Sheet Event Code Errors If Target Deleted
Mar 25, 2008
I have added this bit of code to change the apperance of entered time from 0835 to 08:35
UserInput = Target.Value
If UserInput > 1 Then
NewInput = Left(UserInput, Len(UserInput) - 2) & ":" & Right(UserInput, 2)
Application.EnableEvents = False
Target = NewInput
Application.EnableEvents = True
End If
And it works like a charm. Except that if the content in one of the cells later is deleted a "Run time error 13" is the result. Debug leeds to the line "If Userinput >1 Then"
Can this error be avoided..?
View 3 Replies
ADVERTISEMENT
Apr 15, 2008
I used the code below for Conditional Formatting. This works fine but the VBA-code crashes when I delete more than one selected cell. Is there a simple modification possible to prevent this from happening?
Private Sub Worksheet_Change(ByVal Target As Range)
Dim icolor As Integer
If Not Intersect(Target, Range("A1:C250")) Is Nothing Then
Select Case Target
Case 1
icolor = 6
Case 2
icolor = 12
Case 3
icolor = 7
Case 4
icolor = 53
Case 5
icolor = 15
Case 6
icolor = 42
Case Else
'Whatever
End Select
Target.Interior.ColorIndex = icolor
End If
End Sub
View 3 Replies
View Related
Oct 14, 2007
I copied the sheet and redid the format. I renamed the original dashboard sheet from count to "keep" and named the copy after the original "count" Everything still works great - until i either hide or delete the original count which is now named "keep". I get an error at the red colored line below ".publish false".
I have attached an image of the error....
View 7 Replies
View Related
Mar 27, 2009
Is there a way to write a Worksheet_SelectionChange (ByVal Target As Range) event in module after creating a sheet in VBA? I constantly delete a sheet, then repopulate it with a new one that is empty, but I need to add some code that happens if they should change a particular cell. It worked when I ran it on a worksheet without refreshing, but as soon as I cleared and repopulated the sheet, it was gone. Is there a way to preserve this?
View 9 Replies
View Related
Oct 20, 2008
I have a workbook with 20+ sheets in it, I add sheets and delete sheets on a daily basis, except for one sheet that is like my summary sheet.
Is there a code, formula, or magic spell that will list the names of the sheets that I have deleted? For instance, if my workbook has 50 sheets and I delete 49 of them, I want to see cells A1 thru A49 (or where ever I wish to place them) filled with the names of the sheets I just deleted.
View 9 Replies
View Related
Mar 27, 2008
what do people meen when they say target and how is it used from what i can gather its somthing to do with the active cell?
View 9 Replies
View Related
Jan 20, 2014
I'm trying to run a macro anytime cells G2, J2, M2, O2, P2, S2, V2, Y2, AB2, AE2, AH2, AK2, AN2, AQ2 change.
Right now I have the below code which is working well, but I only have it set for G2. Do you know what the notation is to make the target range multiple cells?
Also, I use the xlDown command in my sorting code, but later on it reverts back to "A5:AT60"... is there any way I can remove these specific cell references? I want to avoid having to re-write the macro every time my selection shrinks or expands.
Code:
Private Sub Worksheet_Change(ByVal Target As Range) If Not Intersect(Target, Range("G2")) Is Nothing Then
Rows("5:5").Select
[Code]....
View 3 Replies
View Related
May 23, 2007
I need to hide/unhide a couple of rows based on the result of a formula in the Target Range. Basically, Cell D2 contains the results of a sum (a+ B), if this is greater than 10,000, unhide the next row.
View 9 Replies
View Related
Nov 6, 2006
Below is an example from the ozgrid forum illustrating the worksheet change event. Not sure of the meaning of 'Do nothing if more than one cell is changed" on the 2nd row of the code. Does it means that if a value is entered in other cells, the code will not fire?
Private Sub Worksheet_Change(ByVal Target As Range)
'Do nothing if more than one cell is changed or content deleted
If Target.Cells.Count > 1 Or IsEmpty(Target) Then Exit Sub
If Target.Address = "$A$1" Then
'Ensure target is a number before multiplying by 2
If IsNumeric(Target) Then
'Stop any possible runtime errors and halting code
On Error Resume Next
'Turn off ALL events so the Target * 2 does not _
put the code into a loop.
Application.EnableEvents = False
Target = Target * 2
'Turn events back on
Application.EnableEvents = True
'Allow run time errors again
On Error Goto 0
End If
End If
End Sub
View 2 Replies
View Related
Sep 9, 2007
I'm trying to create a sheet where clicking in a range brings up, in my users words, "a box I can type loads of comments in". They want some kind of flag in this cell showing if comments are posted or not. So far so ok, got the userform to pop up using the selection change event below and dump the actual comments somewhere the user won't look. A rather inelegant IF statement to see if there's anything in the dump cell gives them their flag.
Private Sub Worksheet_SelectionChange(ByVal Target As Excel.Range)
If Intersect(Target, Range("B2:B300")) Is Nothing Then Exit Sub
UserForm1.TextBox1.Value = ActiveCell.Offset(0, 10).Value
UserForm1.show
End Sub
So what's the problem? When I select entire rows, the userform pops up. Is this unavoidable?
