I use these and related functions (Format, Right$ etc) in my VBA code. Works perfectly on my machine, butwhen a colleague opens the sheet I get repeated compile errors - "Can't find project or library". I have checked all the references and tey are all there, so much scratching of head.
View 9 RepliesI need to return the text from a string, in a similar way to they way LEFT/ RIGHT would do.
I have some text in a cell, say A1 that looks like this ->
TEXT BEGIN --- TEXT NOW ENDS
I want to return everything before / after the --- symbols.
Cell A1 = 78-36
This is a win/loss ratio so to have it as a percentage I would have to divide the first number by the sum of the two numbers so 78/114 = 68.4% How would you do this with a formula?
I came up with this that isn't quite right, because RIGHT and FIND don't work together.
=LEFT(A1,FIND("-",A1,1)-1)/(LEFT(A1,FIND("-",A1,1)-1)+RIGHT(A1,FIND("-",A1,1)-1))
There must be a smarter way of doing this. TY
I have a usferform where I want the result from textbox1 displayed in the cell as all caps.
here is what I tried but not effective.
If UserForm7.CheckBox5 = True Then Range("A23") = UserForm7.UCase(TextBox1.Value) & " SPECIAL EVENT RENTAL"
I've been given a new version of a spreadsheet. When I press the recalculate button the macro runs but errors with a
Compile Error:
Can't find project or library
at this code point
Function ConvertYesNo(YesNo As String) As Integer
ConvertYesNo = 0
If UCase(YesNo) = "YES" Or UCase(YesNo) = "Y" Then
ConvertYesNo = 1
End If
End Function
the code at this code point seems to be exactly the same as the old sheet according to vdiff. Is there something that might need turning on or off.
I can open the old sheet at the same time and this runs fine without hassle.
Unfortunately I have 150 sheets to edit and I don't want to go and paste them all in to the old sheet and use its recalclaution function so thought someone might be able to cast some joy on the matter.
Macro security is low, file is saved onto hard disk, no read only epermissions.
i have a form that i have 2 fields that need to be capatalized at all times - B6 and G6 I have used this formula to get B6 to work but for the life of me i cant get BOTH to work and the same time.
here is the formula
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Set Target = Range("B6") 'change to your range
If Not IsEmpty(Target) Then
Target = UCase(Target.Text)
End If
End Sub
I have a 2010 excel sheet containing 14 columns and 45082 rows in total. I am quite illiterate when it comes to writing macros but I know that what I need can be achieved with a set of codes.
To be more clear, I inserted two tables below. The first one represents the current data structure, and the second one is the way I want my data to look like.
Current data structure looks like
Variable 1
Variable 2
Variable 3
[Code].....
I am having trouble filling a formulae series to the left on one spreadsheet, the fomulae being references to another sheet.
For example, I have two sheets 'Mtce Options' and 'Base Case'. In 'Mtce Options' I have the following formulae
A B C
1='Base Case'!A15='Base Case'!D15='Base Case'!G15
I want to fill to the left, incrementing the column references by a factor of 2 each time, eg. next two should be ='Base Case'!J15 and ='Base Case'!M15.
However, if I autofill to the left by highlighting A1, B1 and C1 or just B1 and C1 all I get is an inappropriate reference such as ='Base Case'!D15 or ='Base Case'!F15, respectively, in D15.
I want to grab everything left of the last occurrence of "." in a string, and in the next cell everything right of the last occurrence of "."
so say the string is 111.111.1.222
column 1
111.111.1
column 2
222
my current code (which works, but its messy) for the first cell is
As you can see in the example below, in column B I have a list of vendor names, some of which are similar but not identical. (For Example, in one instance a vendor will be called "Ford Motor Co.", while in another it will be called "Ford Motor Inc.".
I need to populate column C, which at every instance where two plants (listed in column A) have similar vendor names in Column B, a universal name will be assigned and recorded in column C for each of the similar names.
HOpefully it is clear as shown below.......
As you can see in the example below, in column B I have a list of vendor names, some of which are similar but not identical. (For Example, in one instance a vendor will be called "Ford Motor Co.", while in another it will be called "Ford Motor Inc.".
I need to populate column C, which at every instance where two plants (listed in column A) have similar vendor names in Column B, a universal name will be assigned and recorded in column C for each of the similar names.
