I have an existing code that runs almost flawlessly but I am running in to formatting cells error (or at least I think that is the problem).
For example, here is a line of code where my error lies:
If Worksheets(FirstSheet).Cells(Counter, ColtoMove) = MoveIf Then
'DO SOME ACTION
If I put my cursor on MoveIf it shows the expect number of 4500016239…….BUT it errors!
When I step through the code and go to the worksheet (or go to the left side of the = in the above code the data in the cell is “4.5E+09“.
I’ve attempted to change the formatting of this cell range to “Text” by the following With statement:
With Worksheets("CreateOrderFormsData")
.Range("AC:AC").NumberFormat = "Text"
End With
Note: if I verify the cells formatting after the above code is ran by rt click on the cell, format cells the Number field is set to “CUSTOM” and the Type: field is set to “TEXT”. Is this the problem? Please read on.
But that did not seem to do the trick…..actually if I now go to the left of the = again (which is now set to text) the data is “###########” in the cell, in the formula bar the number is the expected 4500016239 though but the CODE STILL FAILS!
Am I on the right track…..can anyone assist with this error please?
How to assign a variable of type Long to the below code.
1) Dim searchField as LOng ActiveSheet.Range("N2").FormulaArray = "=MAX(IF($A$2:$A$200=""" & searchField & """,$C$2:C$200))"
2) ActiveSheet.Range("N2").FormulaArray = "=MAX(IF($A$2:$A$200= searchField,$C$2:C$200))" 1) code failed because I want the variable searchField to have a data type of LONG.
2) code failed because it seems like excel thought the search criteria is of same searchField.
How to convert date to general format and store it in a variable of data type Long. I.E if I convert 3/15/2008(data type of Date) to data type of General, it should be 39522. What is the VBA code for doing this conversion?
The following codes publish the worksheets "Estimate" & "Photos" to a PDF file, it all works great accept that the sheets remain selected in the WB after the sheets have been published. How do I unselect the estimate and photos sheets?
Sub CombineWBs() Dim wb As Workbook Dim newWB As Workbook Dim i As Long
On Error Resume Next
With Application.FileSearch .NewSearch .LookIn = "C:Budget" .Execute Set wb = Workbooks.Open(.FoundFiles(1)) RenameWS wb wb.Worksheets.Copy Set newWB = ActiveWorkbook wb.Close SaveChanges:=False For i = 2 To .FoundFiles.Count Set wb = Workbooks.Open(.FoundFiles(i)) RenameWS wb wb.Worksheets.Copy After:=newWB.Worksheets(newWB.Worksheets.Count)
My code works well if the worksheet name is Sheet1. It will change constantly. I have alot of other similar workbooks that are not affected and cannot figure this out. Here is the code that I get the error at: ....
I have a workbook which includes a simple set of options on closing such as selecting the front sheet, restoring scrollbars and saving the workbook. To avoid problems with subscripts out of range I am using the ThisWorkbook statement to close the workbook.
This works fine and causes the workbook to close when close is clicked on any excel window. The problem is that excel falls over when it tries to resume closing the other workbooks. I am given (ironically) an error saying "excel has encountered a problem and needs to close". Does anyone know how to work around this?
My code is below:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Call Toolbars9(True) With ActiveWindow .DisplayHorizontalScrollBar = True .DisplayWorkbookTabs = True End With
i would like an if macro to pick up if cell dest (i have used a case to define this cell) contains an error or more imoprtantly #REF! then change the offending cells to 0 and put up a message box to put "Check XTA". i have found some that i think may work but i didnt understand them (they had function in them :smask so i couldnt put them in.is there a way to put them in with out functions or could someone point me in the right direction.
how to supress the continue,end,debug, message when there is a vba error. The idea being that if there is a bug in my system that I have no realised, I don't want my end user seeing that message! I would preferrable design my own error message to appear instead.