View 2 Replies
View Related
Jul 24, 2009
I'm making a macro to show or hide rows depending on whether or not a checkbox is checked. I'm using Wingdings font checkboxes, not actual form controls. The question: My macro can't find the last row of the used range on the sheet. This is in the sheet's code, set to fire when the selection changes.
Normally the line in blue works just fine, but it's not working here. In the attached workbook, the macro thinks the last used row is row 19, when it's actually row 21. What's going on?
View 2 Replies
View Related
Jun 27, 2008
why this code does not work when the worksheet is changed between range "B1:F5"?
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Intersect(Target, Range("B1:F5")) Is Nothing Then
With Range("B1:F5")
Cells(Target.Row, 7) = Cells(Target.Row, 6).Value + Cells(Target.Row, 5).Value
End With
End If
End Sub
View 3 Replies
View Related
May 29, 2008
I have found that this only works on the sheet being viewed, how can I make it work on a different sheet than the one that I am on?
Option Explicit
Private Sub Worksheet_Calculate()
If Range("C1").Value = "5" Then
ActiveSheet.Shapes("rectangle 1").Visible = True
Else
ActiveSheet.Shapes("rectangle 1").Visible = False
End If
End Sub
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
View 8 Replies
View Related
Dec 5, 2008
Private Sub Worksheet_Change(ByVal Target As Range)
If Not Application.Intersect(Target, Me.Range("R1C1")) Is Nothing Then
'do something
End If
End Sub
Now, that Private Sub works fine if you change the value of R1C1 manually or from another macro.
But if R1C1 is the cell linked to a list box, nothing will happen if you change its value by selecting different items in the list box.
View 4 Replies
View Related
Jan 27, 2009
I use excel 2002 but some of my office are on 97, i want to add a small workbook open event code which works for me but debugs for the others?? The code is basically, go to a tab, on that tab and that range sort..
View 2 Replies
View Related
Jun 2, 2013
I have this code that removes a group of cells on any row that contains "Y" in Column L, but it does not move the remaining group of cells on a row up after the cells are deleted.
VB code so that when a range of cells are deleted, the row(s) below are moved up?
Sub RemoveReceived()
LastRow = Cells(Rows.Count, "H").End(xlUp).Row 'change "H" to the column that determines which is the last row
For x = LastRow To 4 Step -1 'assuming it starts from row 4
If Cells(x, "L") = "Y" Then
Range("H" & x & ":K" & x).ClearContents ' or use Delete
[Code] ........
View 2 Replies
View Related
Sep 5, 2007
I have an existing code that runs almost flawlessly but I am running in to formatting cells error (or at least I think that is the problem).
For example, here is a line of code where my error lies:
If Worksheets(FirstSheet).Cells(Counter, ColtoMove) = MoveIf Then
'DO SOME ACTION
If I put my cursor on MoveIf it shows the expect number of 4500016239…….BUT it errors!
When I step through the code and go to the worksheet (or go to the left side of the = in the above code the data in the cell is “4.5E+09“.
I’ve attempted to change the formatting of this cell range to “Text” by the following With statement:
With Worksheets("CreateOrderFormsData")
.Range("AC:AC").NumberFormat = "Text"
End With
Note: if I verify the cells formatting after the above code is ran by rt click on the cell, format cells the Number field is set to “CUSTOM” and the Type: field is set to “TEXT”. Is this the problem? Please read on.
But that did not seem to do the trick…..actually if I now go to the left of the = again (which is now set to text) the data is “###########” in the cell, in the formula bar the number is the expected 4500016239 though but the CODE STILL FAILS!
Am I on the right track…..can anyone assist with this error please?
View 9 Replies
View Related
Jan 26, 2008
Sub CombineWBs()
Dim wb As Workbook
Dim newWB As Workbook
Dim i As Long
On Error Resume Next
With Application.FileSearch
.NewSearch
.LookIn = "C:Budget"
.Execute
Set wb = Workbooks.Open(.FoundFiles(1))
RenameWS wb
wb.Worksheets.Copy
Set newWB = ActiveWorkbook
wb.Close SaveChanges:=False
For i = 2 To .FoundFiles.Count
Set wb = Workbooks.Open(.FoundFiles(i))
RenameWS wb
wb.Worksheets.Copy After:=newWB.Worksheets(newWB.Worksheets.Count)
View 9 Replies
View Related
Jan 16, 2008
This piece of code copies cell info from column A into cell B1 only when cursor 'scrolls' on Col. A
How can i modify the code so that it copies into cell B1 when cursor scrolls up/down regardless of col.?