HOpefully it is clear as shown below.......
I have created a sheet that contains a new diet program, calculated down to the precise calorie required for my training routine. Please see below for an example of one of my daily meals:
[url]
I need a formula that will help me to create a weekly shopping list (as the values in the example above will change on a regular basis). So I need to take all values from the from columns A & B, multiply them by 5 and then show me the totals in another sheet.
Similarly, I need to do the same with columns E & F, only they need to be multiplied by 2. The totals then need to be added to give me the required amount (in grams) for the week.
=ISNUMBER(MATCH(X1,A:A,0)) where X1 is cell you are checking for a match to check and see if there are duplicates in 2 rows. Is there anyway to check to see if a cell contains a string of numbers. Example: Cell A1 has 0000402502LK and Cell A2 has 402502. Is there anyway to get this to show up as true since the 402502 in contained in the string in A1?
View 2 Replies View RelatedI want to delete rows that are a subset of any other row. Not manually, as there are thousands of rows. For example, in the attached file, row 4 is a subset of row 5 (also row 12 of row 13, row 14 of row 15, and both rows 21 and 22 of row 23).
View 2 Replies View RelatedI have a large spreadsheet where some data are similar. for Example
Robert $1000
Louis $600
Glen $350
Doreen $2300
Robert $500
Louis $600
Glen $750
Doreen $300
Robert $3000
I want to merge all Robert together, all Louis together and show as one Robert $4500. How can I do that ? Should I use a Look up.
I have the following seven codes used to fill a ListBox with data retrieved form a range (DACNRange).. they are almost the same .. the only difference between them is the range column number (highlighted with red). Instead of these seven similar codes, Can we create a general code replaces them all?
View 2 Replies View RelatedHow to combine cells with a similar value inside them into a single cell. Here is what my data looks like.
10'X14'{&}SNM8981-1014{&}16
2'6"X10'{&}SNM8981-2610{&}9
4'X6'{&}SNM8981-46{&}6
[Code]....
For example, I need to have every cell with SNM9012 to combine into the same cell. If I could figure this out it would save me hours vs pasting the similar lines into textmate and removing the enters.
When you filter a spreadsheet, you can find results that are similar to a condition. I have families of products that share a common 3 digits, but the rest of the model number is different. The 3 similar digits could be the first 3 digits, or it could be 3 digits starting with the 2nd digit. This spreadsheet has each complete model number on its own row. In that row is a number that represents a volume. I want to be able to sum the volume column if the model number contains the 3 digits.Model Number
Volume
A hat
5
B hat
1
A glove
4
hat
8
In the above example, the total for "hat" = 5 + 1 + 8 = 14
I would type in a condition (family name) into another cell (D1) and the formula in D2.
I have an excel grid which have 2 sheets, sheet2 have all the data, I am doing a macro which based on a value that I put in sheet1 is supposed to find Items which have similar value +/-3 from sheet1. I made a code which I posted below, I don't have any error message but it doesn't work as it should. I explain you with an example: If in the data grid I have the following values
11.8
67.0
25.5
18.1
13.0
if the value I look for is 12 +/-3, it doesn't find anything.
if the value I look for is 11 +/-3, it finds 11.8 but not 13,
if the value I look for is 20 +/-3, it finds 18.1,
if the value I look for is 23 +/-3, it finds 25.5,
Here is my code:
Sheet1.Cells(1, 3).Select
Dim Amin As String, Amax As String ', Bmin As String, Bmax As String
Amin = Sheet1.Cells(3, 2).Value - 3
[Code].....
Problem is Findstring finds cells that contain "SS1" AND "SS1 EXT". These are separate grades.
I need Findstring to only find SS1. Using xlWhole doesn't work for me, as the cells also contain other data. For example: " SS1 48 /"
CODE:
FindString = "SS1"
Findstring1 = "SS1 EXT"
With Sheets("Sheet1").Range(Rng4)
Set Rng = .Find(What:=FindString, _
After:=.Cells(.Cells.Count), _
[Code] ........
This is probably a simple question, but one I can't figure out after several hours. I am creating a spreadsheet focused on certifications.
I need to take the date each initial certification was achieved, and add x years to each cert, which is simple enough.