I have a rather large workbook (30 sheets, 10MB) that has one worksheet with many INDIRECT functions in it (pulling data from the same file, different tabs). I am working to put simple code into the workbook to protect and/or unprotect all worksheets. I have gotten code to work to both protect and unprotect all the sheets, but when I run the unprotect code (see below), and then I go to edit the workbook, data from the sheet with many "indirect" functions temporarily "overwrites" the data on the active sheet (this is fixed when I scroll my mouse over the effected cells). I am developing this workbook for other users, so I'd like to fix this before sending it off to them.
This problem does not happen until after I run the following .....
I have added this bit of code to change the apperance of entered time from 0835 to 08:35
UserInput = Target.Value If UserInput > 1 Then NewInput = Left(UserInput, Len(UserInput) - 2) & ":" & Right(UserInput, 2) Application.EnableEvents = False Target = NewInput Application.EnableEvents = True End If
And it works like a charm. Except that if the content in one of the cells later is deleted a "Run time error 13" is the result. Debug leeds to the line "If Userinput >1 Then"
I used the code below for Conditional Formatting. This works fine but the VBA-code crashes when I delete more than one selected cell. Is there a simple modification possible to prevent this from happening?
Private Sub Worksheet_Change(ByVal Target As Range) Dim icolor As Integer If Not Intersect(Target, Range("A1:C250")) Is Nothing Then Select Case Target Case 1 icolor = 6 Case 2 icolor = 12 Case 3 icolor = 7 Case 4 icolor = 53 Case 5 icolor = 15 Case 6 icolor = 42 Case Else 'Whatever End Select
Target.Interior.ColorIndex = icolor End If End Sub
I copied the sheet and redid the format. I renamed the original dashboard sheet from count to "keep" and named the copy after the original "count" Everything still works great - until i either hide or delete the original count which is now named "keep". I get an error at the red colored line below ".publish false".
I have a list of customers in listbox1 (the text values of which come from a spreadsheet), that I want to refine as I type in textbox1. I'm not sure if it's possilbe, but I would like it to work similar to the itunes search (if you're familiar with it) where it searchs for any occurance of the text within the list as opposed to just searching for the letters at the beginning of the word.
while the code works fine by itself in the sample file, when inserted into my other file which contains another set of algorithms, it generates a run time error '13' type mismatch whenever the 'Hide' button is clicked.
this line of the following function: b = x / tpi
Function range(x) tpi = 2 * 3.1415927 b = x / tpi a = tpi * (b - Int(b)) If (a < 0) Then a = tpi + a range = a End Function
im making this macro code for my cell that will have a conditional formula but im always getting an error pop up message: TYPE MISMATCH.
here is my code
Sub ACCOUNTFINDERCODE() Dim LastRow5 As Long LastRow5 = Columns(7).Find("*", searchdirection:=xlPrevious).Row
If Sheets("working file").Range("g11:g" & LastRow5) = "F1212014000" Then Sheets("working file").Range("k11:k" & LastRow5) = "='Account LookupSheet'!R4C3" End If
If Sheets("working file").Range("g11:g" & LastRow5) = "F1212015000" Then Sheets("working file").Range("k11:k" & LastRow5) = "='Account LookupSheet'!R5C3" End If
I'm using a CALL Macro to split up a HUGE macro into different pieces:
Code: Sub RSLDASHBOARDV2() 'Macro recorded 12/14/2010 by Ryan R. Koleno, Pharm.D. 'Last Updated 7/10/12 by Ryan R. Koleno, Pharm.D. 'Do Not Modify Code Unless Given Proper Privileges to do so. Dim APPSPD As Worksheet With Application .ScreenUpdating = False .Calculation = xlCalculationManual
[code]...
The first few macros dealing with page setup and what not work fine but when it hits the Pivot table code for the STATSPIVOT macro it errors out stating: "Run-time error '1004': Unable to get the PivotItems property of PivotField class' at this point in the code:
Code: objField2.PivotItems( _ "TRC").Position = 1 objField.PivotItems( _ "MEDCO MAIL OR AOB").Position = 2
When this macro is not split up it worked fine as written. Am I overlooking something in the Call Macro's code or is there a variable I'm not aware of. I have included the Pivot Table code that errors out as well.
