The next data to be copied should be what goes into field "O" in "oxno" this data is derived from field "L" or "M" but only when its of numerical value with one non numerical field in it (usually a "/"). Last value that I need copied over is Field "T" on "oxno" this is derived from field "J" or "M".
I realise the potential conflict because two sets of queries will be looking to gather values from field "M" on "ox". That is why I am hoping when we look for value for field "O" in "oxno" we only look for numbers with one non numerical field in it (usually a "/") .
After finishing writing this up, I realise how wordy this has become appologies for that, but hopefully someone will be able to understand what I am looking to achieve and will be able to suggest a solution.
on the "all data" sheet, there are two rows that have a Y for file missing - these are to be marked, so that they may be focused on finding their file
currently, i am doing as such and then filtering by that column to print out a list, and would like a simplified solution (populate sheet "missing") with just those rows who have missing files - so that another user may easily view such data without having to fondle around with the master list
I have two worksheets one that has a weekly schedule and sheet2 (daily attendance) where i want to transfer One day at a time but i only need the Job role,employee name and shift for that day, then i need to do the same for each day but i don't want seven sheets. please find attached an example sheet.
I am trying to transpher data between two userform.
The Idear, To store information within a list box on a userform and select what list items "information" is to be copyied to another useform's Textbox.
To have the 1st userform with a Text Box and one Button. When the user click the button the userform containing the listbox " information" is displayed. On this form the user can select an item "Information" that they want to be transphered into the other useform's textbox. (any information that is going into the textbox must only be added to the textbox information as a new line)
i need your help by a code to transfer the data mentioned in ( main ) sheet ( in attached file ) to the ( 8 agents ) sheets which addressed (A,B,C,D,E,F,G,H) ( in same cells for easy using the code ).
I have a spreadsheet called DATA1 that has code in 3 cells B2, D2, F2.
I want a peace of code that will allow me to transfer this data when I click a macro button (Lets call the button "transfer") to another spreadsheet call SALES1.
to do this it has to open the cell and place the data in the same cells on sheet1 of sales
I have 3 worksheets- Sheet 1 and Sheet 2 will have data from the customer that I need to transfer in Sheet 3 as a summary. So if 5 rows are filled in Sheet 1 and 6 rows in sheet 2, VBA code that can transfer data from sheet 1 and sheet 2 to sheet 3 all one after other (i.e. have 11 rows total). The current code formula i have just replaces data that was filled in from sheet 1 to sheet 2.
I am trying to transfer data from two different spreadsheets where their data has common column titles and then transfer it to a Master spreadsheet. These two spreadsheets will have different filenames most of the time. If the first spreadsheet has a new data, then it needs to be transferred to master spreadsheet and when the other shpreadsheet has a new data, it will be added to the mast template as well. The problem is those two spreadsheets always change their filenames. How can I have a macro that will rely on the columns instead where data resides and transfer it to master template?
What I am trying to achieve is like two buckets with water (two spreadsheets wth some common columns) and their water will be transferred to a big water drum (master spreadsheet). For now, what I'm doing is always copy and paste data to the master spreadsheet and it takes me forever to do it one by one.
I don't know if I can attach my spreadsheets here so I only put the link for pictures [URL] ........
This is what I have:
Sub UpdateFromTable1And2() Dim sFileName(1 To 2) As String ' List of file names Dim nFile As Long ' Index for file name list Dim wb As Workbook ' Opened workbook Dim ws As Worksheet ' Worksheets("Combined") in this workbook