The sticky part is that the (date + x years) can't logically be a weekend; if it is, I need to subtract one or two days from the result, so that it's the *weekday* immediately prior.
e.g. if my initial certification date is: 1/23/2006 and my certifcation expires in four 4 years:
A47= date(2006,1,23)
h47= 10
=DATE(YEAR(A47)+H47,MONTH(A47),DAY(A47))
Result = Saturday, January 23, 2010
If the result is a Saturday or Sunday, I need to subtract one or two days from the date. In this example, I'd like: Friday, January 22, 2010 as the result.
I've been playing with 'if', et. al., to no avail.
I am after a control similar to the Properties one in the VBE. The one where you modify properties for a control in design mode.
Does anybody know of a suitable Control that I can use in my project that has similar usage?
I have a spreadsheet that has descrptions in column D. Where the descriptions are the same ,
I need the VBA code that will do the following:
1) Sort the data by columns C (descending), G (ascending) & E (ascending)
2) Putting a border around all the data where the decriptions are the same
i.e from column A to Column I beginning from row 2
I have attached a sample file for ease of reference....
I'm trying to create a formula that would check if there are similar values in a row. How should I do this? There are 20 values in a row, and they should all be different (true). If similar values are found, it should give a warning or highlight the two or more cells.
Daily We have to search the similar numbers in a enormous database (around 35000 - 45000). Base will vary daily.
The Numbers in 2nd Row of 'wish sheet' has to be compared with 'base sheet' (B,G & L columns in Base sheeet) and the similar numbers has to be copied down from corresponding 3rd row. single character variants and double charcter varients need to be found. box is made to differentiate single and double variants. The test file may be useful to identify my problem.
It is very difficult to use find Numbers manualy. We have been helped by the experts on various circumstances in the past. So, We again seeking help from our senior brothers here.
Is it possible to get multiple cells with the criteria? it always happen to only show the first cell in a column that have that criteria. For example, I have a column1 named "projects" and a columnb named "employees". How do I get all the names that have the same projects?
View 2 Replies View RelatedI have attached the file, in the last sheet (Consolidated) i need to get the data from all the previous sheets, my problem is that whenever i have similar cells the data that is showing is only the first value and not the sum of all values,
View 1 Replies View RelatedI have a list box contains of customer name and I used that to set up formula based on your selection in the list box. However, I wonder if there is a way that can select multiple customers in the list box and it will add up all that customers from your multiple selection like in the pivot slicer. I don't know if we have any formula that can do that complicated thing.
View 2 Replies View RelatedThis particular formula is used several times to gather various data points across 3 different sheets named Month-1, Month-2 and Month-3.I gather the data the following 3 formulas then sum it as needed with a helper cell.
=IFERROR(INDEX('Month-1'!$A$1:$G$6000,MATCH(TRUE,INDEX(1/('Month-1'!$A$1:$A$6000=$G$24)*ROW('Month-1'!$A$1:$A$6000)-MATCH($A96,'Month-1'!$B$1:$B$6000,0)>0,),0),MATCH($M$2,'Month-1'!$A$14:$G$14,0)),"")
[code]....
I cannot figure out how to keep my formatting in this post, so sorry for this being smooshed************
I have data that looks like this:
DISTRICTS TESTS PERCENT IN HFZ
Alphaeus District Editing BMI 100
Alphaeus District Editing CurlUp 100
Alphaeus District Editing ModdedPullUp 100
Alphaeus District Editing OneMileRun 100
Alphaeus District Editing OneMileWalk 100
Alphaeus District Editing SitAndReach 100..................................
When I try and chart it I get the whole DISTRICT label going upwards and theTESTS going sideways... causing a jumbled mess....
Is there anyway I can group these Items first so I would get something like this in my chart:
New District
test 1 bar
test 2 bar
test 3 bar
Alph District
test 1 bar
test 2 bar.......etc
Column A: List of document numbers
Column B: List of amounts
A B
111 $5.00
222 $10.00
111 $5.00
222 $15.00
I need to merge all equal document numbers so that it shows the full amount on that document number. It needs look like this in the end:
A B
111 $10.00
222 $25.00
I realize a pivot table will do this but the formatting of a pivot table will not work with what I am ultimately trying to do.