Code: Sub STATSPIVOT() 'STATS PAGE BASED ON STATS DATA TAB Sheets("STATS DATA").Select Dim objTable As PivotTable, objField As PivotField ActiveWorkbook.Sheets("STATS DATA").Select Range("A1").Select
I have a file with over 20,000 rows that contain a date (Mon~Sun), What I need to do is remove every day that contains Mon~Sat and only keep Sun, this is the code that I have come up with and is working.
Code: Dim c As Range Dim SrchRng Set SrchRng = ActiveSheet.Range("A1", ActiveSheet.Range("A" & Lastrow).End(xlUp))3
I need a formula that will bring up the Model type of a product based on its Material code. All the models I need to generate have a "root" number in them (the first 6 digits define model type). This is what I need to fill out:
1. Is there a VBA Function equivalent to the FIND() function, If so What is it? 2. Let's say Im Putting a Date into a inputbox, what is the type # for date (Type:=?)??
I have just been told that one of our servers is being replaced this weekend. I have thousands of hyperlinks in excel docs that reference this server. Other than manually reestablishing the links one by one to the new server, is there a way to do some kind of global change to replace the old server name with the new server name?
These are not hyperlink formulas, but rather Insert>>Hyperlink.
Or, is there a way to convert these hyperlinks to hyperlink formulas that would omit reference to the server and thus not be broken during the conversion?
Grasping at straws because I cannot envision having to relink these one by one.
I have a worksheet with values in yen in the C column. My boss (who will not get it through her head that I am not a programmer) wants a macro that will take a yen/$ conversion rate (e.g., 88 yen/$) in cell J1 and convert all the amounts in column C into dollars with a 5% markup and rounding up. If I was doing this as a worksheet calculation rather than a macro, the calculation would look like this:
If I have a scoring grade for different categories (8 in total) & the grades looks something like that: 1a=500, 1b=400, 1c=300, 2a= 250, 2b=210...& so on till 4c, but with different numbers for each category.
I need to come up with a total score of points if a person is given a certain grade from the above. ex. if they scored 2a on a certain category, 1c on another & with all the rest of 8 categories scored. The number i need to come up with is the total points.
I am working on a sheet that logs sales enquiries and quotations. The quotations may be made in either Dollars, Euros or Pounds. However, I want the 'reporting' column to be Pounds. I would appreciate any advice on the simplest way of achieving this.
Imagine column A is dollars, column B is Euros and column C is pounds. Most of the time the quotations are done in pounds and the other two columns will be blank. Also, there will only ever be one figure quoted per row. Would it be easier to create a fourth column (D) to consolidate the three separate figures together? We are using fixed exchange rates for the year, so to convert to pounds we will multiply any dollar quotations by 0.5 and any euro quotations will be multiplied by 0.69.
I have two sets of data that I need which is obtained from one source.
Basically, the stats I am working with in excel are Processing Time (minutes/seconds) and Volume Per Hour. I desperately need a formula that will allow me to convert the processing time into Volume per hour.
Example: Average Handle Time, 7min 7 seconds = x per hour. If it was just 7 minutes flat I could simply divide that into 60. I also can't make it 7.7 and divide that because 7.7 doesn't equal 7m7s.
Does anyone have any thoughts on a way to do this? I found a conversion chart online that allowed me to do this work manually 'Conversion Chart: Fraction of an Hour to Minutes', but I haven't determined a way to make a formula out of this.
I have an spreadsheet that is monitoring the productivity of agents, as well as the time that it takes to complete each task. My workforce keeps time as .50 = 30 minutes. So 7 and half hours is actually 7.5. Agents are putting the actual time of it took such as 15 minutes however I would like to insert a formula that will convert this for me manually. I know I could give them a conversion sheet, but it took quite a while to get them to actually be able to work in excel. So I would like to add this formula.
I am trying to convert numbers from three cells into a date in one cell. I tried using the =DATE function, but it did not work. In A1, B1, C1, I have 1, 15, 2002. I would like cell D1 to take the info from the preceeding three cells and display "January 15, 2002"
Presently, I have A1...C1 formatted for "General." D1 is formatted for "Date." Yet I get the answer "August 23, 1907" (or 2792 as 'General').