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
If Selection.Cells.Count = 1 Then
If Target.Column = 1 And Target.Value "" Then
Range("b1").Value = Target.Value
End If
End If
End Sub
View 9 Replies
View Related
Nov 27, 2008
I require the following part of the code to target 2 cells G10 and N536
i guess this is simple but just not sure how it will work
Case Target.Address = "$G$10"
If Not IsDate(Target.Value) Then Exit Sub
Dim DateSuffix As String
Select Case Day(Target.Value)
Case 1, 21, 31
DateSuffix = "st"
Case 2, 22
DateSuffix = "nd"
Case 3, 23
DateSuffix = "rd"
Case 4 To 30
DateSuffix = "th"
End Select
Application.EnableEvents = False
Target.Value = Format(Target.Value, "d") & DateSuffix & Format(Target.Value, " mmmm, yyyy")
Application.EnableEvents = True
End Select
View 9 Replies
View Related
Oct 15, 2008
My code works well if the worksheet name is Sheet1. It will change constantly. I have alot of other similar workbooks that are not affected and cannot figure this out. Here is the code that I get the error at: ....
View 9 Replies
View Related
Nov 21, 2006
I have a workbook which includes a simple set of options on closing such as selecting the front sheet, restoring scrollbars and saving the workbook. To avoid problems with subscripts out of range I am using the ThisWorkbook statement to close the workbook.
This works fine and causes the workbook to close when close is clicked on any excel window. The problem is that excel falls over when it tries to resume closing the other workbooks. I am given (ironically) an error saying "excel has encountered a problem and needs to close". Does anyone know how to work around this?
My code is below:
Private Sub Workbook_BeforeClose(Cancel As Boolean)
Call Toolbars9(True)
With ActiveWindow
.DisplayHorizontalScrollBar = True
.DisplayWorkbookTabs = True
End With
View 8 Replies
View Related
Mar 6, 2008
i would like an if macro to pick up if cell dest (i have used a case to define this cell) contains an error or more imoprtantly #REF! then change the offending cells to 0 and put up a message box to put "Check XTA". i have found some that i think may work but i didnt understand them (they had function in them :smask so i couldnt put them in.is there a way to put them in with out functions or could someone point me in the right direction.
View 4 Replies
View Related
May 9, 2008
how to supress the continue,end,debug, message when there is a vba error. The idea being that if there is a bug in my system that I have no realised, I don't want my end user seeing that message! I would preferrable design my own error message to appear instead.
View 2 Replies
View Related
Sep 18, 2007
I have a sheet (sheet2) that has cells in column L, M and N referencing cells in another sheet (sheet1)(same workbook).
If I delete a row out of Sheet1 it causes the formula in Sheet2 to go to #REF.
Normally the formula would be something like
='Sheet1'!L13
How can I get these formulas to not change just because cells where deleted from Sheet1?
View 9 Replies
View Related
Jun 15, 2012
I have this piece of Code which I am trying to tweak;
Code:
If Target.Offset(0, 1) = "" Then
Target.Offset(0, 1).Activate
Add: Rspn = InputBox("Please enter the Colour Code for " & Target.Value, "Validating Data Integrity")
[Code] .......
What happens is that the user Enters a Color, say Copper, then an Input Box appears with a message:
Please enter the Color Code for Copper. What I would like to achieve is to have the word Copper displayed in Quotes. i.e. "Copper".
View 4 Replies
View Related
Jun 17, 2012
I would like to add one more "And" to the code below: If Target is in Column M
[code] If Target "" And Range("B1") = 1 Then[/code)
View 3 Replies
View Related
Nov 30, 2009
I have a rather large workbook (30 sheets, 10MB) that has one worksheet with many INDIRECT functions in it (pulling data from the same file, different tabs). I am working to put simple code into the workbook to protect and/or unprotect all worksheets. I have gotten code to work to both protect and unprotect all the sheets, but when I run the unprotect code (see below), and then I go to edit the workbook, data from the sheet with many "indirect" functions temporarily "overwrites" the data on the active sheet (this is fixed when I scroll my mouse over the effected cells). I am developing this workbook for other users, so I'd like to fix this before sending it off to them.
This problem does not happen until after I run the following .....
View 14 Replies
View Related
Jul 15, 2014
the following two statements return the error "Application-defined or object-defined error"
Code:
Sheets("Purchase").Range("PurchaseTax").FormulaR1C1 = "=IF(RC[-1]0,ROUND(RC[-1]/11,2),"")"
Sheets("Purchase").Range("FreightTax").Formula = "=IF(FreightCharge0,ROUND(FreightCharge/11,2),"")"
View 2 Replies
View Related
Oct 22, 2013
When ever I update my external CSV file and hit refresh all data, I get #REF! Errors. The CSV file has a table that changes daily. Thus the "A" Column has a different number of rows depending on the day. The problem is that Monday the CSV file will contain 700 Rows, while on Friday it will have 200 Rows. I end up with a lot of #REF! Errors friday. How do I write the code so that (A561 for example) does not change regardless if it can reference the target cell or not? I even thought of making a macro that just copied the formula into all of the cells after each refresh, but there must be a better way.
Example code
=IF(A561>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O561,calculation!O561),"")
=IF(#REF!>0,IF(Start!$H$2="Monday",'calculations-mon-sat'!O567,calculation!O567),"")
View 2 Replies
View Related
